home Porch and entrance

Gas instantaneous water heater Electrolux nano plus 265. Reviews of Electrolux geysers. Comparison with competitors

GWH 265 ERN NanoPlus - a gas water heater with electronic ignition of the burner is easy to use. The burner ignites automatically when the hot water tap is turned on, then the heating power and water temperature are regulated using ergonomic handles on the front panel management. The presence of flame is monitored by an ionization control unit. The productivity of the NanoPlus geyser is 10 liters per minute.

In this model, the gas burner is made of high quality stainless steel. In the GWH 265 ERN NanoPlus model, the chimney diameter is 110 mm, which makes it possible to connect to almost any exhaust system.

Heat exchanger

In geysers GWH 265 ERN NanoPlus, the heat exchanger is made of high quality oxygen-free copper using OXYGEN FREE technology, which maximizes its resistance to oxidation and high temperatures during operation and does not require the application of any additional protective layers.

The heat exchanger in NanoPlus geysers does not contain lead and tin, which indicates its safety for human health and environment, as well as high reliability and durability.

Digital display

The control panel of the GWH 265 ERN NanoPlus geyser has a modern digital LCD display with intelligent control. The display shows the temperature of the water heating, as well as various functions operation of the column: indication of the presence of a flame on the burner and the presence of water circulation in the heat exchanger, indication of the charge level of the batteries for ignition. If the charge level is insufficient for ignition, the battery icon will flash, indicating that it needs to be replaced.

Multi-level security system

The intelligent control system controls the operation of all sensors. If any malfunctions or errors occur in the operation of the column, an error code is displayed on the LCD display, which is very convenient when servicing and operating the device.

Operation at low gas pressure

Electrolux geysers are designed taking into account the peculiarities of work in Russia, Ukraine, Kazakhstan, Belarus and other countries of the post-Soviet space, where the pressure of gas and water in the mains is sometimes quite low. The minimum pressure for water to turn on is 0.15 bar, gas - 13 mbar.

The Electrolux GWH 265 ERN NanoPlus instantaneous water heater is an extremely easy-to-use gas water heater with electronic ignition. The burner ignites automatically when the hot water tap is turned on, then the heating power and water temperature are regulated using ergonomic knobs on the front control panel. The presence of flame is monitored by an ionization control unit. Gas-burner made of high quality stainless steel. The chimney diameter is 110 mm, which makes it possible to connect to almost any exhaust system.

The heat exchanger in NanoPlus geysers does not contain lead and tin, which indicates its safety for human health and the environment, as well as high reliability and durability.

The control panel of the GWH 265 ERN NanoPlus geyser has a modern digital LCD display with intelligent control. The display shows the water heating temperature, as well as various functions of the column: indication of the presence of a flame on the burner and the presence of water circulation in the heat exchanger, indication of the charge level of the batteries for ignition. If the charge level is insufficient for ignition, the battery icon will flash, indicating that it needs to be replaced.

Multi-level security system

The first level of the security system is a traction sensor. It is triggered when there is no draft in the chimney or reverse draft appears, turning off the gas supply. The second level of the security system is a thermostat that protects the column from overheating. The third level of safety is a hydraulic safety valve designed to control the circulation of water in the heat exchanger. This protects the geyser from overheating. The fourth level - flame ionization control controls the presence or absence of a flame on the burner. The intelligent control system controls the operation of all sensors. If any malfunctions or errors occur in the operation of the column, an error code is displayed on the LCD display, which is very convenient when servicing and operating the device.

Electrolux geysers are designed taking into account the peculiarities of operation in Russia, Ukraine, Kazakhstan, Belarus and other countries of the post-Soviet space, where the pressure of gas and water in the mains is sometimes quite low. The minimum pressure for water to turn on is 0.15 bar, gas - 13 mbar.

Advantages of the Electrolux GWH 265 ERN NanoPlus geyser:

Electronic ignition

LCD display with water heating temperature indication

Indication of heating temperature, presence of flame on the burner, water circulation, battery charge levels

Stainless steel burner

Oxygen-free copper heat exchanger

Adjusting temperature and heating power mode

Multi-level security system

Operation at low water and gas pressure

Low gas consumption

Low noise level

Universal chimney diameter

Buy with this product

400 rub.

180 rub.

150 rub.

Questions and answers

Hello. I live in a 5-story building. The water pressure is weak, then drops, then normal. The old pump (Neva) was smoking very heavily (I don’t know what exactly to call it), in general, all the walls turned yellow... We are planning to make repairs, change the finish and at the same time purchase a new pump. We chose the Innovita Primo 11 i NG. Will she fit? How often should batteries be changed? We also considered Electrolux speakers (For example, electrolux gwh 10 nanoplus 2.0) Which in this case better?

It costs Neva semi-automatic. It works, but what a pain to set it on fire. I want to buy an Electrolux GWH 10 automatic machine. But I don’t know if the chimney diameter is suitable. Isn’t it possible for a master to come and see if it’s suitable or not? I'm not an expert, how can I find out?

Vyacheslav

Good afternoon. Dispenser Neva 4510, exhaust pipe diameter 120 mm, I want to exchange it for Ladogaz 11PL. with a diameter of 110 mm. Is it necessary to install a seal made of asbestos cord or can an exhaust steel pipe leave it like that.

Good afternoon!
Please tell me how much the TOTAL purchase of this speaker and dismantling will cost old Neva 4513, as well as installation and connection of this?
So that you can use it safely?

Also interested in how much safer and easier this dispenser is to maintain compared to Neva 4513?

I’m thinking, should I take this one or just install the same Neva 4513?

Thank you.

Hello,
Is the Hyundai H-GW1-AMBL-UI 306 water heater suitable for low water pressure and does not need to be connected to electricity?

Hello, please tell me a column with automatic ignition, for the home, for a long service life. Thank you.

Konstantin

Hello, I want to change the gas water heater baltgaz 5514 to baltgaz comfort 17, I would like to clarify the mounting locations are identical on these models? And comfort 17 is suitable if I have 3 hot water connection points? There are no problems with water pressure, but the 5514 cannot cope with heating water, only a small trickle. Will Comfort 17 solve this problem?

Hello!
Costs Vaillant column mag pro (mag oe 11-0/0 xzc+h), connected to the home gas pipeline, there are three points of consumption from it - the kitchen sink, the bathroom sink and the shower/bathroom faucet directly.
Pressure cold water the apartment is good. When at least one of the consumption points is turned on, when a minimum amount of cold water is added to the mixture, the temperature of the total flow drops sharply. That is, the column cannot provide the required pressure warm water. Is it really that low-power or are there problems with the connection (the previous owner of the apartment connected it)? If you still don’t have enough power, then which Neva/Baltgaz company do you recommend?

ANSWER: Good afternoon! Your column is not even designed for 2 consumption points. The only option for 3 points is BaltGaz Comfort 17.

Good afternoon I’m choosing between Ariston fast evo 11b and Electrolux GWH 11 nanopro 2.0, tell me which is more reliable? or can you recommend another?

ANSWER: Good afternoon! The most reliable at the moment - BaltGaz with a 5-year warranty

Please check the current country of manufacture of the Electrolux GWN 12 and 14 gas water heater

ANSWER: Good afternoon! The factory is located in China

What is hydroignition? I want to take a Bosch WRD 13-2G speaker. Am I right.

ANSWER: Good afternoon!
With this system, ignition occurs automatically when the water is turned on, without batteries. But such a system is not very reliable; we recommend purchasing a column with automatic ignition from batteries

What is the warranty period and which components are covered? and is it necessary to carry out regular maintenance to maintain the warranty?

ANSWER: Good afternoon!
The warranty on Electrolux speakers is 2 years from the date of installation. To extend the warranty for a second year, it is necessary to carry out maintenance one year after installation - this is a requirement for all geysers.

Hello! Electrolux 14 liter failed. Worked for 15 years. What column do you recommend as a replacement? Extra bells and whistles are not needed. I was choosing between Electrolux and Bosch. Maybe something else should be considered? Thank you

ANSWER: Good afternoon! Electrolux still remains good option. At Bosch Lately There are many complaints - immediately after the warranty period expires, the heat exchanger begins to leak. And as an alternative, you can consider Baltgaz/Neva - no one can compare with them in terms of warranty period

Good afternoon Who answers the questions? Manager or engineer? If it's a manager, there are no questions. If I'm an engineer, then I have 2 questions.
1) the passport for the gas column states “capacity 6 l/min”, what does this mean? That at any input pressure (volume of passing water) only 6 liters of water will pass through the water block or that the heating specified in the documentation, for example, by 50 degrees, will be provided only to this volume (if it increases, the heating of the water will be less at a constant combustion power, if it decreases - more heating)?
2) In the Neva Transit series of gas pumps (made in China), the minimum is indicated. water pressure for start-up 0.02 bar. It's not a mistake? Maybe MPa, not bars? Why is this value so low? For all manufacturers, this value is no less than 0.1-0.15 bar (=0.01-0.015 mPa=almost 0.1-0.15 atm).

ANSWER: Good afternoon!
1) This means that in a minute the column will release 6 liters of water, heated 25 degrees higher than cold water. If you want to heat water by 50 degrees, then the productivity will be 3 l/min.
2) Yes, an error. Minimum pressure 0.2 bar. Thank you for writing about this and fixing it.

Hello!
Please help me choose a RELIABLE gas water heater for the apartment, enough for 2 points of consumption, taking into account the low pressure in the water supply (2-2.5 atm in a system with the taps turned off).

ANSWER: Good afternoon! Our speakers are best suited: BaltGaz Comfort 13 or 15, or Neva 5514. If you are interested in imported ones, then Electrolux 14.

I've heard a lot about mora top speakers being the best. Is it so? and which one would you recommend if not the 13 liter mora?

ANSWER: Good afternoon! Mora speakers are really good, but they have problems with the availability of components and their cost. In this regard, we recommend Neva/BaltGaz and Electrolux gas water heaters, which have no problems with this and are reliable - they have a warranty of up to 5 years.

Konstantin

Hello! I have a great desire to buy a Neva 4508 gas water heater running on liquefied gas, so where can I buy it in Moscow?

ANSWER: Good afternoon! You can buy from us, for example))

Good afternoon. The gas water heater is AEG 11 ERN. It suddenly broke down - when you turned on the water tap, it stopped giving a spark to the burner (the battery was changed). Is there a possibility of repair? If not, which one should I replace with Bosch 10 - 2V or Bosch 13 -2V at the lowest cost (chimney, etc.)? Thank you.

ANSWER: Good afternoon! AEG speakers have not been sold in Russia for a long time. And you are unlikely to find spare parts for it.
We advise you to change not to Bosch, but to something more quality speaker- for example, Electrolux. In terms of displacement, I think 12 liters will suit you.

Alexey Anatolyevich Mikhailov

Good afternoon
I have an Electrolux GWH 265 ERN NanoPlus (5 years old). I suspect a malfunction of the water unit (water is oozing presumably from under the gaskets). Question: is it worth replacing the entire column? And if so, what is it worth? The same for another five years - somehow it doesn’t warm the soul. Does it make sense to consider Bosch W 10 KB or Electrolux GWH 10 NanoPlus 2.0 as an alternative? Will they be more reliable? The house has problems with water pressure (extremely low, even suites only work with the water flow tap turned up to the maximum and are regulated only by gas) and there are no problems with gas and draft.

ANSWER: Good afternoon! Most likely, replacing the unit will cost almost the same as a new column. Between Bosch and Electrolux, choose Electrolux. Bosch 10 KB performed poorly in contrast to Electrolux. The model you indicated is correct - Electrolux GWH 10 NanoPlus 2.0, it should work normally if the water pressure is poor.

Good evening. Please tell me what metal the heat exchanger for Electrolux geysers is made of?

ANSWER: Good evening! Electrolux, like many other manufacturers, has a copper heat exchanger

Vladimir Alekseevich

How do BaltGaz Comfort 13 - 15 dispensers differ from Neva 5514 structurally (heat exchanger, ignition, materials used, functionality, etc.)? Thank you.

ANSWER: Good afternoon! The Comfort series speakers have a digital display that shows the water temperature and battery charge level. Otherwise there are no differences

Do you have a Vaillant MAG gas water heater?
(it says that it is discontinued, but the price is worth it)

ANSWER: Good afternoon! The speakers are indeed discontinued, we no longer have any leftovers.

Hello.
We bought and connected a Bosch Therm 4000 O WR 13-2 G speaker. A day later we noticed that from inside the heat exchanger drips approximately once every 1-3 minutes hot water. Sometimes a hissing sound is heard, as if a drop of water is dripping onto a hot surface, possibly onto a burner. Water drips only when the column is running. When turned off, the water does not flow, although the column remains under water pressure (the tap is closed at the outlet).
Does this mean the heat exchanger is faulty? Is it necessary to do something in such a situation, or can it go away on its own with time?

ANSWER: Good afternoon! Most likely condensation is falling, there is nothing wrong with that.

What do you recommend to buy? Geyser...innovita 14i or Baltgaz comfort? Which is more reliable? Yuri

ANSWER: Good afternoon! We would recommend Baltgaz Comfort. They have a 5-year warranty, all components are Russian, good quality. It is also easier and cheaper to find components from Baltgaz in case of post-warranty repairs.

Hello, we decided on this product, the Bosch WR 13-2 B geyser with automatic ignition, but the question remained: “Is it possible to regulate the water temperature not on the column itself, but by opening an additional tap with cold water"Thanks in advance for your answer.

ANSWER: Good afternoon! This can be done, but it is not advisable - in this case the column will serve you less.

Who is the manufacturer

ANSWER: Hello, the country of origin of all Bosch speakers is Portugal.

how much does it cost to install a Bosch WRD 13-2 geyser?

ANSWER: Hello, usually installing a gas water heater costs 2,500 rubles. Materials are paid separately. It is better to check in detail with the manager or installer by calling the numbers on the website.

TAMARA Konstantinovna

Hello! Neva 3208 is hanging. I want to install Bosch WR13-2P. How much will a replacement cost? Thank you.

ANSWER: Hello, usually installing a gas water heater costs 2,500 rubles, dismantling an old one costs 350 rubles. Materials are paid separately. It is better to check in detail with the manager or installer by calling the numbers on the website.

Thank you, I received an answer to my question.
I have one more question. Is it possible to replace the Neva Lux 5013 water heater with a Bosch Therm 4000 O WR 13-2 B gas water heater and how much will it cost? Thank you.

ANSWER: Good afternoon! Of course you can. Dismantling an old column costs 350 rubles, installing a new one costs 2500.

the cost of a Neva Lux 5013 (5025) gas water heater, which water heater can be replaced with the least labor and material costs

ANSWER: Good afternoon! Consider 5514.

Mod gas water heater ElectroLux (Electrolux)GWH 265ERNNanoPlus is made in a classic snow-white case and has a number of unique advantages, including the function of advanced intelligent device control, as well as the ability to perform productive operation even at low water and gas pressures. This model is equipped with a multi-level security system.

Features and advantages of Electrolux gas instantaneous water heaters of the presented series:

Electronic burner ignition
LCD display that displays the water heating temperature, battery charge status, indication of the presence of a flame on the burner, water flow indication
Stainless steel burner
Heat exchanger made of oxygen-free copper, created using OXYGEN FREE technology: does not contain lead, is safe for health
Adjusting temperature and heating power mode
Multi-level security system
Operation at low water and gas pressure
Minimum water pressure: 0.15 bar
Low gas consumption
Quiet operation
Chimney diameter: 110 mm
Capacity: 5-10 l/min
Power: 17.6 kW

Gas water heaters flow type Electrolux are devices equipped with a multi-level protective system. The manufacturing company took special care of the safety of users, which had the most favorable effect on the service life of these devices. It is worth noting that equipment from the Electrolux brand enjoys the constant love of customers. The company has established itself as a manufacturer of first-class home equipment and continues to maintain this status.

A good modern and inexpensive speaker. It is better to use alkaline batteries. They last much longer.Flaws

Leaked after a year of use.A comment

If you installed the column yourself. then you can forget about the warranty, and if the heat exchanger leaks, the cost of repairs will be comparable to the cost of a new column.
As soon as our column began to leak, we began to look for documents about the purchase of the column in Citylink, but we could not find them, and they are necessary for warranty repairs. It’s good that in Citylink you can make copies of purchase documents only by order number. The order number can be found in personal account on the website or via SMS on your phone.
The column was installed by a master from Gorgaz, so there was an act on the installation of the column with seals. Also in Citylink they put a stamp in the column’s passport (where the store’s mark should be).
Next we called the Simona-service company, which is located in Nizhny Novgorod. They confirmed that if the case is under warranty and there are installation documents, then they will be able to come and repair the speaker at home (I live in the city of Zavolzhye, Nizhny Novgorod region).
A few days later the master arrived and confirmed that the case was under warranty and they ordered us a new heat exchanger (as they said, a more reinforced one). After 1.5 weeks they called, a technician arrived in the evening and replaced the heat exchanger with a new one.

Once again I was convinced that Citylink is a serious company that cares about its customers. For the last 5 years, I have been buying all household and computer equipment only from Citylink. There have never been any problems with warranty repairs.

0 0

price, dimensions, ease of installation and operation. accuracy of the temperature sensor!Flaws

A comment

I've been using a Chinese vector water heater for 10 years, it's time to change it - I took one-on-one electrolux giblets, changed the design a little and saved on the casing...
slows down when starting, works only when the water supply tap is fully open, does not light up with low pressure...
I would like more from this company...
vector and oasis are 2 thousand rubles cheaper...and performance and efficiency are higher.

Complain Was the review helpful? 9 6

Convenient controls, easy to install, heats perfectly.Flaws

Sometimes it doesn't light up.A comment

It’s not possible to regulate the temperature at my neighbor’s place, but here everything is simple.

Gas water heaters GWH 265 ERN Nano Plus from the Swedish concern Electrolux are the most reliable, productive and safe equipment in their class. But low quality water, sudden voltage surges in the absence of a stabilizer, user errors are the reason for repairing the water heater using original spare parts.

Advantages of original spare parts

Spare parts, parts and components for the geyser series GWH 265 ERN NanoPlus are in high demand, as the equipment is actively used in apartments and private houses. If it is necessary to repair an instantaneous water heater, technicians recommend buying only original spare parts/parts, which have a lot of advantages over analog products:

Dimensional accuracy of spare parts, as well as pipes, washers, connectors and other mounting elements;
Full compatibility - when upgrading a speaker, the manufacturer adapts every detail that perfectly performs its function;
Safety - no gas or water leaks with the risk of household methane explosion;
Availability - the cost of the original spare part is slightly higher than the price of an analogue. But the result is significant savings, since the part/spare part will definitely fit in size and will last several times longer.

In the event of the slightest malfunction or the need for scheduled maintenance of the GWH 265 ERN NanoPlus dispenser, it is important to purchase original spare parts or certified analogues listed in the manufacturer’s catalogue.

From fasteners to heat exchanger - all original spare parts for repair and maintenance of the column

In our company’s catalog you can quickly select and buy all the spare parts that are needed for repairs and Maintenance geysers GWH 265 ERN NanoPlus from Electrolux. Regardless of the condition of the equipment and the complexity of the breakdown, you can buy spare parts that are ideal for your equipment:

Gas-water blocks and water system;
Ignition blocks and electrodes, igniters and pipes for them;
Pressure switches, microswitches;
Thermocouples, temperature limiters, sensors and controllers;
Solenoid, gas valves;
Membranes, water block covers, housing elements;
Control panels/boards, protective automation;
Consumables, fasteners, repair kits, etc.

Experienced engineers of our company will help you select the necessary spare part, place an order, or fill out an individual request for delivery of a rare/unavailable item. Each client will appreciate the benefits of cooperation, as we:

We offer affordable prices to retail customers;
We provide fast delivery and certified repair of GWH 265 ERN NanoPlus speakers;
We have developed special terms of cooperation for corporate and wholesale customers.