Review of pyrolysis TT boilers "Bourgeois-K" and reviews from owners. Pyrolysis solid fuel stove Teplogarant "Burzhuy-K Pyrolysis boilers bourgeois K standard 10

A pyrolysis boiler is a real godsend for those who live in private houses and dachas where there are frequent interruptions in the supply of gas and electricity. This unit is completely autonomous and does not require connection to either electrical or gas distribution networks. The device has already earned wide popularity and recognition due to the fact that it is optimally suited for working in the Russian climate.

The modern stove "Burzhuy-K" is essentially similar to the famous potbelly stoves of the beginning of the last century. You can use any solid fuel as fuel for the stove - wood, coal, pellets and briquettes, depending on which fuel is more accessible and cheaper in your case.

But the operating principle of this device is fundamentally different from other solid fuel boilers. During the operation of the boiler, combustion products saturated with carbon monoxide, since the design provides for a system for their afterburning.

By design, the device is a one-piece unit consisting of a two-chamber firebox and a water circuit. The built-in temperature sensor allows you to accurately set the temperature with an error of up to 3 degrees. One load of fuel is designed for 15 hours of operation of the device.

Delivery Card

Delivery in Moscow within the Moscow Ring Road

The cost of delivery of goods by our autocourier is from 1500 rubles.

Delivery in the Moscow region

In the Moscow region from 1500 - 5000 rubles.
To other regions 45 rubles per kilometer.

Attention!!!

Delivery of goods on Fridays, Saturdays and Sundays is cheaper. Due to the specifics of our products, our customers ask for delivery to be made on WEEKENDS “while everyone is at home”, we collect orders and the driver can close up to 10 points per day. Contact our managers for details.

Note!

The cost of delivery in Moscow and Moscow Region includes driver assistance when unloading goods from the back of the car. If necessary, you can arrange for an additional loader to carry the goods at a cost of 2,000 rubles.

Delivery to other regions of Russia

Delivery of our products to other Russian regions can be carried out with the involvement of our partners - transport companies. Delivery to the regions is carried out according to the following scheme:
The buyer places an order for the product.
Within 48 hours after receipt of money for the goods, our company makes the shipment to the transport company, after which the customer is sent a bill of lading number, by which you can easily track the movement of the order.
Upon arrival of the cargo in the customer’s city, the operator of the transport company contacts him, informs him of the delivery cost and agrees on a convenient time for delivery of the goods or pickup. You can find out the exact cost of delivery to your city on the transport company’s website by entering the dimensions and weight. We actively cooperate with PEC http://pecom.ru, Business Lines http://www.dellin.ru/ (recipient's passport details are required when filling out) or any other companies of your choice.

Pickup

We offer self-pickup of products from our warehouse at the address: Moscow, Bulatnikovskaya str. 20, entrance No. 2.
Pickup and loading of goods is free of charge.

Note!

When self-delivering products on the buyer’s transport, we strongly recommend that you study the corresponding drawing on the website in detail and carefully measure the parameters in advance doorways your car. This must be done to avoid damage to the car interior, since due to the complex geometry and protruding parts of the 0.5–4 mm product, it is very difficult to carry the product into a too small doorway of a passenger car!
Loading of products using a forklift is carried out in trucks on weekdays from 9:00 to 18:00. Our company delivers goods with an accuracy of up to half an hour, provided that the customer provides complete and accurate information about the time of delivery of the car one day before.

Pyrolysis (gas generator) boilers are a good option for heating if you have cheap solid fuel at your disposal or other energy sources are simply not available. The equipment runs on wood, coal, peat briquettes, but unlike conventional TT it has more high efficiency– up to 92%. Exactly like this efficient systems Produced by TeploGarant.

The Burzhuy-K pyrolysis boiler has high productivity due to dual use fuel energy. In addition to the main combustion process, its design also allows the release of released gases, which are usually simply removed from the firebox through the chimney. They are burned in an additional chamber with a separate air supply. And here is the primary fuel of the boiler long burning“recycles” in conditions of lack of oxygen. This makes firewood smolder slower, and gas generation is more efficient. Boiler productivity increases, as do the time intervals between fuel fills (up to 8 hours), and heating costs are reduced.

Many owners note in their reviews that a pyrolysis boiler produces a small amount of ash after burning wood and briquettes. That is, the maintenance of the equipment is simplified if its operation is configured correctly. But if the technology is violated, problems arise: a layer of tar and soot appears on the inner walls of the models, which is very difficult to remove. Why is this happening?

Installation Requirements

Judging by the reviews of owners and specialists, any pyrolysis boiler Burzhuy-K is demanding in terms of performance and correct connection chimney. It should be:

• made of stainless steel;
• insulated and sealed;
• made without horizontal sections and with a minimum of turns;
• be of sufficient length to rise above the roof by at least half a meter.

If all these requirements are not met, the boiler will quickly become overgrown with soot from the inside, or even simply will not be able to enter gas generation mode. That is, you will not get pyrolysis combustion, and Burzhuy-K will begin to work like a regular solid propellant. As a rule, it is failure to comply with installation requirements that leads to inefficiency in the heating system, excessive fuel consumption and other problems. Negative reviews appear, and owners think about buying other equipment.

The lineup

Having figured out how a pyrolysis boiler works, let’s move on to a review of Burzhuy-K devices. The entire range of equipment from domestic manufacturers can be divided into two groups according to their intended purpose:

• Water heaters use their own double shell casing as a heat exchanger. Some models can be connected to an additional DHW circuit.
• A pyrolysis air-heating boiler does not have a water jacket, and therefore physically cannot produce power exceeding 150 kW.

In turn, TeploGarant produces a line of domestic (up to 100 kW), industrial (up to 800 kW) and universal mobile boilers. They all differ from each other not only in performance, but also in the installation method. We will consider the characteristics of the most popular models from these series.

1. Burzhuy-K Standard.

A family of compact and inexpensive floor-standing boilers for domestic use. Since they are considered budget, the equipment does not have a mechanical draft regulator that controls the opening of the damper. But the duration and efficiency of burning each load of fuel will depend on it. There is also no thermomanometer, but TeploGarant offers to buy the missing elements of the system separately.

Standard series boilers with a power from 10 to 30 kW are in great demand as they are capable of heating a private house area 100-300 m2. All-welded steel structure has additional cladding with heat-resistant spraying and non-flammable basalt thermal insulation. This equipment is non-volatile, since, unlike foreign analogues, it operates without forced pressurization.

As for functioning in the heating circuit, here the Burzhuy-K pyrolysis boiler heats the liquid in the system due to water jackets around the combustion chambers. So the unit body itself is a very effective heat exchanger. The supply pipe is located at the top, the heated water outlet is at the bottom.

2. Bourgeois-K Modern.

This series is more expensive and is represented by models that produce power in the range of 12-32 kW. Unlike the Standard, there is already the possibility of connecting to an additional heat exchanger of the DHW circuit. Just do not forget to review the power characteristics, because part of the generated energy will be spent on water supply. The efficiency of Burzhuy-K Modern reaches 82-92%, and the design is supplemented with a draft regulator. This simplifies operation management, since simple automation is able to control the air flow in the combustion chambers.

High performance products

Industrial heating boilers Burzhuy-K, presented in this series, produce a power of at least 50 kW. The maximum that these units are capable of is 800 kW (enough to heat an area of ​​8000 m2). We will not give a description of the principle of their operation, since these models completely replicate the Modern household lines. The only difference is in the size of the firebox and, accordingly, in the price.

2. Air heating TV.

The characteristics of the TV line systems are more modest: their operating range is 12-150 kW. However, any long-burning boiler is capable of heating air up to +60-300 °C, and requires fuel loading much less often than water models. TV units are in little demand because they do not use the most efficient coolant. The cost of the equipment is also quite high, but they are ideal for heating production facilities.

These are already automated systems operating from the network, since the pyrolysis boiler provides for forced air injection. But experts in their reviews recommend using simplified chimney options with TV, since the pipes in these models constantly need to remove soot and condensation.

3. External Tn.

Modular TeploGarant series Burzhuy-K Tn are mobile equipment for use, so to speak, at the place of requirement. Although the weight of the units is considerable: the lightest T-12AMK pulls 400 kg, and the mass of a 100-kilowatt unit reaches 2 tons.

If somewhere outside the room there is a need for economical and long-lasting heating, it is better to purchase a modular device. Pyrolysis solid fuel stoves are used when it is not possible to create a mini-boiler room in the house. The Tn models cope with the work themselves, since the maximum configuration includes everything necessary:

• circulation pump;
• water filter;
• defrost protection – automatic coolant run if the pyrolysis boiler has not been turned on for a long time;
• shut-off valves;
• safety and mixing valves.

Like other series, Burzhuy-K Tn models are easily integrated into any heating system, regardless of the features of its management. Outdoor solid fuel boilers have an improved chimney design, ensuring a longer service life. The equipment comes with a collapsible frame. It gives an aesthetic appearance, protects from atmospheric influences, and the walls and roof of the “booth” are covered with thermal insulation.

Reviews from people

“My first disappointment with the pyrolysis Standard is the flimsy grates. They literally burned out for me during the season. As I understand it, many people face a similar problem. Most likely, it was necessary to replace the grille with something more serious immediately after purchase, but I didn’t want to get into new technology. Otherwise, it’s a normal solid-fuel device, although the price of the Burzhuy-K model clearly does not correspond to the functionality.”

Valentin Basov, Nizhny Novgorod.

“I struggled for a long time with cleaning the boiler - almost everything was clogged with tar from the inside. And getting into Burzhuy-K is not an easy task (those who have tried will agree with my opinion). It’s good that I came across a review where clever man I advised to insulate the boiler room under the solid fuel unit. Oddly enough, the problem was solved. Probably due to the low temperature of the air entering the pyrolysis burners, soot was released.”

Nikolay, Moscow.

“The characteristics that the manufacturer claims are probably achievable on Bourgeois only when using ideal fuel (very dry, with good calorific value). But I don’t want to spend money on factory briquettes, and to be on the safe side, I decided to buy a long-burning boiler with a power reserve of 25%. Now the house is warm enough, but not hot, so I advise you to focus on this indicator. Buying a model, of course, will be much more expensive, but it’s better than freezing in winter.”

Dmitry, St. Petersburg.

“I’ve been using the 20-kilowatt Bourgeois-K Standard for two years, and the longer I go, the more I like it. Although I couldn’t get used to it the first winter: I had to clean it all the time. Now I’ve gotten used to it, I’ve adjusted the boiler’s operation, and there are no such problems. I’ll give you some advice: put in firewood that is not only dry, but also large enough, then you really won’t have to add it more often than every 8 hours.”

Oleg Ponomarev, Syktyvkar.

Model Burzhuy-K	power, kWt	Heat exchanger (DHW), l	Cost, thousand rubles.
Standard	20	28	49,8
	30	45	62,8
Modern	12	30 (2)	59,9
	32	50 (3)	89
T	50	70	137,9
	500	400	808
TV-100	35 – 100	—	241,2

Bourgeois-K STANDARD-10 is a model of a pyrolysis boiler designed to serve large areas. The main advantage of the device is that it does not require connection to an electrical outlet. Firewood is used as fuel. The boiler is connected to the water supply system and provides efficient heating of the room.

Features and Benefits:

• Reliable design. Like all solid fuel boilers Bourgeois, this unit is made from high-quality durable steel, designed for long-term use. Installation and operation of the boiler will not cause any difficulties; it is equipped with everything necessary (supplied with grates, thermometer, pressure gauge) for quick installation and efficient operation. The cast iron sectional heat exchanger is resistant to corrosion - its service life, declared by the manufacturer, is at least 15 years.
• Autonomy. Bourgeois-K STANDARD will allow you to create a full-fledged energy-independent heating system without any difficulties - the installation of the boiler does not require special approvals or permits, it operates without being connected to electricity, which means its performance will not be affected by possible voltage surges.
• Open combustion chamber. Practicality of use is ensured by a stationary vertical chimney, through which combustion products are removed due to natural draft. The well-thought-out design of the Bourgeois-K STANDARD boiler and the special combustion process made it possible to achieve a significant increase in time with one filling (8-12 hours), compared to most solid fuel boilers of a similar class. The efficiency of the unit reaches 92%.
• Versatility and cost-effectiveness. To create a comfortable atmosphere in your home, you do not need expensive fuels. The boiler runs on peat, coal, firewood, wood briquettes, pellets and, importantly, even wood waste. Pyrolysis technology allows reducing fuel consumption by up to 3-5 times compared to analogues.
• Delivery set: boiler, grates, technical data sheet

To create comfortable climatic conditions in private homes and commercial premises, a series of single-circuit pyrolysis boilers STANDARD was created from famous manufacturer Burzhuy-K. Productive boilers do not require connection to the electrical network and are distinguished by their efficiency. Convenient control system and reliable protection during use, ensure safe operation of boilers.

A pyrolysis boiler is a system whose operating principle is based on the combustion of solid fuel. The main difference from conventional solid fuel stoves is the release of gas, which is also used for heating heating equipment. This leads to fuel savings, since the frequency of laying is significantly reduced. A review of TeploGarant Burzhuy-K pyrolysis boilers, reviews and recommendations from owners will help you get up to speed.

The long-burning solid fuel pyrolysis furnace BurzhuyK can be used both in private homes and in industrial premises. Thanks to compact size unit, it is not difficult to allocate space for a boiler room. Firewood is loaded on average once every 12 hours. Combustion occurs in 2 stages: in the first, the wood burns, releasing pyrolysis gases. The design assumes the presence of a second chamber into which combustion products enter. At the second stage, the gas is burned, due to which the efficiency of the system becomes significantly higher. Depending on the model, the boiler is equipped with a mechanical thermostat, which leads to automation of the process; different kinds fuel.

Technical features

The pyrolysis heating system is confidently conquering the domestic market. Due to rising prices for electricity and gas, owners of private houses are looking for a worthy alternative to your old heaters. The following features encourage you to buy a pyrolysis solid fuel heating boiler of the Burzhuy-K series:

• Installation does not require special permissions.
• A wide range of models makes it possible to purchase a boiler of optimal power.
• It does not take much time for the furnace to reach optimal mode.
• Complete combustion without ash formation is ensured.
• There is no need for constant adjustment of work.
• Not only firewood is used, but also coal.

The characteristics of the boiler will depend on the specific model chosen. The determining indicator is power - it affects the performance of the unit. Pyrolysis boilers from LLC Burzhuy-K can have parameters from 10 to 2,500 kW.

Advantages of BurzhuyK stoves and selection criteria

Heating systems using pyrolysis boilers are becoming increasingly popular. Compared to other types of devices, Burzhuy-K has the following advantages:

• Simplicity of design.
• Economical consumption.
• Compact sizes.
• Possibility of use different types fuel.
• Easy to use.
• Autonomy.
• Complete combustion of fuel, no ash.

The number of disadvantages of this equipment is much less, but they still exist:

• High chimney clutters up the space.
• Despite domestic production and the absence of customs clearance, the price cannot be called publicly available. The cost of a Bourgeois-K heating boiler reaches 2,500,000 rubles.

The first thing that is determined when purchasing a pyrolysis furnace is power. It should be sufficient to heat the entire house. According to standards, 10 m2 requires 1 kW. If there are several models required power you should pay attention to additional functions. Various modifications may contain an automatic draft regulator or a hot water supply circuit, which will facilitate the operation and maintenance of the boiler and allow hot water for household needs.

Reviews of TeploGarant gas generator boilers

« We decided to replace the old heating system in the house. We were advised to use pyrolysis boilers from Burzhuy-K LLC; the installation was carried out by craftsmen. Over the course of a year of work, several unpleasant aspects have emerged: firewood burns out in 2-3 hours, that is, 3 times faster than indicated in the equipment passport; From time to time the chimney pipe and the inside of the stove become clogged. In the second year, the grates burned out. Unfortunately, the data stated by the manufacturer does not correspond to reality. Judging by the reviews, the Bourgeois-K T-20A did not please anyone, I will return the boiler under warranty. We hope the replacement model will be of higher quality.”

Andrey, Vologda.

“We purchased a pyrolysis single-circuit boiler of the Burzhuy-K T-10 series for two-story house. There have been no complaints in 3 years. We installed it ourselves and did it successfully. It functions well, is very economical (loading fuel in 10-12 hours) and easy to use (you can set the required temperature). Easily copes with heating a house of 100 sq.m. We're happy with the choice."

Marina, Moscow region.

“I have 2 pyrolysis boilers Burzhuy-K TA-20 installed in my house. During operation (2 years), both leaked and had to be replaced under warranty. New stoves have been operating without repair for almost a year, most likely something in the design has been changed. I hope I don't have to return any more. Otherwise, I’m happy with the boiler; the wood burns in 8-9 hours (I consider the consumption quite acceptable). Cleaning is necessary no more than 2 times a year.”

Konstantin, Tyumen.

“We bought a pyrolysis solid fuel boiler Burzhuy-K Iskra 4 years ago. Accepts any solid fuel from cardboard to tires and requires cleaning 2 times a year; chamber and grates - as they are filled, approximately once a month; As for the chimney pipe, it has never been cleaned, as everything burns out. For those who doubt their choice, I recommend boilers from the Burzhuy-K company.”

Vorobyov Anatoly, Chelyabinsk.

“I’ve been using the Burzhuy-K T-20A since the beginning of the season. I installed it to heat a car wash with an area of ​​155 m2 with a ceiling height of 3 m. In 2 months, the wood consumption was about a cubic meter. Last year I had to use eclectic heaters, the bills cost almost 10 times more than the price of fuel. The cost of the boiler will be recouped in two months. Loading is done by the washing staff: they add 2-3 times a day, very little ash remains. I consider purchasing a stove profitable.”

Kondratenko Sergey, Bryansk.

“I have an old homemade boiler of my own design, the efficiency is approximately 96%, but it is for coal. I started to hit my pocket and bought Bourgeois 20. It’s good that I didn’t cut out the old one. With our material (pine, larch) and temperatures above -40 there is no use for it. From loading to loading – 3 hours, only in the months of September-October, March-April – maximum 5 hours.”

Kamenshchikov Sergey, Tula.

“The Burzhuy-K T-12 boiler is installed in a room where the temperature is not lower than +20. The chimney is 7 m, heats normally, does not smoke, there is no condensation or pyrolysis combustion. Small pine firewood burns for 2 hours, large ones - 3. Before that, there was Karakan-15 - one stash was enough for 2.5 hours. Karakan-15 cost 13,000 rubles, and Burzhuy-K - 44,000.”

Anatoly, Moscow.

Content

1. What is a pyrolysis boiler?
2. Types and specifications boilers Burzhuy K
3. Advantages and disadvantages
4. Installation features
5. What boiler owners say Bourgeois K

Introduction

Many owners of private houses are increasingly choosing a pyrolysis boiler as a heating source. However, imported devices have a significantly high cost. Not long ago, Russian-made solid fuel pyrolysis boilers under the Burzhuy K brand appeared on the domestic market. During this time, they have earned many flattering reviews from both consumers and professionals. In this article we will look at the lineup Bourgeois K boilers and let’s see what their main advantages are. So let's get started.

What is a pyrolysis boiler?

Pyrolysis is a method of dry distillation of solid fuel. Under the influence of high temperature, it decomposes into solid and gaseous components, which are then burned separately.

Photo 1: Heating hot water pyrolysis boiler Burzhuy K

1. With manual air supply adjustment

   The amount of air supplied is adjusted using an adjusting bolt.

2. With automatic adjustment

   The amount of supplied air is adjusted automatically using a mechanical temperature controller

3. With automatic adjustment and FGP circuit

   In addition to the presence of automatic air supply, the solid fuel boiler is double-circuit, i.e. equipped with an additional hot water supply circuit.

Photo 3: Long-burning pyrolysis TT boiler Bourgeois K

Solid fuel boilers Bourgeois K can operate on the following types of fuel:

• firewood;
• coal of any brand;
• woodworking waste.

The following is used as a body carrier:

• water;
• non-freezing liquid.

The plant produces these three modifications of pyrolysis boilers with a capacity of 10, 20, 50 and 100 kW. Below is a table of models presented on the official website:

In addition to the devices listed above, the company BURZHUI-K LLC announced the release of a new model with an electric heating element.

Let's also consider other technical characteristics of solid fuel boilers Burzhuy K:

• Efficiency 85%;
• Weight from 180 to 900 kg depending on the power of the pyrolysis boiler;
• Maximum operating temperature 90C;
• Output gas temperature up to 150C;
• The minimum permissible pipe height is from 7 to 13 m;
• Chimney diameter from 150 to 250mm.

Return to contents

Advantages and disadvantages

Heating boilers Bourgeois K have a number of advantages, thanks to which they have taken a leading place in sales among domestically produced devices. Let's take a closer look at their advantages:

Photo 4: Floor-standing pyrolysis TT boiler Burzhuy K

• thermal insulation

  All modifications of Burzhuy-K boilers are equipped with reliable thermal insulation from mineral wool. This will allow you to significantly reduce heat loss and reduce the cost of heating your home.

• steel body

  The body, as well as all other components, are made of special heat-resistant and corrosion-resistant steel, developed specifically for the production of boilers and capable of operating under pressure. The device contains more than 200 different parts.

• powder coating

  Powder coating protects the body of the solid fuel boiler from moisture and various salts and acids. This coating is not afraid of high temperatures and has high abrasion resistance and strength, which will allow for a long time keep decent appearance boiler

• automatic combustion control

  Thanks to the presence of a mechanical temperature regulator, the likelihood of overheating is significantly reduced. Compliance with the necessary temperature regime will extend the service life of both the pyrolysis boiler itself and the entire heating system as a whole.

• energy independence

  The absence of components in the design that require power supply provides undeniable advantages for use in areas remote from power lines.

• presence of a FGP circuit

  In addition to performing its main function - space heating, the double-circuit pyrolysis boiler Burzhuy K is capable of producing hot water for sanitary needs.

• efficiency

  By using the principle of pyrolysis, high fuel efficiency is achieved. When the boiler is operating, a small amount of ash remains, and the gaseous waste consists almost entirely of water vapor.