home Calculation

Christmas tree made of metal rods. Minimalistic Christmas tree made of metal and wood. Kanzashi style Christmas tree made of satin ribbon

Hello, dear readers! On New Year's Eve, an incredible amount of all kinds of New Year's decorations appear on store shelves: Christmas tree decorations, tinsel, rain, bright garlands, firecrackers, artificial and live Christmas trees, etc. Speaking of Christmas trees, nowadays manufacturers offer consumers a really wide selection of Christmas trees: tall, small, tabletop, floor, lush, elegant, white, green, multi-colored... From which we can conclude that anyone can easily choose exactly the right model of Christmas tree, which, in his opinion, will most successfully fit into the interior of a house or apartment. But today’s article is not dedicated to factory-made, stamped Christmas trees, but to exclusive Christmas trees made with your own hands!

DIY Christmas trees.

To make a decorative Christmas tree, you can safely use almost any material: rhinestones, Christmas tree balls, threads, beads, wine corks, coffee and other grains, paper, buttons, wire, cones, tree leaves, feathers, pieces of fabric, ribbons, pasta and much more!

We have decided on the materials, but how to form the basis of the future Christmas tree? You can do this in the following ways:

Select a cone-shaped bottle onto which to subsequently glue the necessary parts.

2. Buy a ready-made foam cone - sold in the “Everything for creativity and handicraft” departments.

3. Make it from a sheet of paper.

Let's look at the last point in a little more detail...

First way: take a sheet of whatman paper, draw a circle, cut it out, then on this circle we mark a sector in the form of a triangle with a pencil, cut it off, and from the remaining part we form a cone, gluing side part tape or glue.

Second way: take whatman paper, draw a circle, measure out the fourth part of the circle - a triangle (see photo), cut out this part and form a cone.

So, having selected or made the most suitable cone, we proceed directly to the decorative part...

DIY Christmas tree ideas.

Paper Christmas trees.

Selecting paper suitable shade, cut out and form a cone (described above), decorate with rhinestones, foil stars, beads, seed beads or ribbons.

DIY Christmas trees photo

Coffee trees.

We prepare a cone from thick paper, after which, using super glue, we successively fill in all the gaps on the cone; as an addition, you can use grains of rice, seeds, acorn caps, rhinestones, beads or seed beads.

DIY Christmas trees photo

DIY decorative Christmas trees made from pasta.

We select curly pasta, for example, bows, and paint them suitable color from a spray can, and after the paint has dried, we fix it on a cone (preferably dense foam) using instant glue. At the final stage, the Christmas tree can be supplemented with star-shaped pasta or small decorative bows.

Christmas trees made of threads.

We form a cone out of paper, take thick woolen threads that match the shade, cover the surface of the cone with PVA glue, and wrap it tightly with threads. Such Christmas trees can be complemented with bows, beads or rhinestones.

Christmas trees made from wine corks.

We form a Christmas tree from wine corks, gluing the corks to each other with super glue.

DIY Christmas trees photo

DIY Christmas trees made from buttons.

We prepare a large number of buttons, if you want the buttons to be the same in tone, pre-paint them using a spray can. We form a cone from thick paper and completely cover it with buttons; buttons can be glued in several layers.

Christmas tree made of cones.

We form the entire Christmas tree out of cones... starting by gluing the cones to each other from the inner circle, and finally placing the resulting tree in a pot or securing it to an improvised decorative leg made from branches.

Christmas tree decorated with sparkles.

We form a cone out of paper, finely chop the rain and tinsel, mix thoroughly, cover the cone with PVA glue and completely sprinkle with chopped glitter. Finally, we cover the top of the Christmas tree with PVA glue so that the shiny elements do not fall off.

Christmas tree made of wire.

We take a cone made of foam plastic and from top to bottom in the form of a spiral, cover it with dense wire. The result is a very stylish spring tree.

Feather Christmas tree.

We purchase small feathers in the “Everything for Creativity” departments, make a cone out of paper, and start from the bottom up, tightly joining each other, gluing the weightless feathers onto the transparent “Moment” glue.

Christmas tree made of dry leaves.

We take dry leaves or bay leaves harvested from the fall and glue them to a previously created paper cone; it is better to form a “crown” from top to bottom, gluing the leaves under each other.

In the process of creating a New Year's miracle tree, you can use various materials: coffee beans, tinsel, candies in bright wrappers, yarn, wrapping paper, buttons, pasta, lemon slices, fir cones, etc. As a rule, the base is a cone made of thick cardboard or foam.

Christmas tree made from coffee beans

We paint the cone-shaped foam base acrylic paint brown or golden color. After the paint has completely dried, you can begin decorating the Christmas tree. To do this, take silicone into a syringe without a needle and apply it to small area cone and begin to place the coffee beans tightly, occasionally diluting them with large beads.

We decorate the tree with Christmas tree beads, and glue a decorative star or large bead to the top. We make several bows from a thin satin ribbon and attach them to the tree with pins. If desired, the New Year's craft can be decorated with artificial snow made of polystyrene foam by gluing the grains using colorless varnish. Such a New Year tree will not only please the eye with its unusual design, but also fill the house with a noble coffee aroma.

Christmas tree made of wrapping paper

A Christmas tree made from wrapping paper is perhaps one of the easiest and fastest to make. New Year's crafts, which will bring a festive mood to the interior. To make such a Christmas tree, we make a cone from a sheet of cardboard or thick paper. We secure the edges of the cone with tape. At the bottom of the resulting figure, cut off all excess so that the base is even.

Place the brightly colored wrapping paper face down on a flat surface. Tape one end of the wrapping paper to the top of the cone, and then begin to slowly wrap it in colored paper. Measure out the amount of paper needed to wrap the cone and cut off the rest. We glue thin strips of double-sided tape along the edges of the paper to secure the product. We also cut off all excess at the base.

Now all that remains is to decorate the resulting New Year tree using a decorative star, sparkles, rhinestones, stickers, etc. To decorate the interior, it is better to make several of these Christmas trees at once from paper of different colors and textures, because together they will look especially original.

Christmas tree made of buttons

A Christmas tree made of buttons is beautiful and easy to make. holiday decoration which you can do with your children. To create such a decor, you will need a ready-made foam base in the form of a cone, pins and a large number of buttons of different colors and sizes. We attach the buttons to the base with pins, placing them closely. The color scheme can be any: you can make a classic green Christmas tree with multi-colored balls or use a combination of several non-standard shades.

Christmas tree made of threads

You can make a light, airy and original Christmas tree from ordinary cotton threads. The color of the thread does not have to be green. A tree made of white, golden and even burgundy threads will look no less impressive.

We make a cone from thick paper - it will serve as the frame of the future New Year's beauty. We wrap the resulting structure with cling film. Pour PVA glue into a deep plate and put a skein of thread in it so that they are properly saturated. Then we begin to wrap the cone with threads from top to bottom, leaving small gaps.

Let the craft dry, then take out the cone and carefully remove the film. We decorate the newly made Christmas tree according to our own taste: it can be snowflakes, sparkles, beads, sequins and others decorative materials. Glue a star or bow to the top. This tree will look especially impressive if you place a garland inside the structure.

Christmas tree made from a bottle of champagne, tinsel and sweets

A bottle of champagne decorated with sweets and tinsel will be a wonderful New Year's gift for a loved one. This Christmas tree is made very simply and quickly, so you will have time to decorate the gift even on the day of the New Year’s party. To do this, you need to wrap a bottle of champagne in tinsel. You need to start from the neck, gradually moving to the base of the bottle. It is better to attach tinsel to the glass surface using hot glue ( glue gun with silicone rod). The ends of the tinsel at the neck and at the base must be wrapped so that they are not visible.

Next, you need to glue chocolates in a beautiful wrapper to the bottle, which will imitate Christmas tree decorations. The top of the New Year's souvenir can be decorated with a beautiful bow to match the candy wrapper or glued soft toy- a symbol of the coming year.

Christmas tree with lemon slices

For fans of eco-style and lovers of citrus aroma, a Christmas tree made from lemon slices will be a wonderful gift for the New Year. Before you start making a Christmas tree, you need to dry the lemon slices. To do this, cut the lemons into thin slices and dry them naturally or in the oven.

When main element The crafts will be ready, coat the cone-shaped Christmas tree frame with glue and wrap it with rope to hide the gaps between the citrus slices. Then we begin to peck the base with dried lemon slices, trying to place them as close to each other as possible. We decorate the gaps with other natural materials: pine cones, nuts or dried berries.

Sisal Christmas tree

Sisal is a material with an unusual texture, so crafts made from it have a very original look. A Christmas tree made of sisal will look especially impressive in the interior. To make such a tree, you need to paint whatman paper in the color of the selected sisal. When the paint is dry, roll the paper into a cone and secure the edges with glue. We cut out the base for the cone from thick cardboard. After this, we take the iron wire and thread it through the cone, securing it with tape at the top.

We cover the frame for the future Christmas tree with a thick layer of sisal. You should start winding from the top of the head: first we wrap the end of the metal wire, after which we smoothly move to the base of whatman paper. We glue the ends of each strand of sisal to the cone, and cut off everything that remains sticking out to the sides. To give the sisal Christmas tree a neat look, lightly press it with your hands.

The next step is making a stand for the Christmas tree. To do this, take a plastic cup and Chinese chopsticks. We connect the sticks together and wrap them tightly with thread. To ensure that the tree stays well inside the pot, we place a piece of polystyrene foam in it. We insert one end of the trunk made of wooden sticks into the cardboard base of the Christmas tree, and the other into a cup with foam plastic. We glue cotton wool inside the pot, which will imitate snow cover. The sisal Christmas tree is ready, all that remains is to decorate it with sparkles, stars, beads, bows, flowers and other trinkets.

Christmas tree made from pasta

A Christmas tree made from pasta looks simply gorgeous; you can use it to decorate a New Year's table or present it as a gift. New Year's gift. To create such a Christmas tree you will need pasta (spirals, tubes or bows), acrylic paints and a cone-shaped cardboard base.

It will not be possible to attach the pasta to the base using PVA glue; a glue gun is best suited for these purposes. Pasta should be glued from the base of the cone, gradually rising at the top. When the craft is dry, paint each “twig” of pasta with acrylic paint.

If you don't plan to use decorative elements, then it is better to paint the product with gold or silver paint. A green Christmas tree can be decorated with rhinestones, beads or bows. Pasta of a different shape and color will look especially original as a decoration.

Felt Christmas tree

You can also make a cute Christmas tree from pieces of felt fabric. For crafts, it is better to use several tones of the same color - this will give the tree a more natural and voluminous look. The felt color does not have to be green; non-standard shades are welcome. First you need to make a cone-shaped frame from cardboard or foam. Then I cut out circles of different diameters from scraps of felt fabric. To do this, use pre-prepared templates in the form of cardboard circles.

We decorate the bottom of the cone with tinsel. We make a small hole in the center of each circle. Next, we begin to gradually string fabric circles onto the cone, alternating them in size (from largest to smallest). Glue a felt cone to the top of the tree and decorate the finished tree to your liking.

Christmas tree made of Christmas balls

A Christmas tree decorated with balls looks beautiful, elegant and festive. Imagine how bright and impressive a Christmas tree made entirely of Christmas balls will look. To work, you will need a foam cone, a glue gun and Christmas balls of different colors. You should start gluing the balls to the base from the bottom, moving in a circle and alternating different colors of New Year's balls in a certain order. We decorate the top of the resulting tree with a star or snowflake. The gaps between the balls can be disguised with tinsel, Christmas tree beads, scraps of organza or lace fabric.

Video on the topic

Good day, friends!

Soon, soon New Year!
He's in a hurry, he's coming!
Knock on our doors:
“Children, hello, I’m coming to see you!”
We are celebrating the holiday
Decorating the Christmas tree
Hanging toys
Balloons, crackers...

This is how I decided to start today’s post in an unusual way. Which will be dedicated to making them at home. After all, we all traditionally love to give them for the New Year. Namely, I suggest making a Christmas tree from what you have on hand. It can be anything, for example, paper, cotton pads, dry twigs, etc. After all, we all dream of surprising our loved ones with something special and unique. Therefore, if you are still thinking about what to give to mom, dad, etc. then you have a ready-made solution).

Of course, every home on New Year's Day has a brightly decorated living “forest beauty” that flickers and blinks with multi-colored lights. I suggest making a “little girlfriend” so that she doesn’t get bored. And behind one, your decor in the rooms will be transformed, or perhaps you will place it on the holiday table.

Besides this creative work will bring a lot of positive emotions, and will delight children. Moreover, the winter evenings are long, and you can afford to create something beautiful and green).

Although it doesn’t have to be exactly this color, white is also in fashion. The tree will look as if it is covered in snow or frost.

I’ll start with perhaps the most grandiose and magical tree in my opinion. I suggest you look and study these instructions in order to create such a funny and cheerful beauty for yourself or someone else as a souvenir. The work is made of sisal, who does not know this coarse fiber of a tropical plant.

On a note. A special feature of this craft is the presence of funny legs instead of a stand. And if you remove them, you get topiary, which can be made from any material, for example, coffee beans or thread.

Well, start taking action by looking at these pictures and detailed description.

We will need:

green sisal – 25 g
Kinder Surprise cases
heat gun
Styrofoam
wire
green pencil - 2 pcs.
colored paper
green threads
decorative braid
any decorations such as balls, beads, etc.
cardboard

Stages:

1. Take the Kinder case and cut off the lid. For the small part, cut off a small section on one side with a semi-oval, so that you can glue it together later.

2. Using a glue gun, glue the two parts together. This is how the boot will turn out, top top.

3. You should end up with two identical shoes. Make a hole in the largest bottle opener. Have you guessed what it is needed for?

4. Now let’s decorate the shoes. To do this, take a red sheet and cut out two strips 19 cm long and 2 cm wide.

5. Glue the longest strip, wrapping it completely around the shoe and giving it the desired shape.

6. Then glue decorative tape along the entire diameter of the sole for a beautiful appearance.

7. Then take your pencils.

8. Poke them into the prepared holes, and add a little glue so that they hold tightly. The legs are almost ready.

9. All that remains is to decorate them with tinsel, do as shown in this photo below.

11. This is what should come out. What does it remind you of already?

12. Now take the wire and insert it into the tip of the cone. Wrap it in sisal too and tie it with thread.

13. The next step is to make a skirt for the stomper. To do this you need to make pounds. Make rectangles of fabric measuring 10 cm x 9 cm, their number should be from 60-80 pieces. depending on the fullness of the skirt.

14. Then start gluing with a hot-melt gun. In this order. Bend the rectangle in half, but along an oblique line. Secure with glue.

16. Then lift the right edge and glue it together.

17. The funnel is ready. It's really a funny name, even a little funny.

18. Then start assembling the Christmas tree. Glue the blanks in a circle.

19. To create a skirt later.

20. Insert the legs into the base.

21. Then use your imagination and get creative, glue on various kinds of decorations.

22. Glue a bow with beads to the top of the spruce and wrap it around the craft.

23. There will also be snowflakes and rhinestones here. Place the resulting masterpiece on a stand. Good luck.

How to make a voluminous Christmas tree out of paper at home

I think that many have ever thought about this question. After all, schools and kindergartens often give assignments on this topic. I suggest making, for example, a silhouette Christmas tree. To do this, take this sample and print it on office colored sheets.

Afterwards, cut out with a stationery knife and glue the blanks together. Use special clamps for this.

You can make a whole forest of such colorful coniferous beauties.

The following work will be completed in 5 minutes. Don't believe me? It couldn’t be simpler; you will need circles of colored double-sided paper and a pencil on a stand. The diameter of the blanks you see below:

1. Fold the circle in half with your hands, so that you get a semicircle.

Do exactly that! Carefully iron the fold with your hands.

2. Now fold the semicircle in half again.

4. And in the same way two more times.

6. And this is what happens. Carefully trim the ends of each piece with scissors.

7. Start assembling the product. Place all the blanks on a stick. From the largest circle to the smallest.

8. The only thing missing is a star or Santa Claus.

I especially found a video for you so that if you need it, you can, in addition to everything else, roll up a grandfather out of paper. A new article will be released soon, in which you will find many works with this hero, but for now, watch the story.

For those who found the first option quite easy and simple, you can take and fold a Christmas tree in origami style; for instructions and description, see below in this film.

Christmas tree made of beads for beginners (diagram inside)

The next creation of nature is wow, cool and at the same time elegant. And such a souvenir will last for more than a dozen years. This is a spruce made of beads. I thought it was impossible to make such a tree myself. But as it turns out, I was wrong. I am sure you will cope with such work with a bang.

We will need:

green beads – 7 shades
white beads or transparent
plate from under the flowerpot
acrylic paint: white and brown
wire 0.4 mm
PVA glue
ruler
rod 4 mm and length 2 cm
tape
alabaster

1. Place the beads in a cup and mix all the colors. Place beads on the wire in different color sequences and measure 2.5 cm using a ruler. At the same time, leave the edge in the region of 5-7 cm without beads.

2. Make a loop for four circular turns.

3. From the loop, step back 2 cm of wire free and without beads of wire and again count 2.5 cm and make a loop.

4. For the smallest branch, wind 7 loops in this way. Then find the middle and fold it in half and twist the elements together.

5. Thus, you should have this number of branches.

7. Now take the rod and wrap the tape, and then 4 branches with 7 loops to it. The first one is in the center, and the rest are placed below in a circle, twist the stick and wrap it with tape.

6. Next, take 6 branches of 9 loops each. Wrap them in a circle in two tiers of three branches, wind them in a circle. Then step back down about 7 mm and take 5 branches of 11 loops each and wind them in one tier.

7. Retract 7 mm again and wind 6 branches of 11 loops each and again divide them into two tiers. And so on. The final stage is 5 branches of 7 loops.

Rewind the remaining barrel with brown tape. Spread the branches to make the tree lush.

8. Bend the table at 90 degrees and place it in a cup from under the flowerpot. Pour alabaster solution into it and let it dry.

9. Wait until the tree sets; you can also plant any symbol of the New Year. For example, a pig or a rat.

Make a thick solution of PVA glue and alabaster, dip it in a kitchen napkin and glue it to the trunk. To get a natural look.

10. After complete hardening, start painting, but first remove the product from the cup. Paint the trunk brown and the platform white.

11. Decorate with large beads in the form of toys or something else.

Now a few more instructions that I found on the Internet.

But this model is somewhat similar to the first one, maybe someone will like this one more.

And look how lovely it is.

Well, in conclusion, I would like to show one more example of a flat spruce tree, which you can use as a pendant or keychain.

Kanzashi style Christmas tree made of satin ribbon

Well, friends have now reached another elegant option, which looks quite bright and elegant. The green beauty turns out beautiful and lush. But first, you must master the kanzashi technique; for this you need to learn how to make special blanks in the form of triangles. Take a look at the diagram, if it is not clear, you will find more detailed master class for making such things.

You have to take a green satin ribbon, cut it into pieces measuring 5 cm x 5 cm and repeat all these steps.

Or consider this tip.

Thus you will need:

cone made of thick paper or cardboard
satin tape
star
scissors
wire
candle
heat gun

Stages:

1. Prepare everything you need for work. Place the gun to warm up.

2. Carefully and slowly glue the fabric blanks to the surface of the green cone in a circle and in a spiral.

3. Try to place all the triangles fairly close to each other. After the product is ready, take a star or any bow and glue it to the wire.

4. Place the ornament on the top of the tree. Decorate the souvenir with beads; they will act as a garland.

I came across a more simplified version of the craft in this film, perhaps you will also like it and you and your children will master this technique. Good luck!

Spruce made from cotton pads: a craft for kindergarten children

Now let's get acquainted with a fairly simple craft that you can easily do with your child at home or in a kindergarten class. This option is so lightweight that it is suitable for any junior group or older.

For creativity, you will need to decorate cotton pads with green gouache. Let them dry completely. Then roll it into a petal and secure it with glue.

Since a Christmas tree is usually made for the New Year, let’s glue the snowdrifts on the blue background sheet first of all. And then arrange and glue the green blanks in the desired sequence in descending order.

You can also get creative and build a snowman or other character. Give free rein to your imagination and the souvenir or postcard will be ready.

It is with these triangular blanks that you can build other options.

The next option, for which you will need the materials you see in this picture. Make a bag out of cardboard, glue the parts with double-sided tape, and make the bottom even.

And then dilute the blue gouache in some water and dip a cotton swab in it. Draw dots along the outline of the disks.

Then glue the round pieces onto the cone, overlapping one on top of the other.

Then decorate the craft to your taste. Winter beauty is ready. What do you think of the idea? The truth is super and fast and cool!

You can go another way: fold each disk in half three times and fasten it with a stapler. Then glue these triangles onto the white cone. And then decorate the Christmas tree with beads and a star.

Or you can also go the other way, make a three-dimensional craft by cutting a cotton pad into four equal parts. See it all for yourself below:

The youngest assistants can be asked to do this kind of work.

Forest beauty made of spruce and pine cones

Of course, not a single New Year's holiday is complete without tangerines and, of course, pine cones. So why not use that too. After all, such natural material It’s easy to collect in a forest or park, and then sit down and make it.

We will need:

gun
scissors
cardboard
bumps
varnish in a can

Stages:

1. Make a cone from a sheet of A4 paper and glue the ends together. Let me remind you how to do this. Draw a circle, and then cut it in half, coat the walls with glue and let dry.

2. After starting to assemble the product, glue the cones to the workpiece in a spiral. So until the product takes on a finished form.

3. Coat with glitter varnish for durability.

4. Cut out a star from a shiny lid or any other material.

5. Decorate the top with it.

You can go another way and make such a forest charm from husks. Also glue a cone out of paper.

And it is on it that, using a glue gun, glue the particles in a spiral, one after another.

For completeness, decorate with beads or other decorations that are typical for this holiday. For example, tinsel and stars.

Christmas tree made from candies (step by step instructions)

Do you like sweets? Oh, and I just love them. I propose to lay out the symbol of the New Year from them, and take a bottle of champagne as the base.

1. Glue the green fluffy tinsel onto the champagne in a spiral using a glue gun.

2. As soon as the first row of tinsel is glued, glue the candy wrappers (tips) at the same distance.

3. And then add something else, for example a bow.

4. Well, how do you like this wonderful idea? Cool, congratulations to the author! It’s not a shame to go on a visit with such a souvenir).

DIY sisal Christmas tree

Preparations for the New Year are in full swing, so let's do something interesting from such material as coarse fiber. Nowadays it is often used because it is not very expensive, and everyone wants to create with it.

We will need:

sisal fiber green and white
filler
bamboo stick
plastic cup
cardboard
satin tape
scissors
decorative elements: bows

1. Fold a cone from a sheet of cardboard and glue it together. Place the filler in it and insert the stick. The wand will need to be decorated with a satin ribbon. Secure the ends of the tape with glue.

2. Also add filler to the glass and put something heavy on the bottom, such as coins. Use corrugated paper or other material to decorate the glass; it will act as a stand. You can also put a piece of foam rubber on top, for strength, and make a hole in it for the stick.

Insert the prepared cone on a stick into the stand.

3. Roll the sisal into balls by hand.

4. Glue them to the workpiece in different combinations, I mean color. Alternate at your discretion.

5. Now dress up the beauty and sprinkle a little glitter polish. All that remains is to admire or give this masterpiece to someone.

Video on how to make a decorative Christmas tree from threads and PVA glue

And another little beauty that will fit very nicely into any interior or will be an excellent gift, like a miracle made of thread. Watch this story and follow all the steps from the author.

I decided to prescribe the next option for you, please read.

We will need:

PVA glue
threads
foil tape
disposable cup
cardboard or old box
plastic bag
battery operated candle

Stages:

1. Form a cone out of cardboard and glue it with foil tape. Dry. Then put a bag on the geometric figure, fix it even inside, otherwise it will fidget around the workpiece.

2. Place the threads in PVA glue diluted with water (50 to 50). But before that, make a hole in the cup right at the base and thread a thread into it.

3. Fill the cup with glue solution so that the entire thread is covered in glue.

4. Now start winding the thread around the cone in a spiral.

Important! The thread should not be too tight; it should lie easily on the surface of the cone.

3. So in the end you will get new souvenir, cut the thread. Leave to dry.

4. After drying, remove the Christmas tree from the workpiece; the PVA will dry and become transparent.

5. Decorate the gift with sequins and then turn on the battery-powered candle and place it in the very base.

6. The Christmas tree will twinkle and act as a mini-lamp or garland.

Craft for the school competition “Tinsel Tree for New Year 2020”

Now we move on and perform the symbol of next year using ordinary tinsel. Still, such material is also an indispensable attribute. Do you agree? Plus it looks really beautiful and charming. Take a look for yourself.

We will need:

tinsel of different colors
cardboard - 2 pcs.
glass or pot
foil sleeve
glue gun and PVA glue
scissors
thread with needle
wire
any decorations, lace fabric, bell, balls, etc.

1. Make a cone out of cardboard, take it green.

2. Then cut out a circle from another sheet, 1.5-2 cm larger than the diameter of the geometric figure.

3. Then make these slits on it.

4. On a round piece, trace a sleeve in the middle so that you can cut a suitable hole.

5. Glue the circle to the cone. This is what will happen in the end.

6.Wrap the sleeve with decorative tape and insert it into a cup of plaster.

7. Make a skirt out of lace, assemble it with a needle and thread to make it airy and fluffy.

8. Glue in two tiers to the green blank. Cut the tip of the cone and insert a wire with a bell into it.

9. Now take a glue gun and use it to fix the tinsel in a spiral.

10. Then glue on balloons and other decorations such as beads. Your magical miracle is ready. Create for your health!

Video tutorial on making a New Year's tree from foamiran

If you want something unusual, then I am glad to present you with another little green joy. It will be needle-shaped, and the material will be foamiran. It is quite unpretentious, easy to work with and the most important advantage is that it does not crumble. So, go for it.

Don't forget to use for decoration artificial snow, which will give the spruce unprecedented beauty and brightness.

Vintage corrugated paper Christmas tree

Now there is one more craft that you can also take and perform for an exhibition in a kindergarten or school. The technique will be trimming. Are you familiar with this method? I hope it's very good. And if not, then you will find out now. For work you will need corrugated paper, PVA glue, scissors, and a cardboard cone. And of course, a good mood.

1. So, take a cone to work with. This is what we will be processing now.

2. But before you do this, cut the corrugated squares: 1 cm x 1 cm, 2.5 cm x 2.5 cm, 3 cm x 3 cm, 4 cm x 4 cm, 5 cm x 5 cm, 6 cm x 6 cm.

You can replace corrugated paper with regular paper napkins.

3. Take a small square and wrap it around a stick, then dip it in glue and glue it onto the cone.

4. In this way, fill the entire geometric figure and move in a circle.

5. Take the smallest squares first, then larger and larger ones.

6. You can also make a star out of paper on the top of your head. Or take it already ready-made option from the shop.

This is the kind of wonderful green souvenir you should end up with. Don't forget to decorate with any beads or rhinestones.

Creative spruce made from plastic bottles

I think that in any home there is plastic bottle. Take it light green in color. The steps are quite simple, do it with your children to occupy your family leisure time.

Stages:

1. Cut out the middle of the bottles, and then cut it into pieces.

2. You should end up with rectangles like this. From which the branches for the Christmas tree will be made. Their sizes are:

8.5 cm x 6 cm – 6 pcs.
7 cm x 6 cm – 6 pcs.
6.5 cm x 6cm – 5 pcs.
6 cm x 6 cm – 5 pcs.
5.5 cm x 6 cm - 4 pcs.
5 cm x 6 cm – 4 pcs.
4.5 cm x 5 cm - 3 pcs.
4 cm x 5 cm – 3 pcs.
3 cm x 3 cm - 3 pcs.

3. Round each rectangle, bend the tip, and cut after the edge, as shown below.

4. For curl, scorch the fringe with a candle.

5. And then paint the fringes with acrylic paint or nail polish. Pollinate with glitter.

6. Thus, you should make this number of branches, and make a hole on each branch.

7. Then take a stick and stick it into the bottom of the bottle. This will be a stand for a souvenir. Make the hole using a drill.

8. Well, now all that remains is to assemble the Christmas tree, thread the branches onto the stick.

9. Looks chic and attractive.

10. Decorate with a bow and beads. Give such a masterpiece to your friends or keep it for yourself for the New Year's table. Product height 20-25 cm. Cool!

Christmas tree for New Year 2020 from scrap materials (100 ideas)

The time for miracles has come, and so let's get your apartment today. Which each of you can create yourself. For example, you can use this idea and decorate the walls in any room. Such a nice craft will lift everyone's spirits. You can make such a drawing in a school classroom or even a hall kindergarten. In principle, anywhere, even in the office.

Such hanging Christmas trees look elegant, and they can be made from anything, as in these pictures. These could be chopsticks or even utensils, take a look:

Or decorate the figure with any lamps or New Year's garlands.

A souvenir with your photos and images on it looks cool.

And also perform illumination. Wow, it's especially breathtaking dark time days when it is already evening or night.

You can add spruce branches or use them to do the work.

You can also create an elegant composition even from ordinary sheets of magazines.

From ordinary leaves for notes you can also make a craft in the form of a Christmas tree, both three-dimensional and for the door.

It has now become fashionable to make compositions on doors or walls. Here's an example from old book pages:

But even in stores they make such wonderful decorations from the books themselves.

Again, depending on where you work, if it’s a clothing and shoe store, then you can disguise the mannequin like this.

In addition, you can also take ordinary wine corks from waste materials and voila, a new masterpiece.

Or use the simplest idea - draw a Christmas tree.

Or make the desired shape using the template.

Well, if you are a very creative person, you can even do the work from machine tires or plywood.

If you work in a hospital or your specialty is related to medicine. Then you can put it this way:

And from ordinary wooden blocks it is also possible to create something beautiful, as shown in this picture.

You can also turn an ordinary stepladder into something very cool, take a look, what does it remind you of?

They even make Christmas trees out of plastic or paper pipes.

And here is another souvenir made from disposable plates.

Or line it with fabric and modern glass marbles.

Or use bows.

For those who are interested in needlework (for example, you can take foamiran or felt) or knitting:

New Year's toys are also used to hang such cool little things that resemble a forest beauty.

This is where the wire was used.

And here they made a cardboard frame.

Crafts are also made from ordinary napkins and newspapers.

Or use scrapbooking paper.

Once I even saw a gorgeous creation made from egg cups.

You can also create a masterpiece out of pillows.

The most original crafts You can designate these ones, from bottles.

Here’s another idea from jelly jars or take any containers.

With the kids you can easily make a Christmas tree out of plasticine.

By the way, you can create sweet masterpieces that are also edible. You will need waffle cones and cream.

And here is another beauty, which is made of sweets or cookies.

You can create unusual souvenirs from fruits and berries. I think that children will not resist such beauty and will immediately want to try it on their tongue.

Here's another pasta idea.

And you won’t even believe it, they create products from disposable spoons and forks.

Here is another work made from wool balls and buttons in the shape of a cone.

And here, look, shells were used.

This masterpiece looks quite unusual; it is made of feathers.

Or from a material such as floral mesh or sisal.

Here are a couple more ideas.

That's it, friends, that's all I have. The post turned out to be quite long, but I hope that you found what you were looking for. Create such wonderful decorative Christmas trees yourself or together with your children and be happy. After all, such a souvenir always exists and will be the main attribute of the New Year.

I wish that all your dreams and expectations come true in the near future. Good luck everyone and have a great day! Bye.