home Metal

Independent insulation of the walls of a frame house. How to properly insulate the walls of a frame house with mineral wool? Insulation of walls of a frame house with mineral

Frame houses are distinguished not only by practicality, but also by attractive external characteristics. This perfect option for those who want to acquire inexpensive but comfortable housing. Today we will talk about insulation frame house.

Do-it-yourself insulation of a frame house

Design Features

There are two main methods of constructing frame buildings:

frame-panel (buildings are assembled directly at the factory with ready-made elements);
frame-frame (all elements are prepared and assembled at the construction site).

In cross-section, the wall of a frame house looks like a multi-layer cake (this can be seen in the image above). It is also worth noting that the frames themselves can be of two types:

wooden;
metal.

For a long time wood was the main building material, and no wonder - it is cheap, durable, lightweight, easy to process and has excellent thermal conductivity. Metal structures are erected from perforated steel profiles, mostly galvanized (this extends the service life to one hundred years).

Now - directly to the process of insulating a frame house!

Stage one. Choosing a material for insulating a frame house

After the supporting structure is ready, you need to start thermal insulation, and here, of course, there are a lot of questions. And the main one is the choice of suitable material. There are quite a lot of them, but the most popular are polystyrene foam, basalt, eco- and glass wool, extruded polystyrene foam, materials that are sprayed or filled. It would seem that the choice is quite wide, but not all of the described insulation materials are suitable for a frame building.

For example, expanded polystyrene and polystyrene foam are not suitable because if they are tightly placed in the inter-frame voids, the structure itself will increase in volume in the future or shrink due to the natural properties of wood, which causes cracks to form between the thermal insulator and the frame. It is quite obvious that thermal energy will escape through these cracks, and the insulating material itself will no longer be effective. Therefore, a thermal insulator suitable for us must be elastic: even if the shape of the frame changes, there will still be no gaps, since the freed-up space will be filled with this material.

Now let's move on to specifics. Let's look at all the remaining materials, and you can decide for yourself which one is more suitable (in terms of price, quality, etc.).

Option #1. Basalt wool for insulating a frame house

Perhaps one of the most popular insulating materials. It has excellent noise and thermal insulation properties and is produced by melting rock basalt. For this reason, the material is sometimes called stone wool.

Note! The temperature it can withstand is +1000 C, so it is a real fireproof insulation.

The disadvantage of the material is that it absorbs moisture, which is why its main properties deteriorate over time. Therefore, when insulating a frame house, you should protect the basalt wool using vapor and waterproofing materials. We also note that for thermal insulation of walls it is necessary to use the material that is produced in slabs. It is advisable that there is a special marking on it indicating that it is for walls, otherwise after a couple of years the wool will shrink and cracks will form in the wall (namely in its upper part), through which cold air will penetrate.

Option #2. Ecowool

Modern material made from cellulose. It differs from the previous version not only in appearance, but also in installation technology. To insulate ecowool, you need a special machine to mix the material with water droplets; then this entire mixture is driven into the interframe space.

Droplets of water are here for a reason - they glue pieces of ecowool together, forming a monolithic thermal insulator along the entire perimeter of the building. Consequently, there cannot be any cold bridges in such walls. Although it is possible to install ecowool without using special equipment, that is, dry. In this case, it is simply poured between the layers of walls and carefully compacted.

Ecowool is immune to high humidity coming from the room, so there is no vapor barrier in in this case no need. The only drawback of the material is its high cost (not only it, but also installation work).

Option #3. Glass wool

Another very popular material that can be used in frame house. It differs from basalt wool in that it is made from molten glass. It is characterized by excellent thermal insulation properties, fire safety and the fact that no toxic substances are released when exposed to fire.

Note! Glass wool is often produced in rolls. You should pay attention to the fact that it must have markings for the walls (this is necessary for a frame-type house).

Option number 4. Bulk insulation materials

These include sawdust, expanded clay, slag, and the like. At one time, this technology was a great success, since it was quite difficult to get good insulating material. But today bulk materials are practically not used. Everything is explained quite simply: their common drawback is that over time they shrink, and their thermal insulation properties are very questionable.

Option #5. Glassine

Glassine is thick paper treated with bitumen. The material is often used in construction to protect against wind and moisture, although in reality this is not necessary - the material does not allow moisture to pass through, which comes from the room, and it accumulates in the frame itself.

Note! We do not consider spraying polyurethane foam, although it is very effective and can be applied to almost any surface. Firstly, it is afraid of direct sunlight, which reduces its service life by half. Secondly, its application requires special equipment, and this is not a cheap pleasure. We are talking about insulating a frame house, which in itself implies minimizing costs.

Video - How to insulate a house

Stage two. Preparatory activities

First we need to understand a number of important points, without which the thermal insulation of a frame building can easily turn into a waste of money. First, we note that you need to think not only about the walls, since both the ceiling and the floor can also let in cold air! In addition, the insulating material should be properly protected from moisture using internal/external waterproofing. Finally, when performing installation work, you need to leave small ventilation gaps between the walls and the insulation itself.

Before starting installation work, thoroughly clean all working surfaces from dirt and dust. If protruding screws or nails are found, remove them. And if there are gaps between the frame elements of the building, then blow them out polyurethane foam. Dry all damp areas (if any) using a hair dryer.

Note! If previously the outer surface of the walls was thermally insulated using waterproofing material, then its re-installation inside the building is no longer required, otherwise an excess amount of moisture will accumulate in the structure and, as a result, it will quickly collapse. Below are instructions for internal insulation only.

Stage three. Waterproofing layer

Let us immediately make a reservation that the installation technology for all materials is approximately the same. First, measure all the walls of the frame, then, in accordance with the calculations, cut strips of the material that was chosen for waterproofing. Attach the material to the posts using a stapler so that the frame is completely covered.

Stage four. Installing a vapor barrier layer

Even if moisture-resistant materials are used for insulation, vapor barrier must still be performed. At first glance, these are unnecessary expenses that can be completely avoided. But the fact is that inside the frame there will be not only insulation, but also other elements (for example, wood), which still need protection from steam penetrating into the walls from the room.

Scheme for laying a vapor barrier layer when insulating a frame house

Both a special film and foamed polyethylene can be used as a vapor barrier. Attach the selected material to the frame racks close to the thermal insulator using a mounting stapler. Sometimes insulation blocks are simply wrapped in this material, but in reality this is not necessary - as we just noted, protection must be provided for all frame elements without exception.

The material is laid with an overlap of at least 10 centimeters, and all joints are carefully sealed with high-quality double-sided tape. Also, do not forget the fact that the thickness of the vapor barrier material in no way affects the similar indicator of the insulating material.

Stage five. Installation of insulation

If mineral wool is used for thermal insulation, be sure to put on the protective equipment before starting work. personal protection– respirator, gloves, safety glasses, special clothing. If you use polystyrene foam (and this material, as we said, is not very suitable), then such safety measures are not needed. When insulating a frame house, lay the material evenly between the frame posts, not forgetting the ventilation gaps required between the thermal insulator and the sheathing. To cut mineral wool you can use scissors or an ordinary knife, but for polystyrene foam you will need electric jigsaw or a hacksaw with small teeth.

Note! Experts say that it is more effective to lay insulation in two layers. So, first there should be a first layer 10 centimeters thick, then a wooden sheathing is laid in a horizontal position, on top of which the second layer is laid (its thickness should already be 5 centimeters). This little “trick” will help avoid the formation of cold bridges.

Lay a protective film over the insulation (if it is necessary, that is, if the outside of the house was not properly insulated). This will ensure that the material will always be in a dry state, and moisture will not get in from the outside.

Note! For the ventilation gap, which has been mentioned more than once, fill wooden sheathing 3 centimeters thick.

After this, you can begin installing OSB boards and decorative trim.

Stage six. We sew up the walls in a frame house

The procedure for insulating a frame house is almost complete; all that remains is to sew up all the walls from the inside. OSB boards are often used for this, although you can also use sheets of plasterboard. Although we note that drywall is advisable only in the case of a fairly even frame, otherwise it will take on all forms of irregularities. On the contrary, OSB is much tougher, so it can be used to eliminate minor flaws. Start finishing on top of one of them.

Fastening OSB boards to the frame in the presence of a second floor

Two options for joining plates

About additional insulation

If what is described above is not enough, then you can additionally take care of external insulation (if, of course, it is not already present). If mineral wool was used inside, then lay a vapor barrier on the outside, which will protect the material from condensed moisture. By the way, it can be not only film, but also aluminum foil, although, to be honest, this material is not the best.

You can use the same OSB or plywood as wind protection. The finishing coating can be eurolining, siding or other suitable materials. That's all, good luck with your work and have a warm winter!

Video - Do-it-yourself insulation of a frame house

Many city residents, tired of the “comfort of high-rise buildings,” have a cherished dream - to someday become the owner of their own home in a suburban area. And if they manage to acquire a plot for construction, then the option is often chosen. This allows you to minimize both financial costs and construction time. In addition, a well-insulated frame house becomes a very comfortable home, designed for use at any time of the year. That is, it can be considered not as a summer dacha option, but as a full-fledged place of residence for the whole family.

The design of the walls of a frame house itself presupposes the presence of a thermal insulation layer, covered on both sides with continuous cladding. But with the floor it can be somewhat more complicated, since its structure may vary. This depends on the type of foundation of the building, the climate zone, and the preferences of the owners. But in any case, the thermal insulation layer should minimize heat loss and create conditions for comfortable living in the house at any time of the year.

Let's see how you can insulate the floor in a frame house.

Dependence of the floor insulation system on the type of foundation

One of the distinctive features of a frame building is its lightness of construction. And this, in turn, means that its construction does not require a powerful, material-intensive foundation. It is quite possible to get by with a columnar foundation, a pile foundation or a shallow strip foundation.

In areas with dense, stable soils that are not prone to swelling, and during construction, not too big house It is quite possible to get by with a columnar foundation. Supports are placed along the perimeter of the building with a certain spacing, as well as intermediate ones - under the internal partitions and at the points of their intersection or with an even distribution over the area of the building. After a layer of waterproofing, a frame of frame beams and load-bearing floor beams of the first floor are laid on the pillars. They, in turn, become the basis for securing the joists for subsequent flooring.

The floor thermal insulation system is precisely located in the space between the trim, beams and joists. Thus, the floor itself will not come into contact with the ground.

If the soil on the site is waterlogged, unstable, or unstable, then pillars will not work. This suggests the solution to constructing a pile foundation. Despite some external similarity with the columnar one, this is a slightly different design. Piles must be buried until they rest securely in stable, dense layers of soil below the freezing level.

Such foundations also become a good solution if the site is located on rough terrain and has a significant difference in the building area. The easiest way to solve this problem is to use piles that can be cut off exactly in one horizontal plane after screwing in.

As is probably already clear, insulation of the floor of the first floor in this case is carried out in approximately the same way as with columnar foundation. That is, it will be a “hanging” structure, not in contact with the ground, with a ventilated space below.

Finally, you can use the universal scheme of a strip shallow foundation. Such a foundation for further construction does not require excessively high costs, and any owner should be able to fill it, of course, if he adheres to all technological recommendations.

And when strip foundation Several options for creating an insulated floor on the first floor are already possible.

For example, the same structure of a multi-layer wooden floor is used as with a pile or columnar foundation. The reinforced concrete strip and the beam of the bottom trim of the “frame” laid on it become the basis for securing beams and joists. That is, the principle of further insulation does not undergo any special changes. And to ensure air circulation in the underground space (which is necessary to avoid stagnation and dampness, leading to rapid decomposition of wood), ventilation ducts are left in the foundation strip. One of them is exactly shown in the illustration above.

Another option: you can make insulated floors directly on the ground. Here, the approaches can also be different, both in the number of layers of the structure being created, and in the choice of the main one (sometimes also the auxiliary one). Below, these options will be considered.

In short, the order of work and the arrangement scheme in this case are practically no different from the usual insulation of floors on the ground. True, options are possible here too.

So, the finishing coating can be laid directly on an insulated floor, closed and finally leveled with a cement-sand screed (or self-leveling composition).

If we act differently, the screed becomes the basis for securing the joists on which the plank floor or sheet covering (plywood or OSB) is laid. With this option, you can supplement the thermal insulation system with insulation laid between the logs.

Thermal insulation materials used for floor insulation

The modern variety of thermal insulation materials is extremely wide. A private developer has the opportunity to select insulation taking into account the specifics of its application, existing advantages and disadvantages, the cost of the material and the degree of complexity of working with it.

Let's consider several insulation materials suitable for thermal insulation of floors during frame construction.

Expanded clay

This material is one of the most accessible. Thanks to a large number of positive features, it is one of the leaders in demand for floor insulation. This is especially true for floors on the ground.

In addition to expanded clay, other mineral expanded insulation materials are also produced. These are perlite and vermiculite. Their thermal insulation qualities are even higher. But the high cost still limits their use for insulating the floors of the first floor.

Mineral wool

It is also a very popular insulation material made from various mineral raw materials. In individual construction, two types of it are usually used - glass wool and basalt (stone) wool.

The manufacturing process for both types is almost the same. From the melt quartz sand and glass waste or rocks of the gabbro-basalt group (for glass wool and stone wool, respectively), thin fibers are formed, which are then pressed into mats and bonded with special adhesive compounds. This is followed by the process of final molding, cutting - and the output is finished insulation material in the form of blocks standard size of different thicknesses or in the form of long mats rolled into rolls.

Both materials, if they are truly manufactured in compliance with the technology, are distinguished by high thermal insulation characteristics. Thus, their thermal conductivity coefficient is usually in the range from 0.038 to 0.05 W/m×K, depending on the density of the material.

In addition to insulating qualities, merits mineral wool include the following:

The material is usually very light, and its use will not overload, for example, the structure of a “hanging” floor on joists. Working with it is simple and straightforward and does not require special qualifications.
Mineral wool is also valuable because it has almost zero flammability.
Blocks and mats have plasticity and elasticity. They are very convenient to place between structural elements (in our case, beams or joists). After being compressed during installation, they try to straighten out, thereby fitting very tightly to the frame parts, leaving no voids.

Modern types of mineral wool are designed for very long service life as part of insulation systems, amounting to tens of years. The material is not subject to biological or chemical decomposition, and is not afraid of any temperature changes, even theoretically possible when operating the field in the most extreme conditions.
The cost can be called quite moderate. Glass wool is usually somewhat cheaper than its basalt counterpart.

Mineral wool also has its disadvantages. True, they can be expressed in different ways, and practically do not apply to some modern types of material at all.

So, mineral wool does not like exposure to water. When wet, it sharply loses its insulating qualities. Therefore, the design of the insulation system must provide both waterproofing and the possibility of free evaporation of moisture.

True, manufacturers are trying to give modern types of mineral wool increased hydrophobicity. Thus, some types of material, even in full contact with water, have extremely low hygroscopicity, tending to zero. It is a pity that the cost of such materials is still very high.

The second negative quality is the fragility of the fibers. It is more characteristic of glass wool - basalt fibers are much more plastic.

This leads to gradual caking of the insulating layer with loss of thermal insulation qualities, especially if the structure is subject to vibration loads. The fragility of thin fibers also complicates the installation of insulation - it is necessary to protect the skin, eyes, and respiratory organs. In addition, it is necessary to provide a barrier so that small particles of mineral wool do not penetrate into the room during the operation of the house.

But again, modern types of mineral wool (especially basalt) suffer from this drawback, if at all, then in a very unexpressed form. Processing of fibers using special technologies makes them very flexible and durable. And these types of mineral wool are more reminiscent of classic felt. Working with them is much more convenient and safer. And during operation, the phenomenon of caking is simply absent.

Finally, one cannot discount the fact that many types of mineral wool during the production process are treated with binders based on phenol-formaldehyde resins. And the emission of phenol is a very unfavorable matter for residential premises.

They are also trying to get away from the use of phenol-formaldehydes. Many types of mineral wool have such low emissions that they are quite acceptable for any residential premises. In general, there is a tendency towards a complete abandonment of it - in favor of acrylic resins. This kind of mineral wool can be considered completely environmentally friendly and safe. True, the question of its rather high cost at the moment again arises.

What qualities does mineral wool have?

Insulation with this material will be completely justified if truly high-quality products are used. Unfortunately, in this segment of the building materials market there are a lot of low-quality goods. What should modern high-quality mineral wool be like? Well, for example, such as . And among materials based on glass fibers, glass fibers traditionally occupy leading positions.

Insulation based on polystyrene

And this is a group of rigid insulation materials produced in the form of blocks of clear geometric dimensions. Given the common raw materials, different production technologies predetermine two main types of such insulation materials.

Ordinary white polystyrene foam (PSB) is a combination of air-filled granules-balls glued together. The material is characterized by its low cost, general availability, and very high insulating qualities. But in terms of strength, durability, and a number of other characteristics, it is significantly inferior to its “brother” - extruded polystyrene foam.

Extruded polystyrene foam (EPS) has greater rigidity at approximately the same density. Its structure is completely different: it is a collection of tiny gas-filled cells. So the insulating qualities are also somewhat higher (approximately 0.032÷0.035 W/m×K versus 0.04÷0.042 for white foam).

In addition, if the offered assortment of EPS is dominated by products from well-known manufacturers (for example, Penoplex), then white foam plastic is produced in large quantities anywhere. Anything complicated technological equipment is not required, and therefore many workshops operate semi-handicraft. And in such conditions, there is no need to talk about compliance not only with GOST, but even with some vague specifications, or with professional quality control.

So if a choice is made in favor, let it be at least its extruded version. Yes, the cost is higher, but the level of quality is completely different.

However, both materials have one very important negative feature, which forces one to be especially careful when choosing such insulation for a residential building. Let’s even leave aside the environmental friendliness of the material - not all is well here either. The question is about the safety of the material in case of fire.

White foam plastic is simply highly flammable, no matter how much they say to the contrary. When burning, it begins to melt, and also becomes a distributor of “liquid fire”. Manufacturers of extruded material have tried to reduce the severity of this problem - EPS is less likely to ignite and has a tendency to self-extinguish.

But that’s not the main thing. When burning (thermal decomposition) of polystyrene in any form of release, extremely toxic gases are formed. Literally a few breaths can lead to serious poisoning, damage to the respiratory system and central nervous system. The danger is literally mortal. So you should think again before “allowing” polystyrene foam insulation into your residential building.

However, if floors are insulated along the ground, then why not? Completely enclosed with a concrete screed, the same extruded polystyrene foam will be safe from the point of view of flammability. But it will fully retain its outstanding insulating qualities.

Other types of insulation.

Just a few words about other thermal insulation materials, which can also be used when insulating a frame house. They are not so popular and well-known, but it doesn’t hurt to know about them.

Ecowool- relatively new material, obtained from cellulose fibers by special processing. It can be poured into cavities in dry form, or applied “wet” using special equipment.

It must be said that opinions on its use are still contradictory. It is “raised to the skies” for its environmental friendliness and high thermal insulation qualities (thermal conductivity coefficient is comparable to mineral wool), and are mercilessly criticized for their tendency to caking and lack of outstanding durability. The truth, apparently, is somewhere in the middle. It has not yet passed the test of time - the material appeared in free circulation not so long ago.

Without a doubt, one of the most effective insulation materials. Shows excellent thermal insulation qualities - the thermal conductivity coefficient is even less than 0.030 W/m×K. The technology of its spraying allows you to fill all the smallest cracks and cavities without leaving cold bridges. In the absence of exposure to ultraviolet radiation, excellent durability. Quite high resistance to fire, and does not emit highly toxic compounds during thermal decomposition.

There are two significant shortcomings, and they are interconnected. The first is the need for special equipment and raw materials for spraying polyurethane foam. And this limits the ability to carry out work independently. Well, the second, which follows from the first, is that the cost of such insulation will be quite considerable. It's worth it though.

These are the “relatives” of polyurethane foam. Very good combination two factors. The first is the highest insulating qualities, even higher than that of polyurethane foam (thermal conductivity coefficient reaches 0.024 W/m×K). And the second is ease of installation, characteristic of rigid insulation boards of the polystyrene group.

There are no words, there is certainly a great future for such insulation materials. But so far their use remains very limited - simply because of their high cost. The material has not yet “migrated” to the category of publicly available.

There are also more “exotic” insulation materials. Thus, people are increasingly turning their attention to foam glass. It is clear that with issues of environmental cleanliness and fire safety There are no complaints here at all. Thermal insulation indicators – on high level. But for the floors of a frame house, the material is not so convenient for installation. And the price for it is still considerable.

Cork agglomerate slabs are an excellent insulation material. But again, the high cost stops us. The same can be said about thermal insulation mats based on other plant bases - flax, coconut, hemp.

By the way, some builders generally prefer to act “the old fashioned way.” That is, use ordinary sawdust as insulation, poured between the lags. Naturally, after carrying out their appropriate antiseptic treatment. It was with sawdust, dry leaves, moss, and pine needles that our near ancestors once everywhere insulated their homes. But if this option is chosen, then it is better not to act on your own initiative - turn to good master who understands these issues. Otherwise, you may not achieve the desired result - there are a lot of professional subtleties here.

Insulation of a wooden floor of a frame house

Basic insulation schemes

This is the most common option. It is used on all types of foundations. The technology fully complies with the very principle of creating a frame structure of a building.

Otherwise, this technology is called rough insulation wooden floor. And this name practically reveals the whole “secret” of creating a thermal insulation layer.

There can be many options here. But circuit diagram approximately remains the same, with some nuances.

Here is one of the typical schemes.

The basis for the entire structure of the insulated floor are floor beams or powerful logs (item 1). When choosing the section of a board or timber for their manufacture, you must immediately take into account the thickness of the required thermal insulation material. The thickness of the insulation will be discussed below.

Of course, all wooden parts must undergo appropriate treatment with an antiseptic composition. It is clear that such preparation of wood for frame construction should be applied a priori. But there will be additional details that also need processing no less.

Along the entire length of the logs (beams), on both sides, flush with their lower edge, cranial bars (item 2) with a cross-section of approximately 40x40 or 50x50 mm are packed. These bars become the support for laying the subfloor (item 3). For this flooring, boards approximately 20 mm thick are used. Sometimes such flooring is made from solid strips cut from OSB sheets with a thickness of at least 12-15 mm. Boards, of course, are preferable, but sheet material speeds up the operation.

The next step is laying waterproofing material. (item 4). Moisture should not be given a chance to penetrate into the insulation from below. But, at the same time, this layer should not interfere with the free escape of water vapor. That is, to allow the insulation to “breathe,” thereby getting rid of excess moisture so that it does not go into the liquid phase during condensation due to temperature changes. Therefore, it is best to use a vapor-permeable membrane here. It is easy to secure the membrane to beams and boards - with staples using a stapler.

Pay attention to how this membrane is laid - the joists (floor beams) remain “outside”. This is another measure aimed at preventing overmoistening of wooden parts that perform load-bearing functions - they will be freely ventilated.

The selected insulation material (item 5) is placed (scattered) into the “sections” formed between the joists. As already mentioned, it should fit as tightly as possible to the frame parts. There are no problems with mineral wool, due to its elasticity. If rigid insulation boards are installed, for example, made of extruded polystyrene foam, then it is usually difficult to avoid gaps. Therefore, after laying them, you have to fill all the cracks and gaps with polyurethane foam.

By the way, when using penoplex, you can do without the lower membrane. The material itself is vapor-tight and does not absorb moisture.

A waterproofing layer is spread on top of the insulation (item 6). But here there can be no talk of any kind of vapor permeability. On the contrary, complete vapor barrier of the insulation is important. The fact is that the humidity in a living room during the cold season is always much higher than outside. That is, vapors will tend to penetrate through the enclosing structure to the outside. And if they are not blocked, they will penetrate into the insulation, where condensation awaits them at the “dew point” - a transition to a liquid state of aggregation. And this border will exactly fall on the insulation. And if it begins to actively get wet, then all its insulating qualities will disappear.

Thus, vapor barrier is important here. Moreover, it is hermetically sealed, with gluing of the overlaps of adjacent strips. We must not forget that water accidentally spilled or applied on feet from the street can seep through the floor into the insulation from above.

And finally, if necessary, the selected finishing floor covering (item 8) can be laid over boards or plywood flooring.

Now about some nuances that can slightly change the shown diagram.

You can save some money on subfloor boards. This is not just about the fact that low grade lumber is often used. It’s just that the boards are often installed sparsely, as shown in the illustration.

In principle, the necessary ventilation of the insulation will only benefit from this. The main thing is that the thermal insulation material itself is securely fixed and does not try to crawl out through the cracks. And with the use of rigid insulating boards, this option generally arises by itself.

But do not forget that with this approach, the subfloor is completely excluded from the overall insulation system. But even a 20 mm thick board has good resistance to heat transfer. That is, this will need to be taken into account in the calculations.

Instead of cranial bars, a support board with a cross-section of, say, 150×25 mm can be fixed to the lower end side of the beams or joists. This is somewhat faster in execution and provides one important advantage. Specifically, the height of the beam is more fully used for laying insulation (and a very thick layer is often required). Like it or not, a cranial block of 50 mm of this height eats up. With a persistent board there are no such losses.

True, you will most likely have to fix such support boards even before installing beams or joists. Otherwise, you may not be able to crawl up from below. And since during operation the force will be applied to pulling out the fastening elements, the fastening of these boards must be approached with special care. For example, use powerful screws or rough nails.

Next point. Experts advise leaving a ventilation gap between the insulation covered with waterproofing and the upper plank flooring. This will help prevent moisture from accumulating here. And the floorboards will be ventilated on both sides, which increases the durability of the wood.

Clearance, of course, can be ensured by laying insulation not under the very top edge of the joists. But it’s even better to simply nail a beam along the joists, with a width equal to the width of the joists and a height of 25÷40 mm. It will press the water vapor barrier film well and set the required ventilation clearance.

By the way, another benefit can be derived from such a raised floor - placing utility lines in this space, if necessary.

Another option. The supporting beams remain completely open on three sides. And the subfloor (plank or sheet material) is laid directly on them. After this, the lags are installed, which are located perpendicular to the beams.

Well, then - the insulation continues according to the same plan, with the laying of thermal insulation material between the Advantage - the load-bearing beams are almost completely effectively ventilated, which affects their durability. Disadvantage - the design is more bulky in height.

By the way, sometimes the thickness of the insulation is such that it is necessary to use both the height of the beams and the height of the logs perpendicularly installed on them.

With this insulation scheme, the top layer of thermal insulation is laid perpendicular to the bottom. And this completely blocks possible cold bridges.

Video: Insulating the floor of a frame house on a pile foundation with Knauf mineral wool

If clarity has been achieved with the schemes and the order of their implementation, then it’s time to move on to another very important issue. Specifically, what should be the thickness of thermal insulation?

What layer of insulation will provide effective thermal insulation of the floor?

You can't do without calculations here. And they are based on the principle that the total thermal resistance of the floor must be at least not lower than the established standardized value determined for a specific region, taking into account its climatic conditions.

Where do you get this value from? You can check with your local construction organization. Or use the proposed map scheme.

Please note that for each region there are three such values shown. In this case, we are interested in only one thing - for floors (the values are signed with blue numbers).

The total value of this resistance is the sum of the resistances of each of the layers of the structure. In this case, they could be:

A subfloor layer, but only if it is made solid, without cracks. If it is made sparse (or it simply does not exist, and this also happens), it is excluded from the calculations.
A layer of insulating material.
A layer of plank or sheet covering on top of the joists.

The remaining layers can be ignored (for example, finishing coating such as linoleum, laminate, ceramic tiles etc.) Either their thickness is too small to have any significant effect on the overall thermal resistance, or the thermal conductivity is too high.

So, the planned structure of the floor and the type of insulation chosen are known. The values of thermal conductivity coefficients of materials are no secret. This means that using thermotechnical formulas it is possible to calculate what thickness of insulation will bring the total thermal resistance to a standardized value.

We won’t give the formula; it’s better to suggest that readers use a special online calculator.

To achieve a comfortable stay in the house during winter period it is necessary to think about insulation at the construction stage. This will prevent cold air from entering the room and ensure compliance with temperature and humidity conditions. You can do the insulation of a frame house yourself. Step-by-step instruction for each type of structure is given below.

Why is it necessary to insulate a house?

Using thermal protection of structures in contact with cold air, the following problems can be solved:

condensation from inside the premises;
the appearance of dampness, mold and mildew;
increased heating costs;
non-compliance temperature regime living space and a decrease in the comfort of living in it.

In addition, competent technology for insulating a frame house can extend the service life of the main structures of the building.

Materials for thermal protection

House insulation can be carried out using the following materials:

mineral wool;
extruded polystyrene foam;

Types of mineral wool

There are two classifications of this insulation. The first is based on the raw materials used for manufacturing:

basalt;
glass;
slag.

The most popular is the insulation of the walls of a frame house and other structures with basalt mineral wool.

The second classification is based on the form of insulation:

rigid slabs;
roll material.

It is worth noting that glass wool is only available in rolls.

For floors, rigid slabs that can withstand fairly high loads are suitable. Insulation of the walls of a frame house can be done using both slabs and rolls. For attic roofing, it is best to use slab material. This will allow you to easily install mineral wool insulation between the rafters.

Insulated frame house structures

Before insulating a frame house, you need to decide which structures require this additional measure.

You can protect the following building elements from the cold with your own hands:

first floor floor;
attic floor (if the attic is cold);
attic roof;
exterior walls.

Do-it-yourself insulation work can be done both outside and inside. It is best to install thermal insulation between the studs, as this will ensure competent work material. Insulation wooden house applying mineral wool from the inside of the wall will greatly simplify the work and allow events to be carried out in any weather conditions.

Double-layer insulation – guarantee of 100% thermal protection

An insulation scheme from the outside is possible if the insulation from the inside is not sufficient and additional insulation is required. Peculiarities:

outer thermal insulation material should not create a barrier to steam. Otherwise, the resulting condensation from water vapor will accumulate between two layers of insulation, which is fraught with the formation of mold and mildew;
thickening the house wall

Based on all of the above, it follows that thermal protection of a wooden house from the outside with mineral wool should be carried out only in exceptional cases when the scheme from the inside is not applicable.

Wall insulation

Double-layer insulation (double frame)

To guarantee a comfortable stay during the winter period, it is important to take care of the thermal protection of the walls. To reliably insulate walls with basalt or other wool from the outside with your own hands, you need two-layer insulation. Adhere to the following layer order:

interior decoration;
vapor barrier;
insulation with mineral wool (2 layers with offset racks);
windproof membrane;
OSB-3 for sheathing;
external finishing of the facade.

It is important to remember that the scheme for using this type of insulation requires mandatory availability a ventilated layer with a thickness of at least 4 cm. This is necessary due to the high hygroscopicity of the material. In order for the insulation to maintain its performance characteristics, it is necessary to remove excess moisture from its surface. This is ensured by the circulation of cold air outside the surface of the mineral wool.

Most often, the technology for insulating the walls of a frame house is the following scheme: the material is not laid on any side, but between the frame posts. This allows you to reduce the overall thickness of the wall and significantly reduce the construction time of the building. Mineral wool is fixed between the frame posts, after which sheathing is done on both sides.

When carrying out DIY work, vapor barrier and wind protection are positioned similarly to the previous cases: steam protection is on the inside, and wind protection is on the outside.

When thermally protecting walls from the inside under a curtain wall, the order of layers is as follows:

interior decoration;
vapor barrier;
mineral wool;
superdiffusion membrane;
wall design;
façade finishing.

Insulation of floors

A wooden frame house is characterized by ceiling beams. When arranging thermal insulation with your own hands, insulation boards are laid between load-bearing structures ceilings You can also use rolled materials, but spreading them will require preliminary installation of the bottom sheathing or continuous flooring.

When insulating with mineral wool in the form of rigid slabs, the step wooden beams It is better to take the ceilings so that there is a clear gap of 580 mm between them.

This will ensure maximum ease of working with 600 mm wide slabs and complete filling of the space with heat-insulating material.

Insulation When doing things with your own hands, you need to remember that the vapor barrier is located from the inside of the room, and the waterproofing is on the cold air side. In the case of interfloor ceilings, protection from steam should be provided from the ceiling.

attic floor

It is also important to remember that when working with any type of mineral wool, it is better to prevent particles of the material from getting on your skin and into your lungs. For this, it is best to use gloves and a mask. Workers must also have special clothing that completely covers their arms and legs.

Insulation of pitched roofs The DIY installation technology is similar to ceilings.

The pitch of the rafters, as in the previous case, is selected to maintain a clear distance of 580 mm.

The work is performed in the following order:
installation of the rafter system;
laying a waterproofing layer on top of the rafters;
thermal insulation;
installation of vapor barrier;
top and bottom sheathing;
laying roofing material;

interior ceiling decoration.

Preparatory work

Before properly insulating a frame house, it is necessary to prepare the surfaces. To do this, follow simple steps:
treating all wooden house structures with antiseptic compounds to prevent damage by various microorganisms;
cleaning the surface from dirt and dust;

elimination of significant irregularities.

These simple do-it-yourself manipulations will ensure that the insulation is securely attached to the structures and has the longest possible service life.

To do this, the surface of the walls of the house, both outside and inside, is covered with a vapor barrier film, and then the resulting cake is supplemented with a layer of plasterboard or lining. Thus insulation frame walls

DIY process occurs in several stages, as required by the technology. The resulting pie can be saturated from the inside with extruded polystyrene foam and mineral wool.

After the insulation has been installed outside with your own hands, it is best to cover the outer layer with polystyrene foam or cotton wool, and put a windproof membrane on top, which can be secured with a stapler.

The resulting insulation cake of the frame structure is covered with lathing on the outside; it is needed to hold the insulation as in the case.

It is best to make the lathing yourself from a material such as wood. The sheathing will not only hold the insulation, but will also form a ventilation gap inside the frame facade, which will be located between the membrane and the sheathing located outside.

The insulation of a frame structure can be carried out either with polystyrene foam or with mineral wool. In order to insulate the surface of a frame house, you can use not only foam plastic or cotton wool, but also choose an alternative material for insulation

2 Types of mineral wool for insulating a frame house

Before choosing mineral wool for insulation, you need to familiarize yourself with its main types, their features and characteristics. Now wool for insulation has three varieties, these are:

Glass wool;
Slag;
Stone (basalt) wool.

If you are going to choose glass wool to insulate a frame structure, then keep in mind that the thickness of its fibers is 5-15 microns with a length of 15-50 mm.

Thanks to such fibers, glass wool is quite elastic and durable. When insulating walls using glass wool, you should take care in advance of the availability of personal protective equipment - gloves, thick overalls and a respirator. Mineral wool made using fiberglass will differ:

The thermal conductivity coefficient is 0.052 watts per meter per Kelvin as at;
Permissible heating temperature of +500 degrees Celsius;
The permissible cooling temperature is -60 degrees Celsius.

Slag wool is made using blast furnace slag. The thickness of its fibers can reach 12 microns, with a length of 16 mm.

Due to the fact that slags have residual acidity, being in a damp room, they can affect metal surfaces with a high degree of aggressiveness.

Slag wool has a tendency to absorb excessive moisture. Because of this, it is not very well suited for providing thermal insulation for the facades of frame buildings.

The material has a high degree of fragility, therefore, if you pick it up in your hands, it will prick. The thermal conductivity coefficient of this substance is 0.48 watts per meter per Kelvin, and the maximum permissible heating temperature is +300 degrees Celsius.

The level of hygroscopicity of slag wool is quite high and this is an example. Stone wool has approximately the same fibers as slag wool.

However, compared to polystyrene foam, it has several undeniable advantages. The fibers of stone (basalt) wool do not prick, so it is quite safe to work with it.

The thermal conductivity coefficient of basalt wool is up to 0.12 watts, at a maximum heating temperature of +600 degrees Celsius. Basalt wool is made using diabase, but the structure of this insulation also contains substances such as:

Clay;
Limestone;
Dolomite.

Basalt wool also contains formaldehyde resins. As the volume of such substances decreases, the material becomes less resistant to moisture, but at the same time the likelihood of evaporation harmful substances decreases significantly.

Basalt wool is also characterized by the fact that it does not contain additional elements. This insulation is capable of withstanding a temperature increase of +1000 degrees Celsius, with a maximum cooling threshold of up to -190 degrees.

Fiber made from basalt wool is in most cases presented in the form of rolls, and sheet material is convenient for filling mats. The flammability of this substance is minimal; the fibers do not catch fire, but only melt.

2.1 Which cotton wool is most suitable?

Any of the modifications of the presented insulation is highly hygroscopic. Therefore, if moisture gets behind the surface of the frame sheathing, mineral wool immediately loses all its thermal insulation benefits.

In this case, it becomes wet and caking, as during application. A section of the wall becomes open and cold air begins to flow through it.

To avoid such consequences, modern developers actively use mineral wool, which is in a protective polyethylene shell, to insulate frame buildings.

In order to insulate walls in a frame house, it is best to give preference to tiled materials rather than those packaged in rolls.

It is quite convenient to work with such insulation; it will not slip or caulk. The material, which contains a fair amount of phenol-formaldehyde resins, has a high degree of resistance to constant exposure to moisture.

The material stuffed with small fibers is distinguished by its high thermal insulation properties. It is recommended to use mineral wool with a thicker layer.

2.2 Stages of insulation with mineral wool

Mineral wool should be placed in the spaces between the frame posts. In this case, it is important to take into account the value of the distance so that between the tiled or roll material there was no gap.

The same applies to the space between the supports. During installation work, it is strictly forbidden to press cotton wool, as this will significantly reduce its thermal insulation ability. This is directly related to the reduction in layer thickness.

The main reason lies in the structural features of the insulating material. Inside it, air masses act as a heat accumulator, and as a result of fiber compression, the number of cavities in which air can be retained is significantly reduced.

Roll-type insulation is attached to inside sheathing using staples or a construction stapler.

In this case, the intervals should be equal, but the distance between them should be no more than 30 centimeters.

In cases where mineral wool is used, walls and ceilings acquire reliable and high-quality vapor barrier.

In addition, in order to improve its characteristics, it would be rational to use breathable membranes. The use of polyethylene is not recommended, since due to a sharp temperature change, condensation will begin to form on its surface.

The walls of a frame house should be insulated from the inside. Cotton wool is laid on the ceilings using boards. Plates of material should not be placed end to end to prevent deformation. internal structure material.

When using insulation boards enclosed in a polyethylene shell, care must be taken to ensure that its tightness and integrity are not compromised.