Gas water heater baxi sig 2. Gas water heaters Baxi: models and causes of their breakdowns. Possible problems and their resolution

Wall gas instantaneous water heater(gas water heater) Baxi SIG-2 11i (manufacturer: Italy) with a power of 19 kW with an open combustion chamber is an ideal solution for houses without central hot water supply and for replacing outdated gas water heaters. These water heaters have automatic electronic ignition (one 1.5 V battery) and can be used for domestic use, thereby providing the consumer quick cooking hot water. Gas water heaters SIG-2 series are equipped with a multi-level security system, which guarantees high level protection in case of emergency or emergency situations. There is also a digital display to continuously display the hot water temperature.

Online store heating systems and hot water supply, the site offers to buy a Baxi SIG-2 11p geyser at the lowest price with delivery in Moscow and the Moscow region.

Geyser BaxiSIG-2 11i will be an excellent choice for apartments and private houses where there is no centralized supply system hot water. This model is equipped with electronic control and convenient digital display. The water heater is equipped with ionization flame control, a thermostat for flue gas removal, and a hydraulic group made of brass. Has a gas pressure reducer.

Features of gas instantaneous water heaters from trademark Baxi:

• Open combustion chamber;
• Automatic electronic ignition (SIG-2 11i, SIG-2 14i);
• Piezoelectric ignition with pilot flame (SIG-2 11p, SIG-2 14p);
• Modulation burner with smooth power adjustment depending on the water flow through the water heater;
• The built-in gas pressure reducer allows operation in the range of 13.5 - 20.0 mbar without readjustment;
• Universal burner made of stainless steel;
• Brass hydraulic group is resistant to scale formation;
• Highly efficient, heat-resistant copper heat exchanger with a protective coating against condensation during cold starts;
• One 1.5 V battery (SIG-2 11i, SIG-2 14i);
• Can be reconfigured to run on liquefied gas.

Baxi gas water heaters are highly efficient and reliable, made from high-quality materials; their main task is to prepare hot water for its further use by people for various purposes. Gas boilers more economical to use and achieve decent performance with minimal resource consumption.

Water heaters have a fairly wide range of applications, and for a number of reasons they are much more practical than full-fledged boilers. But even outstanding structures can break. And traditional European quality, alas, does not guarantee complete protection from such problems.

Peculiarities

It should be noted that Baxi produces not only instantaneous, but also storage water heaters. But still, a considerable part of customers prefer speakers in the traditional sense of the word. Until recently, the products of the Italian brand in Russia belonged to the premium segment. But after the recent relocation of production facilities to Iran, the total cost of goods has decreased markedly, while the level of quality has not changed.

Modifications and alternatives

Before talking about the speakers themselves, it is worth paying attention to alternative offers from the same concern. Storage water heaters of the Italian company are represented by the SAG3 model. These devices are suitable for both domestic and industrial sectors. According to the manufacturer, using them to replace outdated heating equipment means ensuring a stable supply of large quantity water.

The design difference is:

• open type gas combustion chamber;
• piezoelectric ignition;
• autonomy from power supply;
• high-quality enamel on the walls storage tank, reliably inhibits corrosion;
• Possibility of installation both on walls and on the floor;
• environmentally and sanitary-neutral thermal protection.

But there are situations when neither such equipment nor the outdated model of the Main 24 fi boiler suits consumers. In such a case, a Baxi gas water heater comes to the rescue, providing flowing water. The Italian company has developed a family of SIG-2 devices for this purpose. All of them are equipped with a combustion chamber open type, but there is a certain difference. Thus, models 11i, 14i are equipped with an automatic ignition module, and the 11p version uses a piezoelectric method for generating a spark.

The energy-dependent modification 11i receives electricity for igniting gas from an Lr20 format battery supplied with the column. The system is equipped with a module that monitors air ionization characteristic of a burning flame. If it goes out, the automation sends the appropriate commands to the working nodes. The 11i device is capable of providing a rated thermal power of 22 kW and supplying 11 liters of heated water per minute. For the 14i version, these parameters are 29 kW, 14 liters of water.

Automatic Baxi models are equipped with a liquid crystal screen on the facade, which shows:

• preset water temperature;
• its achieved level;
• conditional error codes.

As for the mechanical controls, two of them are located on the body, respectively setting the heating of the liquid and its pressure. Manual ignition on the 11p model is achieved through the use of a prepared piezoelectric element and a control button inserted into front panel. The advantage of a non-volatile design is its relative low cost, which is achieved, among other things, by eliminating the digital screen. The system has a thermal rating of 22 kW and a water output of 11 liters in 60 seconds.

Automatic speakers are equipped with:

• hydraulic valves;
• traction indicators;
• copper heat exchangers;
• devices that regulate water temperature;
• Setaak gas pressure indicators;
• economizers.

The copper heat exchanger is harmoniously coupled with a hydraulic group made of high-quality brass. Sami gas-burners are made from stainless steel. Any Baxi speaker is equipped with devices that provide smooth modulation of the assigned power. A reducer that controls gas pressure is also built into them. Automated models monitor the fire using an ionization element, and piezoelectric models are equipped with a thermocouple.

Specifications geysers cannot be fully described without mentioning the dimensions of the device. The 11 l model has dimensions of 58.2 x 31.4 x 24.5 cm; in the version designed for a flow of 14 l, they are increased to 65 x 36.5 x 24.5 cm. The cross-sections of the chimneys in these cases are 11 and 13 cm. Connecting both water and and gas occurs using fittings cut into ½ inch. If you change the jets, Baxi geysers can be converted from natural to liquefied fuel.

Possible problems and their resolution

Even the best Italian speakers can have some technical problems. Troubleshooting directly depends on what type of equipment it is.

If there is no spark at SIG 2-11p, the reasons may be due to:

• disconnected wire of the piezoelectric part;
• impairment of her own performance;
• poor connection of the piezoelectric element;
• electrode deformation.

A different approach is needed when column 11i, 14i does not light up. First of all, it is worth checking the health of the batteries. After this, inspect the wire through which current flows to the electrode. Additionally, you will have to examine the electrode itself, the automation, and the membrane. Such manipulations and subsequent repairs (replacement) must be performed by trained specialists.

The user himself can create the required water pressure by turning the regulator to the extreme position. It happens that a spark seems to jump, but you still can’t turn on the column. Very common cause the ignition nozzle turns out to be contaminated, which is purged and cleaned mechanically. You should also check whether the electrode responsible for ignition is positioned correctly.

Additional measures include checking the opening of the gas valve, removing air trapped in the gas pipeline and replacing the problematic electronic unit. When the igniter burner goes out randomly, you will have to change either the thermocouple or the coil. Judging by customer reviews, sometimes it is discovered that the fuse is burning, but it does not initiate the combustion of the main torch. The solution to the problem is to increase the water pressure in the system or replace the worn membrane. Sometimes another problem occurs: even when the water is stopped, the burner does not go out.

The first step is to clean the gas valve seal. Then disassemble the piston or rod in the water valve; if cleaning them does not help, these parts will have to be replaced. The next step involves checking the functionality of the microswitch lever (only for automatic models). Devices operating on liquefied gas may experience a similar problem if the regulator does not operate correctly. Too long ignition, accompanied by flapping in the burner, can be “cured” by adjusting the flame strength, cleaning the fuses and injectors.

In the case when the heat exchanger plates become clogged too quickly, it can be assumed that the reason is insufficient draft or dust in the room. Inspect the chimney and increase the draft level if necessary. You can fight yellow flames if you use only the type of gas for which the column is configured. Cleaning the burners also often helps. The appearance of a gas smell means it is necessary to inspect the gas pipeline and all joints using a soapy solution, following standard precautions.

It happens that the “aroma” of gaseous combustion products spreads throughout the room. They begin to eliminate the problem by checking the draft in the chimney and the quality of smoke removal. It is also worth assessing whether gas consumption has increased excessively, because intense combustion may exceed the evacuation capacity of the chimney. If, when a new battery is inserted, the column screen shows the temperature sensor readings, but the system does not operate when the hot tap is opened, you need to adjust the screw that presses the pusher button to the microswitch lever. Strict adherence to these recommendations will significantly extend the life of the column and get the maximum benefit from it.

For information on the main malfunctions of the Baxi ECO 4s gas boiler, see the following video.

You can pick up the purchased product yourself or use the delivery service in Moscow and the Moscow region. By placing an order today, you will receive it at your disposal tomorrow. If necessary, you can use the prompt delivery service and receive your products today.

Delivery to the entrance (check with the manager about the possibility of lifting to the floor)

Delivery is made daily from 9 to 21 o'clock , including weekends and holidays.

Check with the manager for exact delivery times!

Pickup points

Delivery cost in Moscow and the Moscow region:

• Within the Moscow Ring Road - from 0 to 500 rubles, (individual delivery cost is indicated in the product card)
• Outside the Moscow Ring Road up to 10 km - 700 rubles,
• Beyond the Moscow Ring Road further 10 km - 700 rubles + 30 rubles for each kilometer.
• To the regions, delivery by a transport company (calculated individually).

Delivery cost for

km from MKAD

700 rub.

Unloading of large-sized goods is carried out by the efforts and means of the customer.

The money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to the simplicity and convenience of calculation.

Payment by bank card to the courier upon receipt

Couriers have a portable banking terminal, which allows clients of the Teplovod-Service company to pay for goods with bank plastic cards (check with the manager about the possibility of paying by bank card).

Payment by credit card on the website

To select payment using a bank card, on the “Cart” page, you must select the “Payment by bank card on the site” item.

Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:

After clicking on the “ONLINE PAYMENT” button, you will be redirected to the payment gateway of Sberbank of Russia OJSC to enter your card details.

Please prepare your plastic card in advance. Additionally, you need to enter your full name, email, contact phone number, and reservation number to identify the payer. The connection to the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.

If your bank supports the Verified By Visa or MasterCard Secure Code technology for secure online payments, you may also need to enter a special password to make a payment. You can check the methods and possibility of obtaining passwords for making online payments with the bank that issued the card.

This site supports 256-bit encryption. The confidentiality of the reported personal information is ensured by Sberbank of Russia OJSC. The entered information will not be provided to third parties except in cases provided for by the legislation of the Russian Federation. Payments by bank cards are carried out in strict accordance with the requirements of Visa Int payment systems. and MasterCard Europe Sprl.

When paying by credit card, no interest is charged.

Payment is a transfer Money from the buyer's current account to the seller's account, we work on common system taxation including VAT. Delivery of goods is carried out after receipt of funds to the account of the company Teplovod-Service LLC. This method is used for calculations by legal entities.

Our details

Limited Liability Company "Teplovod-Service"

OGRN: 1105003006162

Taxpayer Identification Number: 5003088884

checkpoint: 500301001

BIC: 044525225

Bank: PJSC “Sberbank of Russia”

R/s: 40702810838060011732

S/s: 30101810400000000225

Legal address: 142718, Moscow region, Leninsky district, Bulatnikovskoye rural settlement, Warsaw highway, 21 km., office B-6

Special conditions

For goods with the status "To order" worth up to RUB 100,000. no prepayment required.

For goods with the status "To order" over 100,000 rubles. An advance payment of 30% is required.

• For any product sent by a transport company, 100% payment is required.

Description

Baxi SIG-2 11 i is a gas instantaneous water heater designed for use in everyday life: in apartments, country houses or at the dacha. This model is capable of extremely quickly preparing the required volume of hot water, while differing compact size, ease of installation and maintenance.

Like other models from the “i” series, this water heater is equipped with electronic ignition and an ionization flame control system.

Advantages of the Baxi SIG-2 11 i geyser

The water heater is based on an open combustion chamber and is equipped with an electronic ignition system. The power can be adjusted very smoothly thanks to the presence of a modulating burner. The Baxi SIG-2 11 i water heater is perfectly adapted to domestic conditions, operating stably in the range of 13.5 - 20.0 mbar without reconfiguration due to the use of a built-in gas pressure reducer.

A universal stainless steel burner, a brass hydraulic group resistant to scale formation and a heat-resistant copper heat exchanger with a protective coating against condensation will ensure a long service life of the column. If necessary, the Baxi SIG-2 11 i water heater can be reconfigured to operate on liquefied gas.

This model is characterized as one of the safest in its class, equipped with several protective equipment:

• draft sensor - a thermostat that guarantees the safe removal of combustion products and instantly stops the gas supply to the burner in case of obstruction of the chimney (clogging, strong wind);
• ionization flame control;
• knob for regulating gas flow and power;
• digital display indicating the current water temperature;
• knob for regulating water flow and temperature.

The water heater is supplied with two control knobs, a filter (inserted into the fitting at the water inlet), a fitting with a gasket (attached to the input of the pressure regulator), an LR20 D 1.5 V battery, and hooks for hanging.

To know Additional information You can learn more about this model and buy a Baxi SIG-2 11 i gas water heater from the sales department.

Download instruction manual

Functional diagram of the Baxi SIG-2 11 i column

1. Smoke hood 2. Traction sensor 3. Water overheating sensor 4. Heat exchanger 5. Main burner 6. Flame control electrode 7. Pilot burner 8. Ignition electrode 9. Injectors 10. Hot water outlet 11. Gas pressure meter 12. Temperature regulator 13. Venturi nozzle 14. Water knot 15. Water valve 16. Water filter 17. Membrane 18. Cold water inlet 19. Power regulator 20. Gas unit 21. Gas valve block 22. Gas filter 23. Battery 24. Control unit 25. Microswitch 26. Water temperature sensor 27. Gas control valve 28. Bypass 29. Water flow regulator 30. Soft ignition valve 31. Interchamber valve 32. Ignition valve 33. Main gas valve