home Metal

How to fix an old chair with a backrest. We carry out restoration of old chairs with our own hands - master class and step-by-step photos. Repairing a wooden chair: the most common breakdowns

« How to repair a chair?“- a rather difficult question, given the variety of furniture that exists today. Moreover, even classic version The wooden chair is presented in several types, the difference of which lies in the method of assembly. Accordingly, such chairs will have to be repaired different ways.You can repair an office or computer chair at home, which we will discuss in more detail in the section below. It will also not be a problem to restore a stool or chair made of wood. However, you most likely will not be able to repair furniture made of metal, molded plastic, glass and other materials yourself. In this case, you should either contact a specialist or purchase a new chair.

We restore an office or computer chair

An office or computer chair is a large chair made of metal and plastic, upholstered in soft fabric. The convenience of such furniture lies in the fact that the design of the chair allows you to change the height of the seat, the position of the backrest, and the chair also has the ability to move freely on the floor due to a system of wheels.

When purchasing such furniture, much attention should be paid to the design with wheels, as well as the seat height adjustment system.

It is in these places that a computer chair breaks most often.

The following are the most common breakdowns of office chairs:
the lever that is responsible for raising and lowering the seat does not respond to pressure, which is a consequence of a broken air valve;
the seat is not adjustable and is not fixed at the required height, which is also a consequence of a gas lift failure;
if the back of the chair is not installed in the specified position, then the reason lies in a broken fastener; one of the most common problems
– this is a breakdown of the cross or the wheels falling out;

When used, the chair creaks or makes other unnatural sounds. In most cases, if the problem is not severe, you can fix a computer chair at home yourself.

To fix the problems associated with the gas lift, the chair will have to be disassembled, or rather, its upper part with the seat and back will have to be removed. Next, you should experimentally find out why the lift lever does not work and whether this can be somehow corrected. If the release lever is bent and does not reach the button that is responsible for adjusting the chair, you can try to straighten the structural element.

You can use a hammer or pliers for this purpose.

If the valve inside the gas lift is not sealed, it may cause the seat to lower every time the chair is used. You won’t be able to fix such a breakdown yourself, and professional craftsmen most often recommend purchasing a new gas lift and installing it on a computer chair or office chair. As for the crosspiece and wheels, then in in this case It also won't do without replacing parts. If the wheel just falls out, it may be enough to replace the fasteners. The situation is the same with repairing the backrest.

Sometimes just tightening the adjuster tight is enough, but if it's broken, the part will have to be replaced.

You can try lubricating a squeaky chair. To do this, you need to disassemble the chair and get to the gas lift. The bearings are lubricated with special oil. If the back squeaks, just tighten it.

Repairing a computer or office chair at home is really problematic. You definitely won’t be able to deal with a serious breakdown on your own. But you can try to eliminate minor shortcomings.

You can learn more about how to fix a broken shock absorber and secure the seat of a computer chair by watching the video below.

Repairing a wooden chair with your own hands Repairing a wooden chair at home with your own hands, although difficult, is possible.

To do this, you don’t have to be a carpenter; it’s enough to have clear instructions in front of your eyes.

First of all, you need to figure out which breakdowns occur most often.
Replacement of the main elements of the chair. If you use wooden furniture incorrectly, it can be easily damaged. Fortunately, replacing a leg or back part of a wooden chair is much easier than replacing an element of an iron or plastic structure. You can order a damaged part from a carpentry shop, and then install it yourself.
The chair creaks or wobbles. In this case, you should pay attention to the joints; it may be necessary to disassemble the chair and re-glue its parts.

Each situation should be examined in more detail. Also in the section below we will tell you how to restore old chair and change the seat upholstery. There is no need to throw away quality furniture if some minor part is broken.

Repairing legs

Chair legs - main Basic structure this type of furniture. If one of the legs is damaged or, worse, broken in half, it is not possible to repair the chair at home.

However, this is a common misconception.

It is possible to fix a broken leg. To do this, you just need to glue the wood correctly. If the fault is smooth, then this will definitely not be difficult. To repair, you must follow the following sequence of actions: The first step is to wash and degrease the surface that we will glue.
Choose a comfortable place to work where you can place your chair so that it does not wobble.
Choose a suitable glue for wood, apply the substance to the break and connect the two parts of the broken leg. Now you need to secure the tree motionless for several hours. The time depends on what glue you choose. In some cases, these actions may already be enough to fix a broken leg. However, if you are not sure of the quality of the wood, then it is better to carry out additional work.
To do this, place the chair with the glued leg in a comfortable position, then use a router to make a not too deep groove in the middle of the leg (about 10 millimeters).
Now you need to cut out an insert of suitable size from wood, which will serve as a fastening element for the broken chair leg. Insert the resulting part into the groove that we cut earlier. If the insert stands out too much, you need to cut off part of the element. After making sure that the insert fits snugly into the chair leg, lubricate the groove and wooden element glue generously, then connect the parts.
If possible, secure the parts tightly in some way so that the wood sticks together well and efficiently. Subsequently, such a chair will definitely not break at the gluing site. As an additional measure, you can glue two inserts on opposite sides.
Subsequently, all that remains is to paint over the insert with a pigment that matches the color of the chair.

A few days after repair, the chair can be used. Don't worry if the work doesn't work out at one stage. It happens that it is difficult to glue a fracture the first time. Just repeat the procedure and wait until the wood sticks well and reliably.

Many people also often ask what is the best glue to use to glue a wooden chair leg. It is best to use a specialized product. The glue must be waterproof and not leave streaks on the wood. Many people prefer PVA glue, as well as carpentry and synthetic pastes. Before purchasing a product, be sure to familiarize yourself with the composition of the glue, or better yet, check with a consultant whether the selected paste can be used for wood.

The back is loose

If the back of the chair is loose, then it is necessary to renew the gluing of the grooves. Under no circumstances should you neglect the problem, because in this case there is a possibility that the backrest elements will simply fall off and more labor-intensive work will have to be done.

To easily update the gluing, use the suggestions below. step-by-step master class with photo.

The first step is to carefully disassemble the back of the chair by unscrewing the screws from the wooden inserts as shown in the photo.
Afterwards, you need to carefully knock out the inserts from the main structure of the backrest using a special carpenter's hammer made of rubber or dense wood.
Now you need to generously lubricate the insert with the selected glue. Try to coat with paste not only the insert, but also the area near it, which connects to the main structure of the backrest.
Cut a piece of gauze and lay out the fabric as shown in the photo. Gauze will strengthen the glue. Carefully insert the wooden element into the groove.
Next, you need to clamp the back of the chair in a vice so that the excess glue comes out of the groove. Don't forget to use wooden spacers so that the metal vice does not damage the surface of the chair. Remove excess paste with a knife or other sharp object.
Use a damp cloth to wipe off any remaining glue on the wooden back of the chair.
As additional reinforcement, you can use metal corners, which will extend the life of the wooden chair. To do this, you need to make holes for the screws.
Next, you need to carefully attach the corners and tighten the screws with a drill. After this procedure, the chair will not only stop creaking, but will also become more stable.

Depending on the glue you choose, you will need to leave the chair for a while so that the backrest elements stick together well.

After this, the furniture can be used again. You can glue the broken elements of the back by analogy with a broken leg, the repair of which is described above.

Changing the seat and upholstery The most difficult thing to repair is the seat of a wooden chair, or rather its main structure. In this case, the chair must be completely disassembled and reassembled.

In this case, all the same tools and materials will be used: drill, glue, tension, gauze, screws and metal corners.

Some chairs, such as the Viennese chair, have an arched seat, which makes repairing it much more difficult. However, if you disassemble the structure correctly, no problems should arise. In the case of gluing the seat, we will need several vices, which will need to be installed on the structure for high-quality gluing.

Don’t forget to additionally strengthen the gluing of the frame so that you don’t have to do the work again later. If the chair has a soft seat and upholstery, sooner or later the fabric will have to be changed.

The reason for this may be damage to the material or contamination that could not be washed off. For upholstery, it is recommended to use the following types of fabric:
Although cotton fabric does not look bright and catchy, such material is durable and wear-resistant, so upholstery made from it will last a long time;
linen upholstery is slightly less wear-resistant than cotton, but is also suitable for frequent use in everyday life, and a chair with such upholstery looks antique;
vinyl upholstery is not afraid of moisture, it is very easy to wash such fabric from any kind of dirt, but this material is not suitable for hot climates;
tapestry is an expensive fabric, but it is very durable and ideal for upholstering chairs; besides, such furniture subsequently looks very unusual and eye-catching; often the seats of chairs are upholstered with velvet, as it is durable and soft fabric

, however, it is very difficult to clean serious contaminants from such material..

Choose the upholstery material that best matches the interior of the room in which the chair is most often placed.

Over time, the wood from which the chair is made may dry out, which will lead to a loss of strength of the furniture. What should be done to avoid this or fix the problem that has already appeared?

First of all, I would like to note that wooden furniture Whether it's a chair or a cabinet, it needs careful care. This material does not tolerate sudden changes in temperature, as well as high or, conversely, too low humidity.

As preventative measure The varnish of a wooden chair needs to be renewed, which will significantly reduce the chances that the wood will dry out. IN construction stores You can purchase a special varnish, as well as paint with an additional protective layer.

If the problem has already appeared, then only wooden inserts will help, which will hide the cracks that have formed and strengthen the structure of the chair. They are performed using the same method as described in the section on fixing a broken chair leg.

If the cracks are small, you can use special wax or wood putty, retouching construction pencils will also help. After treating with the chosen product, the surface of the chair must be painted and varnished.

Having studied the information provided, you now know how you can repair a wooden chair or office chair on wheels yourself at home.

Takes ~2 minutes to read

Save

If you have old chairs in your home, there is no need to throw them away. They can still serve you for several years if they are properly restored. You can do this yourself. This way you will save your money and have an interesting time.

In this article we will tell you how to restore old chairs with your own hands, and also consider ideas for upholstering them.

How to restore an old chair

Required tools:

Scissors.
Paint brushes.
Polishing machine. If you don’t have one, then you can get by with simple sandpaper.
Putty knife.
Electric drill and drill bit.
Face mask.
Copy paper.
Power saw.
Paper.
Pencil.

Save

Restoration stages:

First you need to get rid of those parts of the stool that cannot be restored. For example, use a jigsaw to remove slats and loose parts on the backrest.
Now places a thick sheet of plywood on the seat. Using a pencil, we mark the intersection with the vertices of the back, since the sheet can be very large. Using carbon paper, transfer the pattern onto the workpiece. To easily cut out patterns, drill holes in the plywood.
A sheet of plywood must be secured between boards or on a workbench. Using a power saw, make the shape of the back of the stool. Place the finished part in place. Using a pencil, mark the places where the screws should be placed to hold the wooden planks and plywood. Using a drill, make holes narrower than the screws themselves. Insert the screws and seal the holes with putty.
Give it time to dry. After which everything needs to be leveled. Sandpaper is used for this.
If you need to paint a chair, you first need to apply a layer of acrylic primer to the surface. Wait until it dries. When processing, special attention must be paid to the back of the product, since all edges and lines must be processed carefully. Now you can paint. After the paint has dried, the chair is varnished.

Seat trim

There are times when restoration of the stool seat is necessary. To do this you will need the following materials and tools:

Stapler for furniture.
Staples.
Screwdriver.
Foam rubber 5 cm thick or 2 pieces of fabric 2–3 cm thick.
Thick fabric for seat upholstery and backing fabric.

Save

So, how to reupholster the seat of a wooden stool:

We take out the seat and upholstery. We don't throw away the base.
Turn the chair over and remove the fastenings that hold the seat in place.
We remove the factory brackets and take out the frame with the spring. There will be filler on it, or rather, the remains of it. We remove all this.
Cut out a rectangle. The upholstery should extend beyond the edges of the seat by 6–8 cm.
We place a backing made of thick fabric on the springs. It needs to be fixed with a stapler to a wooden frame.
We put in the filler. Acceptable thickness is 4–5 cm.
Making upholstery for a chair. It is best to perform this action together. For upholstery, linen, leather or textile materials are used.

DIY restoration of old chairs

The process of restoring an old lacquered stool is slightly different. First of all you need to prepare:

Acetone.
A sponge.
A brush.

To restore a wooden stool, it is necessary to remove the old covering. To do this, treat the surface with acetone. Thereby removing the old coating in the form of varnish.

Using a brush, coat the stool with new varnish. Leave it for a while. After this, you can use the chair again.

Some tips (master class):

To seal small cracks, you can use homemade putty. To make putty you need to take flour and PVA glue. The mixture should be very thick and resemble plasticine.
To freshen up a wooden stool, you can use stain. It has different shades. Be sure to seal the stain with varnish. Otherwise, you won't wash your clothes.

How to decorate an old chair in an original way - master class

Save

At home, you can paint the stool however you like. If you choose the right design for a chair, it can complement the interior of your home. For example, choose two colors for painting, the first is turquoise, the second is white. Now let's move on to the back. It needs to be treated with fine-grained plaster. A “worn” effect will appear. Choose the upholstery material so that it matches the color of the product.

If you want to make a vintage stool, then choose cream, blue, pink paint. Then paint on the chair. You can paint the entire stool or individual parts. Now you need to apply the gold paint. Small cracks in this case will be in order. They will create an antique effect.

If you need to make a chair in the Empire style, then choose a milky color for the upholstery fabric. Floral prints are also allowed on it. The frame is coated with gold paint.

If you don’t want to bother with paint, you can sew a cover. It will completely cover all the shortcomings of the old stool.

You can replace the regular upholstery with leather straps. Take about 30 leather belts different colors and intertwine them with each other. You need to intertwine according to the “basket” principle, and then fix it from below with self-tapping screws.

Restoration: patchwork technique

Save

Each of us has a whole package of unnecessary things that we definitely won’t wear again. This is the kind of material that will be useful for creating a stool design in a patchwork style. You need to decide on the range and choose suitable materials from things.

It is worth noting that there is no need to use elastic materials. Choose simple things without complex patterns. Use old upholstery as a template.

If you are restoring chairs for the first time, then you need to choose square or rectangular elements for upholstery.

Cut the required number of flaps and distribute them over the surface of the seat. The flaps may vary in width. This will create a “mosaic” effect. Sew a ribbon from pieces of fabric. To do this, you can use a machine or do everything by hand. Collect the resulting strips into a single canvas. Try the template on the seat. Cut off any excess. Secure the upholstery.

Decoupage technique for the design of an old chair

This technique will help turn monotonous stools into original and beautiful objects that will decorate the main interior of the house. To create a design you will need napkins, fabric with a pattern, you can use leather appliqués. If you can get to the store, you can buy special cards for such equipment.

Save

After you sand the chair, you need to seal all the cracks with putty and cover everything with water-based putty. Cut out the picture, apply glue and attach the drawing. Gradually you need to move from the center to the edges , thereby smoothing out the pattern. Let the surface dry and then varnish it.

Restoring an old chair with your own hands is not that difficult. The main thing is to do everything step by step. An old product can look like new if you pay attention to its design. You can paint it, make different upholstery, sew covers, or use different design techniques. Then the chair will not only perform its functions, but will also become an addition to the interior of the room.

Don't rush to throw away old things. They can be useful for restoring an old stool. We have reviewed different variants for stool designs that anyone can make.

Video: how to restore a wooden chair at home

In almost every home you can find several old chairs, appearance which leaves much to be desired. Don't rush to throw them away. Restoration will help breathe a second life into an old but beloved piece of furniture.

Restoration gives the chair a second life and creates unique furniture.

With just a little effort, old chairs or armchairs will turn into real works of art and will delight their owners for many years.

Give a second life

Restoring chairs with your own hands is not so much a complicated process as it is a painstaking one.

Before you begin, you must carefully inspect the product. Based on the results of the inspection, it will become clear what to do: simply reupholster the chair seat, update the paintwork, or carry out more serious repairs.

If the chair is loose, then the reason should be sought in the tenon joints. Over time, the wood dries out and the connecting elements begin to dangle in their sockets. To eliminate this and strengthen the structure, you need to increase the size of the tenon, compact the drawers and replace the power jumpers.

Restoration will require less effort paint coating. old paint you will have to remove, sand the surface of the parts and cover them with paint or varnish. To perform the work efficiently, the chair must be disassembled: remove the seat, unscrew the back and legs. If the design of the product is complex and has many small parts, then during disassembly a diagram of the location of each part should be drawn up. This will make it easier to assemble the chair after the restoration is completed.

The easiest way to update an old chair is to replace the upholstery. Replacing old and worn fabric can change the appearance of furniture beyond recognition. If necessary, it can be performed in one way or include all of the listed types of work.

Return to contents

Preparing for recovery

Before you begin, you need to prepare tools and materials. If the chair needs serious repairs, then you will need:

Before restoration, the old chair must be disassembled.

Screwdriver.
Screwdrivers.
Hammer.
Mallet.
Clamps.
Metal clamps.
Sandpaper of various grain sizes.
Construction stapler and staples.
Acrylic paint and brushes.
Scissors, pencil or felt-tip pen, cardboard, tailor's tape measure.
Foam rubber.
Thick fabric for upholstery.
Bucket, rag and dishwashing liquid.

The first step towards restoring the stool is to clean it of dust and dirt. To wash it well you will need warm water, soft cloth and some dishwashing liquid. This solution will help to quickly clean the chair not only of dirt, but also of some of the old varnish. The washing procedure must be carried out promptly so that the wood does not come into contact with water for long, and then everything must be thoroughly dried.

The next stage of restoration is dismantling. First you need to remove the back and rear legs. The main thing here is to adhere to the rule: assembling the chair should be done in the reverse order. This is the only way all the holes will coincide with each other. In addition, all parts and fasteners must be marked. This will also make assembly easier.

Tools for restoring chairs: batting, upholstery fabric, stapler, staples, mounting adhesive foam, cardboard, screwdriver, scissors.

If the heads of the screws that hold the parts together are hidden in the sockets and they are covered with wooden plugs, then you can remove them using a chisel. If this does not work, then you need to use a drill whose diameter is equal to the diameter of the plug and drill it out. The opened screw is turned out with a screwdriver. A drop of industrial oil applied to the screw will make the job easier.

If the chair has been secured using epoxy resin, then it will help to remove it hot water. Wet a rag or napkin and place it on the gluing area. Repeat the procedure until the glue completely softens. Then you need to scrape it off with a knife and dry the parts. Hot steam will help soften the glue in tight joints. To do this, a rubber hose is placed on the spout of the kettle, and a stream of steam is directed to the connection.

Return to contents

Processing and assembly of parts

To properly restore a chair, it must be carefully inspected. All parts must be sanded. Glue and tighten any large cracks found using clamps. Glue smaller ones and secure with paper tape. Excess holes and chips on parts should be filled with a slurry of glue and small sawdust. You can continue work only after the glue has completely dried.

To make it easier to work with sandpaper, you need to cut it into narrow strips and stick them on wooden blocks 20-40 mm wide and 300-350 mm long. Paper should be used in different grain sizes. The surface after treatment should be flat and smooth. A grinding machine will help make the job easier and significantly reduce processing time.

Be sure to check all connections. If the legs of a chair are inserted directly into the seat and over time they begin to sit loosely in their sockets, then to strengthen it it is enough to wedge them. A cut is made at the ends of the upper narrowed parts of the legs and a wedge is driven into it. Thanks to this technique, the diameter of the end will become larger and it will fit more tightly into the socket, which must first be coated with glue.

It will be more difficult to restore chairs with crossbars between the legs and drawers under the seat. In such structures, a tongue-and-groove connection and sizing are used to fasten parts. When the seam weakens, you need to drill a hole with a small diameter from the inside and drop a few drops of glue into it with a syringe. When a tenon is weakened, it must be strengthened with thin wedges. Matches or wood chips dipped in glue are suitable for this purpose. They need to be hammered into the nest together with the thorn.

If the chair is very loose, then in addition to gluing the joints, you need to strengthen the structure with wooden blocks. They should be attached with screws to the drawers that are used to connect internal corners frame. The bars and drawers must be perfectly adjusted to each other. Even the smallest gap between them will cause the entire structure to skew.

Now you can start assembling the chair frame. All parts must be installed in place. In order for the glue to set, it is necessary to provide sufficient pressure. Tighten the glued elements using clamps or cords. A bucket of water can be placed on the seat. This will provide the necessary pressure. With such a load, the chair must stand for at least 24 hours. Excess glue should be removed immediately with a wet cloth.

Surely at home each of us has one old one, or even a couple of good solid ones. wooden chairs, which, however, . And everything would be fine, but their appearance leaves much to be desired. It seems that something with history is practically an heirloom, so it would be a shame to throw it away. But why throw it away if there is a DIY restoration of chairs? It is absolutely not necessary to contact a master who can do this for you. After all, firstly, you still need to try hard to find such a master. And, secondly, in this old item you can realize your new ideas and design fantasies. Try your hand, and we will show you how to upholster a chair with your own hands and make it the highlight of your interior!

Where to begin?

First of all, it is necessary to realistically assess the amount of work to be done. Remember that any chair, no matter what condition it is in. You can always replace worn out and broken parts with new ones. After an objective look, you need to think about the end result. That is, what would you like to get from this chair in the end. Think carefully about the room in which it will be located. And build on this further. The interior in which the updated chair will be located will become the starting point for the restoration of this piece of furniture at home.

Coloring

Whatever repair you undertake, painting or varnishing the surface of the chair is a must. To give this piece of furniture an updated look, you should get rid of the old coating. Therefore, you will need to use sandpaper. With its help you can easily remove cracked paint or varnish. But first you need to remove the seat and upholstery. For these purposes, use a hammer and, if necessary, a screwdriver. Some chairs have a seat that is secured with nails, so you will need a nail puller to remove them. Upon completion of this stage, you can safely sand the legs, back and frame with sandpaper. If you decide to renovate furniture at home, be prepared to do a good job of sanding. Perhaps this is the most tedious stage in the restoration of wooden coverings. Wood can be painted with several layers of varnish or paint, so at first it is better to work with coarse sandpaper. Sanding is carried out with fine-grained sandpaper.

Now you can go directly. It is known that wood absorbs any liquid very well. Therefore, our repairs will not be complete without a primer. This will allow the paint to spread more evenly over the surface and last much longer. The primer can be white or colorless. The first one is better to use if you are going to paint a chair. A colorless primer will be needed for those who will continue to use varnish and do not want to cover the wood texture. After applying one or more layers of primer, you need to wait for it to dry completely. Now all that remains is to go over it again with fine-grained sandpaper and start applying paint or varnish. But if you want to give the product an even more polished look, use a special wax balm. It is applied after the primer has dried before applying paint. It should dry well, after which it will need to be carefully polished with a brush. Now you can paint. In order for the product to remain in its original form longer, it is best to apply two layers of dye, first allowing each to dry thoroughly.

You can realize your design ideas

Sometimes an interior design does not include the use of soft seats. Therefore, chair repair ends with painting the seat and screwing it to the frame. If you want to completely repair the chair using new upholstery, proceed to the next step.

Upholstery replacement

It is important that the upholstery, the chair itself and the interior do not differ from one another. design solution. Therefore, you need to think through everything in advance to the last detail. Use only thick upholstery fabric, even if you are not only repairing an upholstered seat, but also making a chair cushion.

Remove all staples from the old seat. This is easy to do with large tweezers. Now let's start replacing the batting. The pre-cut piece needs to be placed on hot-melt adhesive and allowed to adhere well. If this is the first furniture renovation in your life, we recommend using plain fabric. (and even more so in stripes) you will have to constantly check how evenly it is located. But for a beginner this can be quite complicated and troublesome.

Be sure to leave a five-centimeter margin of fabric along each edge. Maybe even a little more. Pin the fabric to the surface to control the placement of the design. Gradually tighten the upholstery, securing it with a construction stapler at a distance of no more than 1–2 centimeters. Depending on the shape, the fabric at the corners can be fixed as follows:

Now all that remains is to return the seat to its place and enjoy the work done!

As you can see how it may seem at first. The main thing in work is to take your time and show maximum attention to detail! Be sure to share your tips for renovating furniture at home!

Our company restores chairs in Moscow even from the most deplorable condition at the most affordable cost. If you use a set of the same style, it will be better to repair the old one than to buy a new chair that does not match the others. Chairs have firmly entered into everyday life as universal furniture.

Types of damage typical for a chair

A chair is an integral element of furniture in almost all rooms in the house and few people pay attention to its condition until serious damage occurs. Owners, as a rule, think about restoring chairs when the fastenings of the seat springs come off. The tenon connection of the legs with the drawers also diverges gradually, and it is impossible to notice this simply while sitting on a chair. Therefore, pay attention to the condition of your chairs, especially when children like to fidget or sway on their legs.

This is what concerns serious damage to wooden parts, but do not forget that the upholstery of the seat and backrest suffers no less. They get scuffed, torn, drinks spill on them, and the like. You can really fight the latter yourself, but to do this you will have to completely remove the upholstery fabric to wash, dry it and then put it back.

If you have been using your set for more than 5 years, then restoration of the chairs is necessary. At the very least, in order to update the upholstery fabric. Along the way, inspecting the chair in the workshop will allow you to identify hidden defects and correct them in advance. You should not wait for the moment when the chair falls apart under you or bring its appearance to the point where it is destined for the landfill.

Restoration of a chair - photo:

Restoration of wooden chairs

Wooden chairs contain several important details for their condition, which are addressed by the restorer. The main load falls on the rim and seat. They wear out a lot from constant use, and the seat can even crack if you don’t calculate the load. The seats are made of plywood, because... it has elastic properties. If the manufacturer saved on the thickness of the plywood, then only by restoring the chairs can such a defect be corrected.

Another nuance when using old products is that their glue is natural based. Such compositions are sensitive to changes in temperature and humidity and lose strength over time. When we restore old furniture, then we use acrylic compounds and furniture grades of PVA glue. They have proven themselves well in the repair of chairs because:

✔ withstand increased load;
✔ non-toxic;
✔ remain flexible even in dry climates.

Restoration of old chairs

A large number of requests for services come from owners of such rare furniture as a Viennese chair. These vintage pieces appeared in the second half of the 19th century and were extremely popular until the early forties. The characteristic complex design of the backrest made of bent beech rods and slats gives the chair the elegance characteristic of wicker and forged products. At the same time, the back, legs and legs are incredibly durable and can withstand high loads.

However, there are weaknesses in Viennese chairs. The parts are assembled at tenon joints, held together with glue and this glue dries out over time. During restoration Viennese chair loose connections are disassembled, cleaned of glue residues and reassembled. Larger-scale work is possible, including the production of new parts identical to the original ones based on photographs.

Restoration of a chair from kitchen set- photo:

What is the basis for repairing chairs?

The repair tasks are close to those involved in restoration, but they have certain differences. In the process of repairing chairs, first of all, their functionality is restored. It is necessary that the chair stands firmly on its legs again, and that you can lean on the back. For such work, you need an understanding of design, the properties of wood, and the rules for assembling the product. Only workshop employees have such knowledge and skills.

Qualified assistance in repairing chairs - only with us!

Our workshop will provide you with qualified assistance in repair and restoration of any furniture. Many years of experience and thorough knowledge of carpentry help us cope with furniture repairs of any complexity. Restoring chairs of any design is no problem for us.

Our workshop services include:

✔ replacement of padding and reupholstery of chairs with new fabric;
✔ gluing parts of the back, seat and legs;
✔ complete replacement of damaged parts with new ones;
✔ elimination of chips, scratches and cracks;
✔ updating the varnish coating and painting.

Any type of repair can be carried out based on your realistic budget. Prices for work and necessary materials for the restoration of chairs are pre-agreed with the customer when drawing up an estimate. At the same time, we respect the client’s requirements for the quality of the finished order and short deadlines. You can see all the basic information about the workshop’s services on our website and contact us by contact numbers or e-mail. We are waiting for your calls.