Layout of baths with separate location of sink and steam room. Layout of baths with separate location of sink and steam room Turnkey 4x4 timber baths

Among the many bathhouse designs, the 4x4 size is one of the most popular. The point is the square shape of the structure and small size. At the same time, the bathhouse is spacious and functional. About how to build a 4x4 sauna with your own hands, the features of the project and its price in one article.

4x4 sauna made of rounded logs with a small terrace.

Typical bath plan 4x4 m

The 4x4 m bathhouse design is worthy of users' attention for its good capacity. A standard one-story building includes the following layout:

steam room, washing room, bathroom, dressing room and relaxation room or terrace under a common roof. The design of a 4x4 m bathhouse can be one-story or with an attic. Upstairs there is a full-fledged room for guests or for relaxation. Because of small sizes The box easily fits in a small summer cottage or near a private house.

You can assemble a 4x4 m bathhouse from timber, plain or rounded logs, bricks or cinder blocks. The simplest option is made from timber, since the correct shape of the structure and timber allows you to easily assemble the box with your own hands.

On a summer cottage, a project with an open or closed terrace is usually chosen. After taking the procedures, it’s nice to go out into the air and breathe. A common roof makes the terrace protected from wind and rain.

Main characteristics of a typical 4x4 m bathhouse design:

1. The area of ​​the foundation is 21.60 m2.
2. The area of ​​the interior is 11.50 m2 + 2.7 m2 terrace: steam room 4.14 m2, washing room 3.59 m2, terrace 2.7 m2, dressing room 3 m2. You can redesign the interior in your own way, so if you remove the terrace, the dressing room will become larger. Fit a full-fledged recreation room.

A 4x4 sauna can be purchased in a ready-made box or made independently. The easiest option is to buy turnkey, the price for this starts from 450,000 rubles. This is without finishing or insulation. For comparison, a ready-made box for assembly by yourself costs from 300,000 rubles. One of the 4x4 bathhouses can be seen in the video:

Construction of a bathhouse

The construction of a 4x4 bathhouse is carried out according to the selected project. You can compose it yourself or take a standard one, for example, in this article. All stages of construction include:

1. Installation and selection of foundation.
2. Construction of the box.
3. Roof.

Each of the stages can be done with your own hands. But if you don’t have the skill to assemble a bathhouse, you can reduce the cost of construction by preparing the foundation. In this case, the box is assembled by professionals. Let's consider all stages of assembly in more detail.

Foundation installation

The choice of foundation for a 4x4 bathhouse depends on the material from which it will be built:

1. Beam - lightweight strip foundation, columnar or pile.
2. Brick, blocks, logs - full-fledged strip foundation or monolithic.

Lightweight strip foundation for a bathhouse

The easiest way is to make a lightweight strip foundation. The choice of design depends on the level groundwater. If the bedding is high, then a pile or screw is used. We will look at a regular tape one.

To install it yourself, you need to choose a place for the bathhouse and make markings. A trench 50 cm deep will be dug along it, the bottom will be covered with a sand cushion. Formwork made of stainless steel is mounted on top edged boards and a reinforced frame is attached for strength. Next, the foundation is poured and left to stand. Don't forget to do it separately. It’s good if the finished foundation stands for more than 6 months, so it will fully mature and shrink.

Box assembly

Assembling a bathhouse box from timber

The bath box is assembled according to the plan. We will look at timber.

The first link of the bathhouse is laid on top of the foundation. The first link should be of a slightly larger cross-section, made of moisture-resistant wood. Aspen or larch is suitable. The price of the timber will be higher, but over time the bathhouse will not begin to rot. The fact is that wood is hygroscopic and water from the foundation easily rises up the timber. And there’s no need to talk about the combination of wood and water again.

The walls are assembled in stages. It is easier to use profiled timber; it is easily connected using a tongue and groove lock. A jute tape insulation is laid between each link.

The beams are connected to each other with wooden dowels. They can be made from scraps building material or buy ready-made ones. We do not recommend using iron connecting elements, over time the walls will dry out and the iron will become visible. The bathhouse will lose its aesthetic appearance.

If the bathhouse is assembled from ordinary timber or logs, then after assembling the box it is necessary to caulk the walls. Caulking is carried out along the perimeter of each row of logs. You can’t caulk first one wall and then the other, the bathhouse will warp.

Internal partitions are easier to assemble right away. Window and door openings do not need to be left; they are cut out at the very end of construction.

Bathhouse roof

Collect gable roof you can do it yourself.

The roof assembly for a 4x4 m bathhouse can be made from any comfortable material, even from jointed boards. The roof must be assembled clean or rough. A bathhouse assembled from chamber-drying material is immediately covered with a finished roof, natural humidity must stand for 1 year.

The roof structure for a 4x4 m bathhouse is suitable for a single-pitch or gable roof. It’s easier to assemble a lean-to with your own hands. It all depends on the owner’s imagination. Let's just say what simpler design, the more reliable the roof will be.

The top of the roof is covered with any material you like: corrugated sheets, slate, andulin, tiles. We have already talked about the advantages and disadvantages of these materials.

Interior decoration and landscaping.

A 4x4 m bathhouse can be easily decorated from the inside with any material you like. The square shape allows the use of all types: lining, imitation timber, ceramic tiles etc. Main requirements for material for interior decoration:

1. Environmental friendliness.
2. Fire resistance.
3. Easy to install.

The lining in the bathhouse is attached to the counter lathing, with foil insulation on top.

It is optimal to use linden or aspen lining. The lining is attached with your own hands to a sheathing made of timber with a cross-section of 40x40 mm. But first it is necessary to thermally insulate the walls of the steam room. For thermal insulation, mineral wool and ecowool are used. The inside of the steam room is lined with foil insulation. It will reflect steam and the thermal insulation will be higher. The ceiling of the bathhouse also needs to be insulated using sawdust, expanded clay or mineral wool.

Next, the stove is installed and removed chimney. For small bathhouse 4x4 m can be used to make both internal and external chimneys. The choice depends on the perseverance and experience of the owner. A low-power stove of 3.5–5 kW or a wood stove is suitable.

Price for a sauna

The price for building a 4x4 bathhouse depends on what kind of work the owner is willing to do with his own hands. For our readers, we present the average cost of work and materials in the form of a table; using it, it is easy to calculate how much a bathhouse will cost on average.

To save money, you can do some of the work yourself; the price will be significantly lower. You should not skimp on material and foundation. They must be reliable; if you do not have the skill to build a 4x4 m bathhouse with your own hands, we advise you to buy a ready-made box made of profiled timber. Even a beginner can assemble this with his own hands. But in general, the design of a 4x4 m bathhouse is quite budget-friendly and convenient for DIY construction.

Small country cottage area- a big problem for the owner. After all, on this land (usually three or six acres) you need to fit everything - and country house, and a barn, and a bathhouse. Modern architectural solutions make it possible to do this without any problems - for example, a bathhouse measuring 4 meters with your own hands will fit perfectly into the exterior of the site, without interfering with anything and fulfilling its health purpose.

You can build a compact bathhouse measuring 4 x 4 m without contacting construction organizations and the company, especially if it is frame-panel project. For a family of 3-4 people, 4 4 is optimal in terms of room area and number. The bathhouse will have a steam room (or room for a sauna), a dressing room (room for storing bath accessories, clothes and shoes), and a relaxation room.

A log structure is good for its traditional nature, but with the same external dimensions, the internal area of ​​​​the premises will be smaller (due to the diameter of the logs), and this is a big drawback for a bathhouse with dimensions of 3 by 4 or 4 x 4 meters. This property of a log structure must be taken into account when making calculations.

Some planning features:

1. It is more convenient to build a small bathhouse in such a way that the internal effective area was divided into two identical rooms: the first room will be used for relaxation after a steam room or sauna, and the second will be reserved for a steam room and a shower room with a toilet. Second large room divided into unequal parts: a larger area is allocated for the steam room;
2. You can save on size if you plan the heater near the wall in the recreation room, but the placement of the stove can be absolutely arbitrary, but in compliance with all fire safety requirements;

When designing a small bathhouse, you should be guided by the following features:

1. The entrance doors to the bathhouse can be located on any side of the building that is convenient for use, and depends mainly on the location of the interior;
2. It is better to place the entrance doors to the rest room, shower room and steam room taking into account free movement between them, and not close to each other;
3. The main thing is that the shower room is located next to the sewer entrance, which will make construction a little cheaper, and make the drain faster and more difficult to clog;
4. A small 4 by 4 bathhouse, the layout of which is shown in the figure above, must have a spacious (for 2-3 people) steam room, which means it must be larger than a shower room, since several people can steam in a steam room at once, while Only one person can enter the shower room;

The main thing about a compact bath

The simplest design of a bathhouse measuring 4 x 4 meters consists of one room, which simultaneously serves as a vestibule, a steam room, and a dressing room. It's quite inconvenient, but compact. A heater or electric stove is installed in any convenient corner of the steam room, and two or three shelves up to two meters long and up to half a meter wide are made in the room, and the bottom shelf is made wider than the top ones.

The figure below shows just such a project - it has only one large room, which is divided by a thin partition in order to retain steam in the steam room. The stove works for both rooms, but the hot part is located in the steam room.

This project does not have a porch, as it is designed for a minimal budget. But, if a porch is built, then it should direct a person into the vestibule, which will go into the dressing room. This measure will help to better retain heat in the bathhouse. You can store firewood and other sauna supplies in the dressing room.

The stove is made of red refractory brick, installed on a separate concrete foundation, and the inside walls are lined with fire-resistant materials. A thick steel sheet of metal – ≥10 mm – must be secured in front of the furnace door of the furnace.

The division of premises by area is done based on the expected number of visitors. Standard projects are based on traditional requirements: the shower room is made as small as possible, giving way to the steam room.

It is quite difficult to fit a terrace for a bathhouse measuring 3 x 4 or 4 x 4 meters into the design parameters of the building, since it takes up space from the remaining premises, and the project does not involve expanding the external dimensions of the building.

Internal planning of the bathhouse should be carried out taking into account the available free space and the people who will be able to steam and relax at the same time. Practice has shown that, for example, two people will feel comfortable in a steam room if its area is ≤ 6 m2, and for three people the area increases to 8 m2. The table shows data on the possible number of people depending on the size and area of ​​the bathhouse premises:

Premises	Seated position			Lying position		Seated position	Lying position
Number of persons	1	2	2	2 – 3	3	3 – 4	4
Steam room (dimensions in cm, area in m2)	85 x 115	115 x 115	115 x 180	130 x 180	140 x 180	150 x 180	150 x 200
Shower room	115 x 130	115 x 145	180 x 180	180 x 180	180 x 200	180 x 210	200 x 210
Waiting room	100 x 215	100 x 260	120 x 295	130 x 310	140 x 340	150 x 360	180 x 360
Sauna	215 x 215	215 x 260	295 x 300	310 x 310	320 x 340	330 x 360	360 x 380

The following tips can be given to floor lighting:

1. All lighting must be moisture-resistant;
2. The light from should not be direct.

Finishing facilities

Properties of wood for interior decoration of bathhouses:

Breed	Shrinkage, %		Strength of wood with 15% humidity, MPa (kgf/cm2)
	Radial	Tangent	Along the fiber	Bending	Skol
					Radial	Tangent
Coniferous wood
Pine	0,18	0,33	43,9	79,2	6,9 (68)	72,0 (73)
Spruce	0,14	0,24	42,3	79,4	52,0 (53)	52,0 (52)
Larch	0,22	0,40	51,1	97,2	8,3 (83)	72,0 (72)
Fir	0,9	0,33	33,7	51,9	4,7(47)	52,0 (53)
Deciduous hardwood
Oak	0,18	028	52,0	93,5	8,5 (85)	10,4 (104)
Ash	0,19	0,30	51,0	115,0	13,8 (138)	13,3 (133)
Shores	0,26	0,31	44,7	99,7	8,5 (85)	11,0 (110)
Maple	0,21	0,34	54,0	109,7	8,7 (87)	12,4 (124)
Elm	0,22	0,44	48,6	105,7	–	13,8 (138)
Elm	0,15	0,32	38,9	85,2	7,0 (70)	7,7 (77)
Deciduous softwood
Aspen	0,20	0,22	37,4	76,6	5,7 (57)	7,7 (77)
Linden	0,26	0,29	39,0	68,0	7,3 (73)	8 (80)
Black alder	0,16	0,23	36,8	69,2	–	–
Black aspen	0,16	0,21	35,1	60,0	5,8 (58)	7,4 (74)

The wood for the construction and decoration of the bathhouse was selected over years and decades, and the table you see above is based specifically on practical use wood in conditions high humidity and contrasting temperatures. The most suitable types of wood for bathhouses are larch, linden, cedar, and from “foreign” wood that does not grow in the Russian Federation - abashi. The standard and comfortable interior decoration of a bathhouse is lining, which is considered not only practical in terms of installation, but also environmentally friendly. When heated, the lining does not emit toxins or other substances harmful to humans. And if the carriage is made of the above-mentioned types of wood, then, when heated, it will release beneficial esters.

1. Linden - retains its yellowish color throughout its operation, regardless of humidity and temperature;
2. Abashi - almost does not conduct heat, always feels the same temperature to the touch, does not burn the skin. Uniform texture yellow color makes the room brighter;
3. Cedar – has healing properties, as stated ethnoscience, tolerant of high temperatures and humidity, except excretion essential oils, when heated, gives a pleasant smell of forest;

You should choose lining not only by its appearance - lumber Low quality can release resins when heated, and liquid resin that gets on the skin is a 100% burn. Therefore, specifically for finishing purposes, lining or boards with veins of resin are not allowed, while wood for the construction of a bathhouse frame may have such minor defects.

It is best to finish the ceiling with a tongue-and-groove board made of hardwood - there will definitely be no resin in it, and the multi-layer structure makes the material strong and durable. It is precisely because of the presence of resins that coniferous wood is not welcome when finishing the internal surfaces of any bathhouse.

This size is more relevant to large-scale projects, although it cannot be called popular among customers. But still, as an option, a 4x4 meter bathhouse is suitable for the average family of four people and not only that. Let's talk about the nuances of construction in more detail.

Despite the small dimensions, the spaciousness of the project inside makes you pay attention. The layout can be made on two floors (if possibilities allow). The steam room, washing area, dressing room and bathroom are located on the first level. The second floor is perfect for a relaxation room. A good scope of eight square meters. At the same time, on the site, a 4x4 meter bathhouse occupies a small area, the main thing is to choose the right place for construction.

Any materials are used, including timber of any processing, logs, bricks and blocks of varying densities. Wood stands out in terms of ecology, and of course, bathhouses built from wood are distinguished by their correct shape and natural beauty not requiring additional finishing. For suburban area A construction plan with an open or closed terrace will be acceptable. Protection from rain and wind will be provided by an external roof suspended from the general structure. Photo of a 4 by 4 bath on the left.

Main characteristics of the project

Deserves a little attention technical drafting plan. When creating a project, you must be guided by the following indicators when calculating the material and choosing a site for construction. Standard project baths measuring 4x4, has the following specifications:

• total area including the launch of the foundation 21.60 m2;
• The dimensions of the internal space are as follows: a steam room of 4.14 m2, a room for bath procedures - 3.59 m2, a dressing room of about 3 m2 and a terrace, subject to its location in the project, 2.7 m24
• the ceiling height, depending on the project (whether it be a bathhouse roof with a veranda or an ordinary one-story building), is not lower than two meters.

This standard sizes, used in most cases. If necessary, you can adjust the increase or decrease in the area of ​​any room yourself. Don't forget about the second floor. If such a project is envisaged, then a couple of squares from the first level count towards the flight of stairs. In this case, the dressing room is sacrificed, making the entrance to the second tier. It would be inappropriate to install a ladder, even in a washing room. Therefore, when designing premises, you will have to slightly reduce the size of all the premises.

Construction of a bathhouse

Having understood the project and the layout of the rooms, you can begin to develop a consistent construction plan. There are no deviations from the accepted rules here. A 4x4 meter bathhouse is a fairly large and heavy building, so the base must meet the characteristics. All types of bases can be used as options. A strip foundation will be reliable and practical. Considering that bathhouses of this size are being built extensively, it will be necessary to conduct a preliminary reconnaissance of the area for the possibility of laying a foundation below the soil freezing line. If there are no facts indicating the impossibility of bookmarking strip foundation, then you don’t have to try to adapt other structures to the bathhouse.

In the case of a high groundwater level, you will have to consider the option of installing screw piles or columnar foundation. In both cases, the foundation is laid below the freezing level of the soil. Such designs will cope with the task quite well. Depending on the type chosen, appropriate preparatory work is carried out, the base is installed, waterproofing and the surface is prepared for assembling the box or laying bricks, if the bathhouse will be built from this material.

Walling

When considering the option of assembling a log house from timber, you must first lay out the logs used for laying the first crown on the surface of the base. Although a brick bathhouse is no less practical, it is more difficult to build on your own. The material is marked, adjusted to size, and connecting recesses are prepared. After this, the timber is treated with a protective compound, laid in place and fixed in the corners. Additional fastening no need, the crowns will lie securely under own weight. Do not forget to pre-treat the entire surface of the foundation with a bituminous composition. Can be used roll materials, such as roofing felt or roofing felt. This is necessary to protect the first crown from moisture, the effect of which on the tree is not worth further describing.

After laying the first crown, the diagonal is checked and the remaining elements under the roof are laid step by step. The connection of subsequent rows is made with dowels. It is better to make them from the same type of wood that is used for masonry. Between each log, a jute seal is first laid, with a small allowance outward. After complete shrinkage, the remaining material is tucked into the cracks, sealing the joints. The base for the ceiling for the bathhouse is installed at the stage of installing the log house under the roof. On top of the last row of timber, transverse logs are installed from boards with a cross-section of 50x100 mm.

When assembling a bathhouse from rounded timber, you do not need to use a sealant. Special grooves created on the material during production allow each crown to fit as closely as possible to each other.

Particular attention is required to create internal partitions. You only need to delimit the bathhouse with one wall made of timber. It will separate the washing and steam compartments from the dressing room. They make a partition, together with the masonry of the crowns, cutting out landing recesses in the intended place for the transverse laying of the material. You can separate the steam room from the sink using a prefabricated structure. This is easier to do. In addition, additional cutting of logs can affect the strength of the log house walls.

Walls and windows

In a 4x4 bathhouse, it is necessary to make one window opening in the steam room and the dressing room. Sizes are selected according to location. You can make a window for a bathhouse with your own hands by first taking the dimensions. As an option, it is possible to install two vents in the steam room. In this case, the window can be designed in the washing compartment. This option is chosen at your discretion, but in any case, additional ventilation must be provided in the washing department so that the procedures do not create discomfort.

Bathhouse roof

Deserves special attention rafter system. When building a 4x4 bathhouse on two floors, avoid a complex structure that creates additional load on the base. You can use your imagination a little when building a one-story bathhouse. It is allowed to develop a hip structure, with the organization of a rest room in the attic. Any board can be used as a material. The option of splicing the material is not prohibited. You just need to purchase high-quality wood - this rule is effective for the construction of baths of any size.

IN constructively, the rafter system can be made in one or gable version. The main thing is to know all the features of building a roof for a bathhouse and follow the accepted rules. The first method, in terms of construction on our own more profitable. But a pitched roof is not conducive to arrangement attic space under the rest room. Any material can be used as a roofing covering, the main thing is that it does not burden the entire system. If necessary, you can reduce the angle of inclination to reduce the weight load on the rafters.

Interior decoration and landscaping

A complete flight of fancy. Depending on the chosen material, finishing can be done at the discretion of the owner. Profiled timber does not require additional finishing. The appearance of treated wood looks naturally beautiful. When laying a log house from untreated materials, it is allowed external finishing siding or brick. Inner space sheathed with clapboard, block house or other identical materials.

It is advisable to purchase linden or wood material from other hardwoods. The internal cladding of the walls in the bathhouse is made on a pre-assembled sheathing, with waterproofing laid inside. Wood, itself a material resistant to low temperatures, therefore, in regions with mild climates, you can refuse additional insulation.

Optional equipment

Having made a 4x4 bathhouse under the roof, before carrying out the internal Finishing work, it is necessary to mark the location of the output chimney. This is done after installation heating system. The large dimensions of the building allow the use of a heater stove here. You will first have to make a foundation for it, even at the stage of laying the foundation for the building. After installing the stove, a hole is cut in the wall for laying the chimney. The place is isolated with protective compounds. You can purchase a special adapter that protects the outlet from overheating.

Upon completion of all work, a sewer outlet is connected, electricity and water are supplied and you can start using the bathhouse.

The cost of building a log house 4x4 bathhouse without roof finishing is 211,000 rubles

• The foundation is support-column. 2 blocks per cabinet (for one-story houses) and 4 blocks in a cabinet on a cement screed (for houses with an attic). Concrete blocks, solid, size 200x200x400 mm. The cabinets are installed on a compacted sand bed. Sand (PGS) is provided by the customer.
• External walls - profiled timber of natural humidity with a section of 145x90 mm (wall thickness - 90mm) "block house" profile or straight.
• Total in the log house one-story baths– 16 crowns. There are 17 crowns in the log house of the baths with the attic.
• An open terrace (if any) on supports made of planed timber with a cross-section of 100*150 mm, with shrinkage jacks. The fencing is a handrail made of planed timber with a cross-section of 40*100 mm. Steps at the entrance.
• The clear ceiling height of the first floor (from the floor joist to the floor beam) for one-story baths is 2.15 m (+/-50mm); for baths with an attic 2.29 m (+/- 50 mm)
• The second floor is attic. Clear attic ceiling height (from floor beam to ceiling beam) – 2.25 m
• The height of the roof at the ridge for one-story baths is 1.20 m.
• The gables are a frame made of natural moisture boards with a section of 150*40 mm, 100*40 mm. Exterior decoration gables - lining (spruce/pine AB) 17*90 mm. Wind protection – NANOIZOL “A” (for buildings with an attic).
• In the gables one-story buildings a door (1 piece) and ventilation hatches (1 piece for each gable, under the ridge) are installed.
• In the gables of buildings with an attic, ventilation hatches are installed (3 pieces for each gable).
• Eaves and roof overhangs with a width of 200 mm (for one-story buildings) and 300 mm (for buildings with an attic). The cornices and overhangs are hemmed with clapboard (spruce/pine AB) 17*90 mm.
• Installation of window and doorways with a dressing crown, without installing casing bars.
• Assembly of a house/bath on the customer's site.

The price of a turnkey 4x4 bathhouse with a foundation and stove is 328,000 rubles

• The foundation is columnar. 2 blocks per cabinet (for one-story baths) and 4 blocks per cabinet on a cement screed (for baths with an attic). Concrete blocks, solid, size 200x200x400 mm. The cabinets are installed on a compacted sand bed. Sand (PGS) is provided by the customer.
• Waterproofing – roofing felt in one layer.
• The strapping is a beam of natural humidity with a cross-section of 150x100 mm. Along the outer perimeter the strapping is laid in two rows. The timber is treated with a protective compound.
• Floor joists - natural moisture board with a section of 40x150 mm per edge, with a pitch of 600 mm.
• The subfloor is a natural moisture board with a cross-section of 22x100mm. Steam, waterproofing – NANOIZOL S.
• Floor insulation – 100mm KNAUF/URSA mineral wool (or equivalent). Vapor barrier – NANOIZOL V.
• The finished floor of the first floor is dry tongue and groove batten(spruce/pine AB) 36mm thick. Every fifth board is fastened with self-tapping screws (for the possibility of re-upholstering the floors in the future).
• External walls - profiled timber of natural humidity with a section of 145x90 mm (wall thickness - 90mm) "block house" profile or straight. A total of 16 crowns (for one-story baths) and 17 crowns (for baths with an attic).
• The partitions of the first floor are profiled timber of natural humidity with a section of 145x90 mm, straight profile. They cut into external walls with a depth of up to 30mm.
• Inter-crown insulation – jute fabric 6mm thick
• Inter-crown connection - on a metal dowel (construction nail 6x200mm, 250mm).
• Gusset- “half a tree.” The outer corners of the log house are covered with clapboard (spruce/pine AB) 17*90 mm in two rows.
• An open terrace (if any) on supports made of planed timber with a cross-section of 100*150 mm, with shrinkage jacks. The fencing is a handrail made of planed timber with a cross-section of 40*100 mm filled with carved balusters. Steps at the entrance.
• The terrace floors are dry tongue-and-groove floorboards (spruce/pine AB) 36mm thick. They are attached with self-tapping screws to each board. The boards are laid in 5 mm increments.
• The terrace ceilings are lining (spruce/pine AB) 17*90 mm. Vapor barrier – NANOIZOL V.
• The clear ceiling height of the first floor (from floor to ceiling) is 2.10 m (+/- 50mm) for one-story bathhouses and 2.25 m (+/- 50mm) for bathhouses with an attic.
• The ceiling lining of the first floor (except for the steam room) is lining (spruce/pine AB) 12.8*88 mm. (joint for layout is allowed)
• The second floor is attic. Clear attic ceiling height (from floor to ceiling) – 2.20m
• Floor insulation – 100mm mineral wool KNAUF/URSA (or equivalent). Vapor barrier NANOIZOL V.
• The attic floors are dry tongue-and-groove floorboards (spruce/pine AB) 36mm thick. Every fifth board is fastened with self-tapping screws (for the possibility of re-upholstering the floors in the future).
• The cladding of the walls and ceiling of the attic is lining (spruce/pine AB) 12.5*88 mm (a joint for layout is allowed).
• Insulation of attic walls - 100mm basalt mats ROCKWOOL (or equivalent). Vapor barrier – NANOIZOL V.
• The attic partitions are a frame made of natural moisture timber with a cross-section of 40*75 mm, sheathed on both sides with clapboard (spruce/pine AB) 12.5*88 mm. The partitions are not insulated.
• Rafters - trusses made of natural moisture boards with a section of 150x40mm, 100x40mm. Installed in increments of 900-1000 mm.
• The gables are a frame made of natural moisture boards with a section of 150*40 mm, 100*40 mm. The external finishing of the gables is lining (spruce/pine AB) 17*90 mm. . Wind, moisture protection – NANOIZOL “A” (for baths with an attic).
• In the gables of one-story baths, a door (1 piece) and ventilation hatches (1 piece for each gable, under the ridge) are installed.
• Ventilation hatches are installed in the gables of bathhouses with an attic (3 pieces for each gable).
• The sheathing is a board of natural moisture with a cross-section of 22*100 mm, with a pitch of 300 mm. Counter-lattice - 20*40 mm slats, along the rafter slopes.
• Roof covering – ONDULIN (burgundy, brown, green) or galvanized corrugated sheeting. Under-roof vapor barrier – NANOIZOL S.
• Eaves and roof overhangs are 200 mm wide (for one-story baths) and 300 mm (for baths with an attic). The cornices and overhangs are hemmed with clapboard (spruce/pine AB) 17*90 mm.
• The staircase to the attic is single-flight, on strings made of planed timber with a cross-section of 145*90 mm. Floorboard steps. The handrail and fencing in the attic are planed timber with a cross-section of 40*100 mm.
• Finishing the walls and ceiling of the steam room - lining (aspen B) 14*90 mm (joint for layout is allowed). Reflective insulation on a foil base - NANOIZOL FB. Counter rail – 10*40 mm (ventilation gap – 10 mm). Before covering, the timber base of the walls is treated with a protective composition for baths and saunas NEOMID 200.
• Two-tier shelf made of planed boards (aspen B) 28*90 mm. Joint width – 40 cm (height – 50 cm); Lounger width – 60 cm (height – 110 cm).
• Installation of the ERMAK 12/ERMAK 16 stove with a hanging tank (stainless steel 35 l) for heating water.
• The base of the stove is brick in one row. Cutting the combustion portal - brick.
• Fire insulation - basalt cardboard, ceiling and roof passages, reflective screen made of smooth galvanized steel on basalt cardboard, flue sheet.
• The chimney is vertical, with outlet to the roof through the ceiling. Starting pipe - stainless steel 0.5 mm, stainless steel gate valve, stainless steel starting adapter, sandwich pipes 115 * 200 mm (stainless steel 0.5 mm * galvanized 0.5 mm), galvanized head.
• Installation in a washing room shower tray 800*800 mm with siphon. Exiting the drain outside the perimeter of the bathhouse - plumbing PVC pipe with a diameter of 50 mm.
• The windows are wooden, double glazed, with sealing and fittings (screw-in hinges, twist locks). Inward opening doors. Dimensions (h*w) 1200*1500 mm; 1200*1000 m; 1200*600 mm; 600*600 mm; 400*400 mm. Windows are installed in casing boxes.
• The entrance door is wooden, paneled, solid (spruce/pine A). Size (h*w) 1800*800 mm (for one-story baths; 2000*800 mm (for baths with an attic). Handles, hinges. On front door a padlock is installed.
• Interior doors – bath, frame (aspen A). Size (h*w) 1750*750 mm. Handles, hinges.
• Casing bars (swarms) are installed in window and door openings.
• Sealing of corners, joints, abutments - spruce/pine A/aspen AB plinth.
• Finishing windows, doors - spruce/pine frame A on both sides, aspen AB
• Nails for fastening parts are black construction nails.
• Nails for fastening the lining – galvanized 2.5x50 mm
• Nails for fastening plinths, layouts - finishing galvanized 1.8x50 mm.
• Loading, delivery up to 400 km from Pestovo, Novgorod region, unloading of a set of material.
• Assembly of the bathhouse at the customer's site.
• BONUS. Accessories for the steam room. Stones – gabbro-diabase 40 kg.

We have compiled for you a convenient table of differences in the configurations of bathhouses for shrinkage and turnkey.

CONSTRUCTIVE	SHRINKABLE	FULL CONSTRUCTION
Columnar foundation made of concrete blocks 200*200*400	Yes	Yes
Double strapping made of timber 150*100 mm	Yes	Yes
Floor joists made of boards 40*150 per edge with a pitch of 600 mm	Yes	Yes
Subfloor made of boards 22*100/150 mm	No	Yes
Floor insulation with hydro and vapor barrier	No	Yes
Finish floor – dry tongue-and-groove floorboard 36 mm	No	Yes
Walls and partitions made of profiled timber of natural moisture with a cross-section of 145*90 mm (wall thickness – 90mm)	Yes	Yes
Assembling a log house on steel dowels	Yes	Yes
Corner connection - half a tree	Yes	Yes
Intercrown insulation - jute	Yes	Yes
Rafters - trusses made of timber 40*100/150 mm with a pitch of 900/1000 mm	Yes	Yes
Sheathing – board 20*100/150 mm	Yes	Yes
Roof covering– ondulin / galvanized corrugated sheet C20	Yes	Yes
The eaves and roof overhangs are lined with spruce/pine AB clapboard	Yes	Yes
Window and door openings with a dressing crown, without installing casing bars	Yes	No
Window and door openings with installation of casing bars	No	Yes
Installation of windows and doors	No	Yes
Ceiling lining – spruce/pine lining AB	No	Yes
Insulation + vapor barrier of floors/attics	No	Yes
Finishing the walls and ceiling of the attic - spruce/pine lining AB	No	Yes
Finishing the walls and ceiling of the steam room - aspen lining AB + shelves	No	Yes
Installation of stove and chimney	No	Yes
Installation of a shower tray 800*800 mm with a siphon in a washing room. Exiting the drain outside the perimeter of the bathhouse	No	Yes
Stairs to the attic	No	Yes
Finishing: plinth, platbands	No	Yes
Loading a set of material, delivering it up to 400 km from our base, unloading at the customer’s site	Yes	Yes

Name	Cost, rub)	Unit
Construction of the foundation for screw piles or reinforced concrete foundation	8-921-930-69-80, 8-926-742-95-01
Decorative finishing plinth - pick-up ()	1000-1600	linear meters
Installation of reinforced concrete slabs 500*500*100 mm under the support pedestals ( )		PC.
Protection (backing board) of the first row of strapping made of larch boards 50*150 mm ( )		linear meters
Protection (backing board) of the first row of strapping made of larch boards 50*200 mm ( )		linear meters
Double strapping made of timber 150x150mm		linear meters
Double strapping made of timber 150x200mm		linear meters
Installation of floor joists made of timber 150x100mm		linear meters
Installation of larch floors decking boards"corduroy" (for open terraces)()	2000	m*2 floors
Installation of finished floors from tongue-and-groove larch floorboards 27 mm ( )	2000	m*2 floors
External walls made of profiled timber are moisture resistant with a cross-section of 145x140mm, partitions are made of profiled timber. humidity section 145*90 mm	2500	linear meters external walls
External walls and partitions made of kiln-dried profiled timber with a cross-section of 145x90 mm	2300	linear meters external walls And partitions
External walls made of profiled kiln-drying timber with a cross-section of 145x140 mm, partitions made of profiled kiln-dried timber with a cross-section of 145x90 mm	4000	linear meters of external walls
The outer walls are made of profiled timber. humidity with a cross section of 145x190mm, partitions made of profiled timber. humidity section 145*90 mm	4500	linear meters of external walls
External walls are made of profiled chamber-drying timber with a cross-section of 145x190 mm, partitions are made of profiled chamber-drying timber with a cross-section of 145*90 mm.	5300	linear meters of external walls
Set of kiln-dried lumber ( )	1000	m*2 building area
Pairing crowns with a wooden dowel	1000
Assembling a log house using a SPRING UNIT FORCE ( )	2000	linear meters external walls and partitions of the log house
Assembling a log frame with the height of the crowns tied with steel studs	1500	linear meters external walls and partitions of the log house
Corner groove-tenon connection ( warm corner)	6000	one corner of the log house
Corner connection “into the bowl” ( )	from 30 000	house kit
Inter-crown insulation – holofiber()	300/450/600	linear meter of external walls of the log house
Increase in ceiling height by 14cm (+ one crown in the log house)	500/750/1000	linear meters external walls and log partitions
Insulation 150mm		m*2 insulated area
The construction of a staircase on strings made of laminated veneer lumber, with wide steps, turned pillars, balusters and a figured handrail.	25000	PC.
Roof covering – metal tiles RAL 3005,5005,6005,7004, 7024,8017)		m*2 roof
Roof covering – corrugated sheeting with polymer coating(RAL 3005,5005,6005,7004, 7024,8017)		m*2 roof
Installation of a drainage system (PVC, DEKE)	1200	linear meters roof slope
Installation of corner snow barriers ( )		linear meters roof slope
Construction of tubular snow barriers ( )	1300	linear meters roof slope
Attic structure: sparse flooring made of edged boards along the ceiling beams, a door in one of the gables + a dormer window in the opposite gable		m*2 ceiling
External finishing of gables – house block spruce/pine AB 28*140		m*2 gable area
External finishing of gables - imitation timber 18*140 mm		m*2 gable area
Treatment of the entire building with fire-bioprotective composition NEOMID ( )		m*2 building area
Surface treatment with oil for terraces NEOMID ( )		m*2 floors
Treating the walls and ceiling of the steam room and washing room with NEOMID varnish “for baths and saunas” ( )		m*2 walls and ceiling
Treatment of the ends of the log house with NEOMID TOR PLUS ( )		opening/corner
Treatment of shelves in the steam room with NEOMID oil ( )	1000	m*2 shelf
Finishing walls and ceilings with washing lining made of larch 14*90mm ( )	1500	m*2 walls and ceiling
Installation of a “leaky floor” in a washing room ( )	5000	m*2 floors
Finishing with paired lining OSIN A, including shelves - OSIN A		m*2 walls and ceiling
Finishing with paired lining LIPA A, including shelves - LIPA A	1200	m*2 walls and ceiling
Finishing with paired lining LIPA EXTRA, including shelves - LIPA Extra more details more details)	35 000	PC.
Installation of PVC windows with single-chamber double-glazed windows	from 4000	PC.
Installation of PVC windows with double-glazed windows	from 5000	PC.
Installation of a heat exchanger in the ERMAK furnace, installation of a remote tank (stainless steel 60 l) on the wall of the washing room, water supply hot water metal-plastic pipes	20000	PC.
Installation of a tank (stainless steel 50 l) on a pipe above the stove, with a tap leading to the washing room	13 000	PC.
Installation of another ERMAK furnace (	12 000/16000	set
Chimney device made of stainless steel 0.8 mm thick (includes a protective screen and a stainless steel inlet sheet)	16 000/20000	set
Delivery over 400 km from Pestovo, Novgorod region.		km
Construction shed 2.0*3.0 / 4.0 m ()	from 21 000	PC.

The whole country rests on such workers

Alexey Gennadievich!!!

Due to lack of time, I couldn’t write to you - thank you very much for the work of your employees in building the bathhouse, two young men, unfortunately, I don’t know their names, they worked clearly and harmoniously, the quality of the bathhouse is EXCELLENT!!! The whole country rests on such workers. All friends and relatives also noted the impeccable work of the guys, which resulted in the bathhouse they dreamed of.

The guys built us an amazing bathhouse I would like to express my deep gratitude to Alexey (general director), Sergey Zorin and Vladimir Chistyakov (builders)! At the beginning of August, the guys built us a stunning bathhouse, taking into account all our wishes. The delivery of materials was carried out on time, the construction was completed even ahead of the time agreed upon earlier, the quality of materials and work was excellent top level

. In general, just a fairy tale! I advise you to build only with Russian carpenters!

"Price quality" The work is pleasing to the eye. Fast, high quality, on time. and high quality. All my wishes were taken into account.

I was very pleased with Alexey Roslov’s attitude towards his work. He always promptly and competently answered all my questions and resolved controversial issues. The team, despite the young age of the guys, worked quickly and smoothly, and at the end they gave advice on caring for the timber and preserving it for the winter. Next year I will do the finishing with the same team. "Russian Carpenters" wins in all respects compared to other large companies. “Price-quality” is about them. Thank you very much again. I will recommend it to everyone.

Functional

beautiful buildings

• on
• plot of land
• They delight the owners and provide the opportunity to use them all year round. Such buildings include 4 by 4 baths. A good size with average capacity. It can accommodate 3-4 people comfortably. These dimensions are suitable for families and entertaining guests. You can invite relatives and carry out procedures together.
• What should bath complexes be built from?
• Profiled timber is high-quality raw material. It has the following advantages: low thermal conductivity - this contributes to a long cooling process. Heat is stored for a long time, there will be no losses. various designs - there are square, rectangular and intricate solutions. You can build an irregularly shaped frame.
• quick assembly - experienced craftsmen complete the work in 2 weeks.
• slight shrinkage - gives the right to immediately use the object.
• decorative

appearance

steam rooms - does not require facade finishing. In this case, it is necessary to treat the wood with protection from moisture and fire. environmental friendliness - wood is a clean material. It allows the building to breathe. A healthy microclimate is created in a wooden structure. low prices - savings occur in comparison with logs. This construction will be cheaper if the contractor has his own production.