home steps

Do-it-yourself drip irrigation from plastic bottles: photos and videos. How to make a drip irrigation system from plastic bottles with your own hands: list of materials and manufacturing methods, video tutorial Do-it-yourself watering from plastic bottles

What is drip irrigation. This is a dosed method of watering, which is carried out directly under the root of the plant. Thanks to this irrigation, the root system receives the required amount of moisture. To create such structures, a minimum of effort is required, little water consumption, as well as low material costs. If you wish, you can make drip irrigation from plastic bottles with your own hands. This is an excellent alternative to more expensive systems. Everything is made very quickly and simply. It is enough to have the required quantity in stock consumables and only a few hours of free time.

Advantages of drip irrigation from plastic bottles

Saves water by 2-3 times compared to other irrigation methods.
Targeted irrigation supplies moisture only to vegetable, fruit or ornamental crops– weeds remain without feeding.
Autonomy. You can leave tender, freshly planted pepper or tomato seedlings unattended for a week without them drying out.
The soil does not harden or crust over, as with heavy watering.
Drops do not fall on the leaves. The problem of plant burns in hot weather and fungal diseases or rot with regular evening watering is eliminated.
Water does not flow into puddles and does not fall on the paths between the beds.

What plants can be irrigated using drip irrigation from plastic bottles

Today, summer residents use a drip irrigation system in gardens and orchards, in greenhouses and on open beds. + This method provides water directly to the roots of the plant throughout the growing season. With its help you can irrigate all vegetable and berry crops:

Cucumbers;
Potato;
Tomatoes;
Raspberries;
Strawberries;
Grapes, etc.

What is needed for drip irrigation from plastic bottles

To make your own drip irrigation from bottles, you will need:

Knife for cutting containers. You can use scissors.
Sewing needle for punctures. But it is better to use nails or an awl.
Plastic bottles. For the manufacture of drip irrigation Containers with a volume of 1 to 2 liters are suitable. If the system is installed under bushes or young trees, then you can use 5-liter bottles.
Nylon tights. If necessary, they can be replaced with cotton material.
Empty ballpoint pen refill.

Suspended drip irrigation method from plastic bottles

This watering option is more suitable for low growing plants, such as cucumbers, for example, or greens (parsley, basil, lettuce). In order to implement such a system, you will need a base or frame made of wood or metal. The frame for bottles is made in the form of the letter “P” or “G” and is placed above the ground level at a height of no more than 50 cm, otherwise the drops will simply hit the ground, creating depressions and splashing heavily on the sides.

Bottles are selected in accordance with this parameter (their length should not exceed 40 cm). The number of containers depends on the number of plants that need drip irrigation - one bottle is located above each bush. It is best to hang a container of water so that the drops do not fall on the plant itself, but fall between neighboring bushes. This will avoid sunburn and various infections due to wetting of the green mass.

Holes are made in each lid, the size and number of which depend on the required intensity of watering - the more holes, the faster water will flow out of the bottle. Now you can cut off the bottom of the bottles and make holes near the cut edges. Through these holes the bottle will be attached to the frame with wire or rope. Drip irrigation is ready, water is added through the bottoms.

Drip irrigation method from plastic bottles and rods

This watering system can be made in two ways: by attaching the rod to the bottom of the bottle or to its neck. In the first case, the bottle can be installed on the ground without additional equipment; in the second, the process of adding water to the bottle is greatly simplified.

In any case, the first thing you need to do is prepare the rod. To do this, wash out the remaining ink from it (in the case of using ballpoint pen refills) and close one of its ends with a plug. To do this, you can use a piece of a match or a wooden toothpick. Using an awl, make a small hole 3-4 millimeters from the closed end.

Now, 1-2 centimeters from the bottom of our container, we make a hole into which we insert the rod. It is no coincidence that the word “container” is used instead of the word “bottle”, since depending on the manufacturing method you choose, the bottom of the container can be either at the bottom of the bottle or at its neck. If you have placed the rod at the neck of the bottle, then you need to screw it (the neck) with a cork. We cut off the upper part of the resulting container, and essentially the bottom of the bottle, using a knife or scissors.

It makes sense to “capture” 2-3 centimeters of its wall along with the cut off bottom of the bottle. By making a vertical cut on it, this part of the bottle can be used as a lid to protect the container from debris. Now fill the bottle with water and see how quickly the liquid flows out through the hole made at the closed edge of the rod. The optimal speed is 10 drops in 5 minutes. The finished system is installed near the plant, and the end of the rod is placed in close proximity to the root system. To do this, the container with the rod is attached to a peg of sufficient length using wire or tape. The free end of the peg is stuck into the ground next to the plant.

Underground drip irrigation method from plastic bottles

To organize watering using this method, you will need a plastic container with a volume of 1.5–2 liters. You need to make several holes in it with an awl or a gypsy needle at a distance of 3–4 cm from the bottom. The number of holes depends on the type of soil, for example, for sandy soil two will be enough, but for loamy soil you will have to make at least four holes. To water moisture-loving plants, small holes are pierced across the entire surface of the bottle. Dig the container between the plants upside down to a depth of approximately 10–12 cm, with the neck remaining above the ground. Pour water through it using a watering can and screw on the lid, in which you have previously made a hole for air to escape.

Another option is to bury the bottle in the ground, neck down, after making several holes in it and screwing the cap tightly. The bottom of the container is cut off in such a way as to form a kind of lid that will prevent water evaporation. This method of irrigation is more convenient, since the tank is filled with water through a fairly wide hole.

Drip irrigation from plastic bottles is an excellent irrigation method for those summer residents who do not want to spend money on installing a full-fledged system. It is cheap and combines all the qualities and advantages that conventional drip irrigation from plastic pipes with your own hands. As a temporary measure, such irrigation can be considered ideal. And you can also see how to build it in the video.

The drip irrigation system allows for dosed irrigation of plants right to the very roots. After spending a little time, you can assemble such a system at home, without the need to purchase expensive components. At careful attitude DIY drip irrigation from plastic bottles will last for several years.

Advantages of using drip irrigation in the country

The main advantages of drip irrigation are the receipt of the required amount of moisture by the root system, as well as minimal physical effort and material costs. This type of irrigation is of interest to many summer residents and gardeners, since the drip irrigation system can be left unattended.

Watering beds with plastic bottles has big advantage– this is almost complete autonomy. Thus, a person does not need to stand with a hose or carry heavy buckets one after another to water the plants.

Unfortunately, a ready-made drip irrigation system connected to a centralized water supply is quite expensive. Therefore, summer residents and gardeners have come up with a good alternative - using old used plastic bottles. Of course, this option is not completely autonomous, since from time to time you will need to add water to the container.

But, nevertheless, such watering minimizes human resources, so you can pay more attention to other things or spend time relaxing. Drip irrigation using plastic bottles has the following advantages:

No need to purchase material. Plastic bottles are something that can be found in almost every home one way or another;
Ease of execution. By following simple instructions, you can do everything yourself, even if you have no experience in creating such systems;
Saving. Such watering allows you to significantly save time and effort spent on traditional types glaze;
Easy to use. All you need to do is go around the garden and fill the containers with water;
Rationality of watering. Water immediately flows under the top layer of soil, feeding root system plants. Also, water will not spill over large territory and evaporate due to high temperatures in summer. Thus, homemade watering promotes the full development and subsequent strengthening of the plant’s root system;
No waterlogging. When watering with a hose, a so-called “swamp” often forms in the holes. Drip irrigation helps avoid this;
Reducing weed growth. This system also allows you not to wet the excess surface. Thus, favorable conditions are not created for the growth of all kinds of weeds, and this, in turn, makes it easier to care for the land.

This method of irrigation will be especially useful for those summer residents who, due to circumstances, can only come to their dacha once a week. In this case, they will only need to fill the container before leaving. This volume of water will be enough so that the plants do not need moisture while the owner is away.

Did you know? Drip irrigation from plastic bottles can work on the principle of solar distillation, which is good for hot summers. To do this, place half a 1.5-liter container of water on the pre-mulched soil near the plant, and cover it with a five-liter eggplant without a bottom. When heated, the moisture will turn into steam, which will settle in the form of drops on the walls and then roll down to the soil. Thus, the stronger the heat, the better the soil will be moistened.

Options for manufacturing a drip humidification system

There are quite a lot of options on how to make such a system yourself. First, you need to consider all the options, and then choose the most optimal one, based on your capabilities and conditions.

Also, do not forget that you need to carefully select the location of the bottles and the intensity of the water supply. Various systems suitable for different schemes planting crops, and this must always be kept in mind.

The easiest way to make automatic watering with your own hands is to puncture a small hole in the bottom of the container and place it near the plant. This does not require any special preparation from you, but you need take into account the following nuances:

the hole must be microscopic. To do this, you need to pierce the container with a needle. Big hole will lead to rapid water consumption, which puts an end to the principles of efficiency and autonomy;
increasing the number of holes allows you to create a more humidified environment;
the container should be located as close to the stem as possible so that water flows directly to the root system;
The container can be buried a little next to the plant. This will avoid wasting water;
the container can be hung directly above the bush, if this option is suitable for the given crop;
a capacity of 5-10 liters allows you to leave the garden unattended for a whole week, which is especially important for summer residents living far from their dacha.

The use of plastic bottles for irrigation occurs according to a fairly simple scheme - due to direct contact of water with the ground. Water begins to gradually seep in, and the soil, after getting wet, clogs the holes. Once the soil dries out again, the holes will open and water will begin flowing to the roots of the plants again.

In this way, natural regulation of moisture in the soil occurs. If the soil is sufficiently saturated, then it simply will not absorb excess moisture. Once the container is empty, you just need to add water to it.

Important! Drip irrigation from plastic bottles is not suitable for fastidious plants with thin roots.

How to make drip irrigation (a buried container next to the plant)

In order to water using plastic bottles, dropping them near the plant, you need to follow simple instructions. Each bottle must be placed with its neck down, having buried it with a little earth for greater stability.

It is also necessary to make one small hole in the bottom of the bottle in order to facilitate the exit of water (the air will put pressure on the water and gradually displace it). The lid must be screwed loosely to ensure gradual seepage of water.

To prevent the container from being blown away by the wind, it must be buried in the soil to a depth of about 10-15 cm. Good irrigation will be facilitated by installation directly near the root. It is worth noting that it is only possible to accurately place the bottle during planting, when the container is dug into the same hole as the seedlings.

If the plants have already grown quite well, then the hole should be placed at a distance of at least 15 cm from the plant trunk. You must act extremely carefully so as not to damage the root system of the plant. If watering tomatoes through plastic bottles is carried out in clay soil, then when moistened it can easily clog inside the holes.

In order to prevent this, the outside of the plug should be tightened with a simple nylon stocking, or the bottom of the hole should be covered with hay or a piece of burlap. The lid is screwed tightly, and the bottle is placed at an angle with the neck down, and the hole is then covered with earth. The optimal tilt angle is 30-45°.

There is another way to organize drip irrigation of cucumbers in open ground. Using an awl, you need to make a lot of holes in the container. They are made in 5-6 rows, and the distance between the rows should be 2 cm.

The plastic bottle is buried in a vertical position with its neck up in the same hole as the seedlings. The main inconvenience is that the container must be filled through a narrow neck. But at the same time, the water from the container practically does not evaporate. Due to the fact that almost the entire container is underground, even a strong wind cannot knock it over. And the land plot itself will look more attractive because of this.

Important! Water should not immediately go into the soil. The essence of drip humidification is the gradual consumption of water over several days.

Hanging bottle watering

For creating hanging do-it-yourself drip irrigation of tomatoes in a greenhouse you will need:

any plastic bottle;
an awl or thin nail;
rope or wire.

To make hanging drip irrigation, you need:

cut off the bottom to make a lid;
Make two holes at a distance of 1-2 cm from the cut bottom on opposite sides of the bottle. Through these holes you need to pass a rope or wire that will be tied to the support. You need to make a small hole in the bottle cap. If the flow rate of water is too slow, the hole can be expanded slightly;
Hang the bottle over the plant.

When watering tomatoes in a greenhouse through plastic bottles, suspension system There are two advantages: ease of manufacture and the ability to finely adjust the intensity of irrigation.

Rod design

In order to do Irrigation of plants in a greenhouse using bottles and a rod, you need:

Take a plastic tube with a small diameter. A regular ballpoint pen refill works perfectly; it must first be washed with gasoline or solvent, removing all remaining paste and the writing element itself;
Seal one end of the tube tightly. If it is a pen refill, then a match or toothpick will work well;
Secure the other end into the neck. You can also cut a hole of the required diameter in the sealed lid and install a tube in it;
Seal the tube attached to the neck. This can be done using ordinary plasticine, electrical tape and other improvised means;
Make holes with a needle at the end of the tube. They should be as close to the plug as possible. The number of holes and their diameter are selected individually, based on the required intensity of humidification. It will be quite sufficient if one drop of water flows out in a couple of minutes;
Cut off the bottom of the bottle and place it in the soil with the neck down;
Pour water into the bottle.

You can also cut a tube into the wall of the bottle near the very bottom. This will allow you to avoid cutting the bottle and make it much easier to move it around. land plot. Watering in plastic bottles in a greenhouse has a great advantage - due to the length of the tube, the bottle can not be placed very close to the plant.

If you place the bottle between several bushes, you can move the tube and water the seedlings one by one.

Important! If you choose to humidify using a tube inserted into the wall, then do not forget to tightly close the bottle with a lid. This will prevent rapid evaporation of water.

DIY drip irrigation (buried plastic bottle)

Experienced gardeners recommend trying the drip irrigation option, in which the entire bottle is buried in the ground. In this case, you need to make several holes as close to the bottom as possible. After this, the bottle is buried in the ground, and only the neck remains on the surface, through which the water will be poured.

It is worth noting that this method of drip irrigation provides less moisture, and this is not suitable for plants with long rhizomes.

Drip irrigation from bottles: all the pros and cons

Like any other type of irrigation, drip irrigation has certain advantages and disadvantages. Among the advantages it is worth noting the following:

Anyone can do drip irrigation using plastic bottles. The manufacturing procedure does not require any special knowledge or skills;
creating a drip irrigation system from plastic bottles does not require a large financial investment. This is justified by the fact that plastic bottles are the most common and cheapest material for recycling;
The operating principle of drip irrigation almost completely eliminates the factor of wasted water consumption. This is especially true when the site does not have access to a central water supply system;
water from plastic bottles is distributed as evenly as possible and progressively moisturizes the root system of the plant;
in plastic bottles, water quickly warms up to a temperature that is comfortable for most plants;
A drip irrigation system made from plastic bottles can be easily installed, dismantled or replaced.

But at the same time, there are certain Disadvantages of using such an irrigation system:

such a system will not be able to provide high-quality watering of a large area;
drip irrigation from plastic five-liter bottles cannot completely replace full irrigation, since drip irrigation only allows you to temporarily maintain the required level of moisture;
When used in loamy or heavy soils, the drip system from bottles clogs quite quickly and stops functioning.

The summer heat is a real test for summer residents and amateur gardeners. Almost all planted plants are very difficult to tolerate high temperatures and lack of rain. To avoid death vegetable crops, it is necessary to constantly water all the beds with a hose. If in urban conditions daily watering does not cause any inconvenience, since the site has a centralized water supply, then for residents of villages and dachas this is a real problem.

In order not to torment themselves with carrying heavy containers of water, home craftsmen have come up with an effective way to constantly supply moisture to the root system - drip irrigation. With its help, you can constantly saturate your plants with water, even when no one is at home. For home use experts recommend installing ready-made purchased structures or homemade devices. This article will tell you how to make your own drip irrigation system from plastic bottles that are found in every household.

The drip system has a large number of advantages, which make it so popular among summer residents. Among the main advantages are:

Homemade drip irrigation systems, available materials for their manufacture

To install a drip irrigation system in your garden, you can use not only purchased products, which are very expensive, but also homemade designs. The most popular of them:

from plastic bottles;
from droppers.

Important! If a homemade irrigation system from droppers has a more complex design, then from plastic bottles it is simpler and more understandable.

Since almost every family has plastic bottles in their household, craftsmen have come up with worthy uses for them. There are several simple ways manufacturing homemade drip irrigation systems, each of them is designed using a specific technology.

Submersible drip irrigation system

Such drip systems are ideal for watering tomatoes, cucumbers, peppers, eggplants, etc. Their design is quite simple and straightforward and does not require much effort.

Types of drip irrigation

To work you will need:

plastic bottle (preferably large volume);
nail or sharp awl;
garden shovel.

Manufacturing and installation technology of a submersible drip irrigation system:

In a selected area of the garden, a hole is dug to accommodate the structure.
Holes are made on a plastic bottle using an awl or a hot nail (the more, the better).
Immerse the product in the ground and carefully cover it with earth (up to the neck).
Carefully pour water into the finished homemade system and close it tightly with a lid (the water will evenly seep into the soil, thereby saturating the plants with life-giving moisture).

Watering can type drip irrigation system

It's also enough simple system, to make it you will need to spend 10-15 minutes of free time.

Required tools and materials:

sharp stationery knife;
nail;
fire source (eg gas burner);
bottle with cap;
garden shovel.

Watering can type drip irrigation system

Manufacturing technology:

The nail is heated on fire.
Make them 2-4 holes on the lid plastic bottle(how more holes, the more water will penetrate into the soil).
Carefully cut off the bottom of the bottle using a sharp knife.
A small hole is dug in the garden bed to place the bottle.
The prepared vessel is immersed in the ground to a depth of 10-15 cm and securely fixed.
Pour water for further watering of vegetables.

Rod type drip irrigation system

This is another “dripper” for watering. She has an interesting appearance, very similar to a hedgehog. To construct it you will only need available materials.

Scroll necessary tools and materials:

plastic bottles;
old ballpoint pens;
matches;
nail or awl;
a source of fire for heating a sharp object.

Rod type drip irrigation system

Manufacturing technology of a drip irrigation system for a summer cottage:

The ink refills are removed from the ballpoint pens and the caps are removed.
Using an awl or a hot nail, holes are made to accommodate the housings of the handles.
Prepared handle housings are inserted into the finished connectors, and a match is inserted into one side of the handles.
Carefully pour water into the prepared bottle and close it with a lid.
The finished structure is placed on the garden bed so that it does not fall and damage the planted plants (water will slowly flow down the rods into the ground, thereby watering the selected plants).

Homemade drip irrigation systems made from plastic bottles are unique free designs that allow you to feed the root system of vegetable crops and other plants with water around the clock. Make garden “drippers” with your own hands at home from available materials, and you can check all the delights of their work without leaving home.

Today we will talk about root drip irrigation of vegetable crops in the garden. How to do DIY drip irrigation from plastic bottles you will find out from the article.

Let's consider the advantages of root drip irrigation, because this is a solution for those who cannot water their plants every day.

Root watering has a number of advantages– a crust does not form on the soil surface (the soil surface always remains dry), weeds do not grow, and the soil does not become waterlogged (this eliminates the formation of rot).

Thanks to the Internet, we learned an excellent method for drip root irrigation from 5-liter plastic bottles.

This method has its own subtleties, which we will talk about.

For watering you will need: the required amount of plastic bottles with caps with a volume of 5-6 liters (more is possible if the distance between plants allows) and a 2 mm drill or a sharp awl.

Using a drill or sharp awl, make 2 or 4 holes on opposite sides 2-3 cm from the bottom of the bottle.

Attention: do not make holes with heated nails, etc. - they will come out differently and, as a result, water will be absorbed into the soil differently.

Usually the holes are made on the first horizontal strip from the bottom of the bottle, thereby all the holes will be located at the same distance from the bottom (the pressure will be evenly distributed between them).

2 holes usually done if the bottle is placed between two plants in the middle (the holes should be directed towards these plants) and on light soils.

4 holes This is done by placing the bottle in the middle between 4 plant bushes (pointing the holes at the plants).

The bottles are buried in the ground at about 1/2 height (should be 7-10 cm from the holes to the soil surface), filled with water, and the lids are screwed on tightly. This is how root drip irrigation is carried out.

If the plants have not received moisture for a long time, you can open the lid, then some of the water will quickly go into the soil. Then fill the bottle again and close the lid tightly for drip irrigation.

Attention: the number of holes in the bottle can be greater, it all depends on the properties of the soil; the worse it absorbs moisture, the more holes are needed.

If the bottle is intended for watering one plant, for example a rose bush, then it is better to make 3-4 holes on one side with a distance of 2-3 cm along one line. Use these holes to turn the water bottle towards the plant.

If the soil is wet, then the water will not drain; only dry soil will draw water. With this irrigation system, the top of the soil remains dry and loose.

Video - Do-it-yourself root drip irrigation

Like this system automatic watering with your own hands it turned out - useful thing for every gardener. Can be used both in greenhouses and open ground.

Thanks to this watering, there is enough water for the plants for 5-7 days, of course it all depends on weather conditions.

If you are the owner of a summer cottage or are planning to purchase one soon, you should understand that caring for a vegetable garden will then become a regular task.

Plants grown in the countryside need constant feeding, and it is not always possible to ensure timely access of water to the soil.

Practical water supply equipment for summer cottage- the simplest solution to the problem, but even this method has many disadvantages associated with the cost of equipment and volumes of fluid consumption. And watering with a hose requires effort, time, and - most importantly - personal presence. So how can you ensure the safety of your plants at all times?

One of the most effective methods available to every summer resident is drip irrigation using plastic bottles. This mechanism ensures a continuous supply of water in the required quantity to each section of your garden. The implementation of this method will seem quite simple even for those who have not previously cared for plants.

Considering how many bottles are thrown away every day, finding all the necessary materials will be very simple and quick, and providing watering with bottles will not require much effort.

How to make your own drip irrigation from plastic bottles? The construction of such a system is done very quickly. All you need to do is collect enough plastic bottles to water tomatoes, cucumbers and other plants that have limited access to water at a certain time. Thanks to the variety of methods for such equipment, each of you will be able to choose the most practical option, and, if desired, decorate your garden.

Our article contains methods of drip irrigation and a video of drip irrigation of garden beds from plastic bottles with your own hands.

Do-it-yourself drip irrigation from plastic bottles, photo

Benefits of drip irrigation

A do-it-yourself drip irrigation system made from plastic bottles is one of the most famous options for caring for a garden. The popularity of this method is due to big amount benefits.

One of the most important advantages is possibility of organizing irrigation without experience in similar works . Even a child can be tasked with creating a drip irrigation system from plastic bottles, since the preparatory work does not require much effort.

Other things positive characteristics Such a system includes the following features:

you can implement it yourself

acquisition necessary materials will not require high costs(typical for the purchase of modern drip installations), and in some cases, preparation may generally be free;
when ensuring watering of beds using plastic bottles water flows to the roots of plants without spilling in the surrounding area and without creating educational opportunities marshy areas, spoiling the plantings;
watering with plastic bottles is possibility of minimal but effective fluid consumption. Water will flow to the plants in the right quantity, which distinguishes such a system from more expensive ones;
strictly defined humidity level maintained using this method will create the most favorable conditions for growth, preventing rotting processes, preventing diseases and other undesirable consequences;
in cases where you do not have the ability to regularly monitor the irrigation process, homemade drip irrigation from plastic bottles will be the best solution to the problem;
to install such a system no special skills or knowledge required, and the process itself will be quick and hassle-free.

Regardless of the size of the space, planting characteristics, specific climate conditions and other factors, the use of plastic watering bottles will prevent many problems and ensure the safety of your plants.

Drip irrigation from plastic bottles, photo

Preparatory process

How to make drip irrigation from plastic bottles? First of all, stock up the right amount auxiliary materials.

In order to create a comprehensive irrigation system, you will need:

empty bottles (select sizes plastic containers depending on the type of plants and the expected watering time);
ordinary stationery rods;
a small knife (preferably a stationery knife);
awl.

Some methods require the use additional materials: plasticine, foam rubber, matches and other items.

Before you start preparing containers, rinse the bottles thoroughly. All possible methods of drip irrigation from plastic bottles involve creating small holes for moisture to enter the soil.

Important! When using pen rods to create an irrigation system, make sure there are no pastes or caps.

At subsequent stages, depending on the specifics of the chosen method, the rod will be attached to the container and inserted into the ground, ensuring unhindered access of the liquid to internal structure soil. This mechanism promotes the gradual entry of moisture, prevents excessive flooding of the site and maintains favorable conditions for growth.

Since you will not always be able to control the watering process, take care to securely fasten the structure: strong gusts of wind can break unstable containers.

Depending on the type of planting, choose the most suitable option. For example, watering a tomato through plastic bottles is done under the soil, while flowers can also be watered externally.

Common watering methods

Method No. 1

Features of the simple option drip irrigation at the dacha from plastic bottles is almost completely described in the preparatory work. This method does not involve the use of additional materials: it is enough to cut a hole in the bottles to allow liquid to enter.

The stationery rod is closed on one side with a stopper. A small hole is cut 3-4 mm from the cork. The finished rod must be inserted into the bottle, filled with water and placed near the plant.

Method No. 2

To water the garden using plastic bottles, create a hole 20-25 mm from the bottom of the bottle: a rod will be attached to it, supplying liquid to the soil. The cork from the bottle is unscrewed, and the container itself is placed in the soil with the neck up.

Attention! When initially testing this method, it is recommended to monitor the process of liquid inflow: analyzing the rate of water inflow and the degree of its absorption into the soil will allow you to determine the required volumes of liquid and the need to create other holes.

By increasing the size of the hole, you can change the volume and time of water flow. Do not forget that in hot weather moisture will evaporate, so periodically add water to the installed container.

For uniform watering over 4-5 days, about 10 drops per five minutes are required. Of course, you will not achieve the desired results the first time, so check the speed and volume of irrigation at the initial stage of watering.

Method No. 3

Quite often, summer residents wonder how to make drip irrigation with their own hands from plastic bottles in flowerpots and boxes with seedlings? This method will not cause you any difficulties either. It is enough to secure the bottle next to the flower or plant in such a way that the liquid flows to the roots of the seedlings.

A small hole is made at the bottom of the bottle to allow moisture to enter. Then, using twine or wire, the structure is fixed at the desired height and filled with water.

Important! Despite the effectiveness of this method, it is not recommended to use it regularly. Watering plants using this method is suitable for those cases when you need to leave the dacha for several days.

Method number 4

One of the most popular methods of do-it-yourself drip irrigation at the dacha from plastic bottles is the use of stable two-liter containers. In this case, the bottle is washed out, a small hole (0.3-0.5 mm) is cut in the lower part to allow air to enter, the container is filled with water and immersed in the ground with the neck down.

The soil will prevent excessive flow of liquid, and the size of the container will allow you to forget about the need for irrigation for a long time.

Attention! This method will only be effective if water can seep into the soil and the neck will not become clogged with soil.

Do not forget that the roots of the plants should not be damaged during this installation. For example, watering tomatoes using plastic bottles requires great care, since the roots of such plants are extremely susceptible to outside contact.

Method No. 5

To implement this method, you need to cut off the bottom of the selected container. Small holes are pierced throughout the entire area of the bottle, and the cap is screwed tightly to prevent excessive liquid inflow.

Advice: Depending on the nature of the soil, the number of holes will vary. For irrigating sandy soils, two holes are enough, and for loamy soils - from four.

The finished bottle is installed in the soil approximately 15 cm with the top down. If you want to prevent debris and soil from getting into the irrigation fluid, cover the cut portion or do not cut the entire length of the bottom of the bottle.

Do-it-yourself drip irrigation from plastic bottles for cucumbers can be done by piercing holes not in the bottle, but in the closed lid. In this case, the moisture will concentrate in a strictly established place, without spreading due to pressure.

In addition to watering cucumbers using plastic bottles, you can care for eggplants, peppers and tomatoes in this way.

Method No. 6

The next option is suitable for those who do not know how to water the beds using plastic bottles without digging the container into the ground. It is enough to take a large bottle, fill it with liquid and close it with a piece of foam rubber from the neck.

The finished container is placed next to the plant (closer to the root system) in a horizontal position. To allow air to enter, leave part of the bottle unfilled.

A video on how to make drip irrigation from plastic bottles will help you learn about the intricacies and details of this process and study in detail the features of the practical implementation of the proposed methods:

Skillful use of plastic bottles in the garden will allow you to save money by providing reliable and long-term protection for plants, regardless of the weather.

As a rule, large containers with a volume of one and a half to two liters are used for this purpose: such sizes are sufficient for necessary nutrition plants even in your absence.