Installation of a shower screen with a tray. How to install a shower stall? Glass products have many advantages

Unfortunately, not everyone can boast of a large, spacious bathroom; for some, this is a problem, while for others, this option is their favorite. In any case, a shower corner is perfect option bathroom arrangement. Even if you have a large bathroom, a shower corner will not spoil the room in any way, but, on the contrary, will decorate it. However, this is a matter of tastes and principles, because some people find it more convenient to take a bath, while others prefer to wash in the shower. Do not confuse a shower stall with a shower corner, because these are slightly different things. The shower stall differs from the corner in the absence ceiling panels and back walls. In this article we will talk about the shower corner.

If you are determined to install a shower enclosure in your bathroom, but don’t know how to do it correctly this work, then be attentive to the tips that will be in this article, and then you can easily install the shower on your own. You will also learn how to choose a shower enclosure and what you need to pay attention to when purchasing.

Benefits of a shower enclosure

Such a device as a shower corner has the following advantages:

Choosing a shower enclosure with a tray

Shower enclosures differ in shape, size and material from which it is made. Also decide in which corner of the bathroom it will be installed. It is not necessary to buy a cabin and a pallet as a set, as a rule, in construction stores There should be a large selection of both pallets and booths that can be easily combined. It is worth considering the fact that when buying two parts different manufacturers, certain difficulties may arise due to the difference in size. Therefore, we select only those parts that fit each other perfectly.

Advice! Buy the corner and tray from the same store, this will make it easier for you to select and combine the two parts together.

Manufacturers produce the following types of pallets:

The latter version of pallets is very popular, and all because it has many advantages, such as: average weight, durability and relatively low price. Such a platform can be rectangular, round or square. Particular attention should be paid to the doors, because if they come into contact with the wall when opening, they may be damaged or even break. Therefore, take accurate measurements before purchasing. In appearance, glass doors also have slight differences, since they can be not only matte or transparent, but also with quite different and at the same time attractive texture and coloring. Even the door handles shower corner may differ greatly from each other.

Materials and equipment

In order to install the corner with your own hands, you will need the following components:

Installation of a shower enclosure with a tray

The first step is to install the pan, but since most pans don't come with mounting hardware, you'll have to make your own. To assemble such a frame, iron corners and a pipe with a diameter of 30-40 mm are most often used. You will have to cut and weld these parts together. There is another option for mounting the pallet - this is installation on bricks and cement-sand mortar. The installed pallet should not wobble on its base; it should fit snugly to the base.

Let's start installing the drainage system. The process of installing the siphon to the base occurs even before the control installation of the pallet to the frame. You should think in advance about how the siphon will be repaired in the future, because sooner or later it may become clogged. Install a small ventilation window so you can make repairs later. After installing the siphon, check whether it is leaking water. To do this, you need to fill the pan with several liters of water and inspect the drainage system. Also pay attention to ensuring that there is good contact between the tiles and the pallet, and that all cracks are sealed with sealant.

Now you can begin installing the panels. First of all, you need to assemble the iron frame of the cabin. Next, you need to secure the bottom guide; this can be done using sealant. How to install vertical posts? To do this, you need to use a plumb line and a level, so you can make an accurate angle of inclination. At the fastening points, use a marker to draw the points where you will drill the hole for the dowels. Using a drill and a special tile bit, make holes in the wall.

Advice! When drilling tiles with a drill or hammer drill, do not use the hammer, otherwise the tile will burst and fly off the wall.

Before you attach the studs to the wall surface, lubricate them well inner side sealant, thanks to this you will achieve better adhesion. Next, using self-tapping screws, secure the vertical guide post. After all the above operations, you can safely begin installing the glass. However, when doing this work, be extremely careful, as you can easily injure yourself or damage the glass. The glass must get into all the mechanisms manufactured by the factory, only after that it can function normally. However, in order for the doors to close normally without coming into contact with other elements of the shower enclosure, they must be adjusted. This procedure is carried out according to the instructions supplied with the corner.

It is almost impossible to take a shower or bath without drops and splashes of water flying in all directions, so the bathroom is often damp and damp. The result is mold and mildew, the cost of treating the bathroom, or even a complete replacement of the finish. But in order to reduce the amount of moisture remaining in the room after hygiene procedures, it is enough to simply install a structure there, which is called a bath screen, partition or protective screen.

In modern stores they are sold in a large assortment, that is, choosing a suitable screen will not be difficult at all, but before purchasing it will be useful to find out about the features and characteristics of different products.

Ordinary curtains, which until recently were very popular among buyers, are gradually becoming a thing of the past. The only advantage is their low cost, but otherwise they are significantly inferior to screens. Benefits of bathroom screens include:

• the walls and floor of the room are well protected from water - literally not a single drop will seep through such a structure;
• do not require special care or regular cleaning;
• unlike conventional curtains, they do not contribute to the development of pathogenic microorganisms and fungal spores;
• a variety of designs, shapes and materials makes it possible to choose a screen that is optimally suited to the interior of a particular bathroom;
• Using screens is much more convenient than regular curtains, since they do not stick to the body and do not open due to drafts;
• structures made of glass and plastic are much more durable and stronger than any oilcloth or rubberized fabric;
• Almost all screens are installed very simply, so you can easily handle the installation yourself.

Accordingly, any bathroom can be equipped with a screen, regardless of its interior. And in order to choose the right design, you need to know about operational features and varieties of screens for bathrooms.

Types of screens for bathrooms

All protective partitions for bathrooms can be divided according to two main criteria: the method of opening the doors, design features and material of manufacture.

bathroom screen

Door opening method

IN in this case There are three options: screens with sliding and swing doors, as well as accordion screens. Sliding structures are in greatest demand, as they are suitable for any bathrooms, including small ones, as well as for straight and semicircular bathtubs, which are installed in most modern apartments and houses.

Finally, “accordions” are most often used in bathrooms equipped with round or oval bathtubs. In principle, they can be installed in any room, but in conditions of limited space they will still “eat up” part of the free space. Another significant drawback of “accordions” is that after some time the numerous places where structural elements are attached to each other begin to wear out and break.

Design features

Based design features, protective partitions can be framed, frameless and combined.

1. Frame screens. The products consist of a supporting frame and several sections (usually from 2 to 6), one of which is a sash that moves to the side. The structure is installed on the side racks and fixed to the sides of the bathtub using guides.
2. Frameless screens. Screens of this type also consist of several parts, but do not have a frame. They are usually made of tempered glass with rounded corners: stationary sections are made of thick glass, movable sections are made of thin glass.
3. Combined screens. They combine both of the above types of structures - most often one of the parts is only partially fixed to the profile, which makes it possible to open and close it.

Material of manufacture

Modern bathroom screens are made of glass or plastic (polycarbonate), and each material has its own advantages and disadvantages.

If we talk about the design of screens, then there will be no problems with the choice. Designs can be completely transparent, tinted, matte or patterned, covering the bathtub partially or completely, creating the appearance of a shower stall.

What should you consider when choosing a screen?

To choose the right screen for the bathroom, you should consider a number of important nuances and features different types designs.

One of the most important aspects of the reliability and durability of the screen is correct installation, which does not require special skills or knowledge, but requires accuracy, precision and careful adherence to instructions.

Step-by-step instructions for installing a sliding glass screen

Installing sliding screens may have some distinctive features, but in general it follows the same principle. First you need to prepare the tools necessary for work:

• fastening elements (bolts, dowels);
• drill or hammer drill;
• silicone sealant and a special gun;
• screwdriver;
• building level;
• roulette;
• masking tape.

A sliding partition kit usually includes guide profiles, a rail that secures the structure, glass sections, fittings, and special gaskets that protect elements from moisture.

Step 1. First you need to attach the profile that secures the screen to the wall. You need to remove the rail from it, adjust its position using a level and mark the installation points on the surface.

Step 2. Drill holes at the marked points. If the walls in the bathroom are tiled, it is better to use special drills for tiles. Painting tape will prevent the drill bit from sliding across the surface of the tile. To make the fixation as strong as possible, it is recommended to make more than two holes into which dowels will need to be inserted.

Step 3. Apply silicone sealant to the back of the profile and attach it to the wall with screws.

Step 4. Fix the glass on the installed profile, tighten the fasteners, but not too tightly so as not to block the glass panel completely.

Step 5. The remaining gap is necessary for installing the seal - it is put on the bottom of the glass, after which the panel can be completely fixed by tightening the screws until they stop.

Step 6. Place special insulating caps on the fasteners.

The gaps that remain between the screen elements and the wall should be filled silicone sealant. It takes about a day for the composition to harden, that is, during this period it is better not to use the bathroom.

Video - Installing a screen in the bathroom with your own hands

Step-by-step instructions for installing a framed plastic screen

Another common option for a bath screen is plastic structures on an aluminum frame. The assembly of such screens is also quite simple task– to complete it you will need the same tools as in the previous case, but the algorithm for performing the work looks different.

Step 1. Assemble the main part of the screen, that is, attach the fixed elements to the horizontal ones using special screws, which usually come with the screen.

Step 2. Sliding door insert into the upper part of the frame profile, align it with the lower part and snap the bearing into place.

Step 3. Mark places in the walls for attaching vertical guides and drill holes.

Step 4. Attach the vertical guides to the screen frame.

Step 5. All places where the structure will adjoin the walls must be treated with silicone sealant.

Step 6. Place the screen in place and secure it with fasteners, put special pads on them.

After the sealant has dried, attach a handle to the screen, carefully cut the protective film around the perimeter and remove it.

Screen care

Caring for such structures is a simple process, but it requires compliance with a number of rules, since it depends on appearance and service life of screens.

1. After hygiene procedures, it is advisable to leave the door open so that moisture does not accumulate behind the screen.
2. Glass products can be washed with any cleaning agents, and in the case of plastic, you should choose a non-aggressive one. household chemicals without abrasive particles, otherwise the surface will quickly be scratched and become cloudy.
3. If a sliding screen is installed in the bathroom, its mechanism needs to be checked and lubricated from time to time.
4. The seals that protect the edges of structures from moisture should also be regularly inspected for mold and mildew, and replaced if necessary.

From the author: Hello, dear readers! IN last years We began to pay more and more attention to the comfort of our home. Modern manufacturers have also caught this wave, so the market is flooded with various devices that are designed to make our lives more convenient and cozy. Global changes have especially affected bathrooms. Toilets with lighting and radios, Jacuzzis and the like - could we have thought about anything like that fifteen years ago?

Of course, a Jacuzzi is still not found in every home. But shower cabins are becoming more and more popular. They are convenient and do not take up much space (although the latter factor depends on the specific model). In addition, closed models have many interesting features. In them you can take a rain shower or enjoy aromatherapy, get a hydromassage treatment and benefit your body in other ways.

However, this type of booth is usually distinguished by its impressive dimensions. Therefore, in small spaces open models are more relevant. They take up very little space, and installing a shower enclosure yourself is quite simple. In today's article we will look at just this procedure.

What is the difference between a shower corner and a cubicle?

The modern market offers many varieties of shower stalls, which, in general, are divided into two types: open and closed. The latter type is so named because such a model is closed on all sides: it has walls, a floor, and a ceiling. Essentially, this is a small separate room for taking water procedures.

As mentioned above, such cabins can have a set of various interesting functions for massage, relaxation, and the like. In general, the equipment brings a considerable amount of comfort to the life of the owners, this is especially true for those who really love water treatments.

Of course, there were some downsides. Closed cabins have the following disadvantages:

• complex installation procedure, especially if there are the same additional functions. In principle, you can buy equipment already assembled and not bother with connecting each element. But it often happens that such an assembled model simply does not fit through the bathroom door. As a rule, the matter still ends with calling a master who assembles the stall directly in the bathroom;
• price. Plumbing in general is quite expensive, and when it comes not just to water supply, but also to comfort, it can be completely expensive. Moreover, the more functions, the more expensive the model, which is natural. On the other hand, they usually last a long time, and they bring a lot of pleasure;
• dimensions. Large dimensions, which were mentioned in the first paragraph, can be a critical factor when it comes to a typical bathroom in an ordinary apartment building. What can we say about the notorious combined bathrooms in Khrushchev-era buildings, where it is generally difficult to turn around. Such a cabin simply won’t fit there.

If all of the listed disadvantages - especially the last one - are of great importance to you, then this is where a shower corner will come to the rescue. It is easy to install, inexpensive, and most importantly, it takes much less space than closed models.

In fact, the basic equipment of such equipment consists of a tray and doors. The adjacent walls of the building itself act as side walls. Thus, you get a corner in which the shower equipment is placed, the tray is mounted, and the whole thing is closed with a door and, partially, panels.

This corner has no ceiling, so various “bells and whistles” like a tropical shower, of course, cannot be installed here. But the work is greatly simplified. And such equipment will in any case bring with it convenience and comfort, regardless of where it is located: be it in a city apartment or in a wooden house.

To make the installation procedure easy and problem-free, we suggest reading the instructions below for installing a conventional shower enclosure with a tray with your own hands. There is also a video attached to the article, by watching which you will further enrich your knowledge. So let's get started.

Preparation for installation

The first thing to do is prepare the room.

1. Remove from it everything that can interfere with freedom of action. Of course, we are not talking about dismantling the toilet and other fixed structures. But washing machine, for example, it is better to take it out. Shower enclosure doors and panels are usually made of fiberglass. They are fragile, therefore, if you get caught on something or drop any element, you risk dooming yourself to re-purchase the broken part of the structure.
2. Invite a friend to help you. Despite all the ease, some installation steps are much easier to perform with two pairs of hands. This is both more reliable and safer.
3. Decide on a specific installation location. It is advisable that the drain hole in the pan and in the floor be located one above the other. In this case, it will be possible to connect them directly, thereby ensuring the most reliable and high-quality connection. If this is not possible, then you will have to use an additional hose. In principle, this option also has a right to life. But remember that the presence of additional adapters always reduces the reliability of the connection.
4. Level the floor where the installation will take place. The pallet needs to fit perfectly, so use a building level when working. The best option in such cases, self-leveling floors are available, with which you can level a certain area. However, if the unevenness is not too strong, and the floor is already covered with tiles, then there is no point in dismantling the tiles. You can compensate for height differences by adjusting the pallet legs.

Installation procedure

The process of installing a shower enclosure always begins with installing a tray. To do this, you will need a wrench and waterproof silicone-based sealant. And also, of course, the design elements themselves: a tray, a siphon included in the package and a drain hose.

In some models there is no siphon as such. In such cases, the hose itself takes over its function. As a rule, the kit then includes special devices that, when installed on the hose, give it a curved shape. The siphon bend is necessary to prevent penetration unpleasant odors from sewer pipe into the room. So don't ignore these devices.

So let's get started.

1. Turn the pan upside down and find the drain hole on it. Connect a siphon to this place.
2. Then fix the drain hose in the siphon. If you connected it directly to the drain hole in the pan, then install a bending device.
3. Attach an elbow to the opposite end of the hose - this part is also usually included in the package.
4. Install the elbow into the drain hole located in the floor. You need to insert it in such a way that it goes completely there.
5. Now take a waterproof silicone sealant and sequentially treat all the places where the joining took place: the pan and the siphon, the siphon and the hose, the hose and the pipe, the pipe and the sewer hole. After application, allow the sealant to dry. This usually takes approximately two hours. Try not to touch the structural elements until the sealant has completely hardened, so as not to compromise the strength of the layer.
6. After the silicone sealant has completely cured, turn the tray upside down and place it on Right place and adjust the legs to height. This is done using a wrench. Turning the leg clockwise will make it shorter, counterclockwise will make it longer. Do not forget to regularly check the levelness using a building level during the process.
7. We are done with the connection, now we attach the pallet to the wall using fasteners and treat the joints with silicone sealant. We wait again for two hours.

After the sealant has dried, you can begin installing the door and side panels. Unpack all structural elements. Try to act carefully - we remind you that fiberglass can suddenly surprise you with its fragility.

Put the glass parts aside for now, let's work on the frame first. Assemble it from metal frames. After assembly, check the evenness of all ends, as well as the verticality of the corresponding elements. Only then fix it with screws. Try not to tighten them too much, otherwise the frame may become warped.

Now we place the collected metal structure onto the pallet and check how smoothly everything is installed and fits together. It is better to do this together, since the frame must be supported on both sides.

The side frames have special holes for fasteners. It is necessary to mark these places on the wall. Then remove the frame and set it aside for now.

Drill into the wall at the marked locations. If it is covered with tiles, then do this very carefully to avoid cracking the tiles. You will need two diamond-coated drill bits designed specifically for this type of finishing material.

First, make notches on the glaze of the tile, then drill through the entire thickness of the tile with a very thin drill, and then take a nozzle of the required diameter (corresponding to the dowels) and bring the holes to the desired depth and width. Secure the dowels in them.

Place the frame back on the pallet and secure it to the wall using screws. Before doing this, coat the side frames with waterproof silicone sealant, this is done on the side that will be adjacent to the wall surface. After tightening the screws, remove excess sealant with a damp cloth without waiting for it to dry.

Install the fasteners, seals and rollers included in the kit onto the frame. Next, mount the side panels, and then the door. Be sure to check the latter: open and close several times, paying attention to the ease of sliding.

Finally, secure door handle and treat all joints on the structure with sealant. Don't forget to remove any excess before it dries. After it hardens, the shower enclosure will be completely ready for use.

That's all, dear friends. As you can see, the installation procedure does not cause any difficulties. In addition, some people prefer not to bother at all and install only a tray around which they hang a regular shower curtain.

Of course, this option looks less modern and stylish, but it also has a right to life. But in this case, you will have to first take care of a high-quality floor, since the curtain protects it from water much worse than a fiberglass structure. The choice is yours. Good luck!

The bathroom is very important room in the home, as it allows for daily hygiene procedures. And for plumbing fixtures that perform their functional tasks in the bathroom, there are a number of modern devices that provide maximum comfort to a person during their operation. Leading the way on this list are bathroom screens, which are available in a wide variety on the market.

Features and purpose

Screens for the bathroom, swing or rigid curtains, blinds - these are not all the names of this design. However, despite the wide choice of names, the screen essentially performs one task. During water procedures in the bathroom, drops of water and hygiene products partially fall on all surfaces in the room, including furniture. As a result, the room has a damp microclimate, which is fraught with damage to furniture, as well as the development of fungi and mold that are dangerous to humans, which entails the need for frequent cleaning. repair work or purchasing new pieces of furniture.

In addition, a wet floor is a rather dangerous surface on which adults and children can easily slip.

In order to eliminate the risk of such traumatic situations, as well as the formation of excessive moisture and dampness in the bathroom, it will be enough to acquire a special screen that will significantly reduce the level of moisture in the room.

This kind of protective shower screen is offered to consumers in supermarkets in a huge assortment, which guarantees them the purchase of a sliding, hinged or any other screen configuration made from durable and high-quality raw materials, having a variety of color scheme, featuring a wide selection of decor for partitions.

Screens, like blinds and curtains, are a very useful attribute of the bathroom, but in comparison with the analogues listed above, they have a number of undeniable advantages.

• the design provides maximum protection for walls, furniture and floors from water splashes: by installing doors instead of curtains, not a single drop of water will get outside;
• the screen does not require any specific care or installation of curtain spacers;
• Various microorganisms can develop on ordinary curtains - the designs under consideration completely eliminate this problem;
• wide choose different models and shapes allows you to choose a design made of glass or polycarbonate, with or without a frame, due to which the design will be in perfect harmony with the overall interior of the bathroom;
• based on numerous customer reviews, the operation of screens is several times more comfortable, since standard curtains are often glued to the body and folded like an accordion when wet, and swing open from a draft;
• the raw materials from which the structures are made have a high level of durability;
• Any home owner can install the purchased products with his own hands.

Based on the above positive features of this product, having studied the types and models presented on the market, you can make the right choice.

Varieties

All commercially available screens can be classified based on the following criteria:

• method of opening the doors of the structure;
• configuration features;
• the type of raw material used to produce the screen.

Keeping in mind the way the doors open, bathroom screens come in several types.

• Structures made in the shape of an accordion. It is worth choosing if the bathroom has a round or rounded bathtub. The disadvantages of a folding shower screen include its need for some space, due to which such models are best installed in spacious bathrooms. In addition, the connecting parts of the structure deteriorate over time, which can lead to failure of the entire product.
• Swing types. It is recommended to purchase for large rooms with a corner bath.
• Sliding products. The most popular model, its popularity is explained by the specific configuration, due to which screens with this method of opening the doors can be installed in all rooms without exception, even in bathrooms with a small area. And what is important, such products are perfectly compatible with standard straight and semicircular bathtubs, which are equipped in almost all apartments, since they work in a similar way to sliding wardrobes.

Design features suggest the presence of three types of screens.

• Products without frame. Consists of several elements made mainly of glass. For safety, the corners of such products are rounded.
• Frame screens. They consist of several sashes (on average from 2 to 6) and a supporting frame. Of all the sections, as a rule, one serves as a door. It opens by moving it to the side. Installation is carried out on racks, fastening to the plumbing itself occurs using guides.
• Combined models. They combine all the properties of the two previous types of structures. For the most part, such models have one part, partially installed on the profile. Thanks to this feature, it can be adjusted.

Based on the type of raw materials used, screens are divided into glass products and polycarbonate products. Each material has individual positive and negative characteristics.

As for polycarbonate, it is a fairly universal raw material, which is in demand for arranging buildings for dacha purposes, for example, greenhouses, as well as for arranging various partitions in the house itself.

It has a number of advantages that are relevant for structures such as a screen in the bathroom:

• resistance to temperature fluctuations;
• mechanical strength, which eliminates the risk of cracks from accidental impact;
• neutral to most chemical cleaning compounds;
• due to its light weight, it allows you to make and install doors of large dimensions, for example, up to 190 cm in height;
• during installation, the risk of damaging the material is minimal;
• Products made from this raw material are distinguished by their affordable cost.

Glass is a rather fragile material, but this property does not in any way affect its popularity as partitions for bathtubs and showers.

This is explained by the presence of advantages of raw materials, among which the following can be noted:

• not subject to rotting and corrosion;
• has a good level of resistance to chemical compounds;
• fungus and mold do not form on the glass;
• the service life of glass screens significantly exceeds that of plastic products; installation of textile curtains will also not be durable;
• low thermal conductivity;

Glass screens with various multi-colored decor allow you to transform the interior of the bathroom through color accents, which is not possible using plastic partitions.

Popular models of glass screens for the bathroom are:

• sliding glass screen Cascade 170x150 cm with three doors;
• Primo 85x140 cm;
• front screen with towel holder Sensea Optima 140x85 cm;
• Mezzo 170x150 cm made of transparent glass.

Criterias of choice

When choosing a screen, you need to consider a number of important features, which are inherent in a particular model:

• Before ordering a structure, you should take appropriate measurements in the room, taking into account that there must be a distance between the ceiling and the edge of the product to ensure ventilation;
• for walls that do not have a perfectly flat surface, it is better to purchase a design with adjustable hinges;
• when choosing a screen model, you need to take into account the size of the room so that the purchased product does not become a hindrance in the bathroom;

For small rooms It’s better to opt for transparent screens;

• the service life of the entire product largely depends on the reliability of the fittings;
• if the walls of the structure are made of material different colors, it would be useful to equip additional lighting in the area of ​​its installation;
• in combined bathrooms, you can install a side screen of 90x90 cm in a transparent design, which will not visually burden the space;
• high-quality installation is an important component on which the durability of the screen will depend.

Installation methods

You can install a glass screen yourself. In some cases, the technology may differ slightly, but in general Step-by-step installation instructions include the following steps:

• first of all, you need to purchase working tools: fasteners, a hammer drill and a drill, sealant and a gun, as well as a level and masking tape;
• first, a profile is fixed to the wall, which acts as a kind of fence for such a curtain;
• You need to remove the rail from it and use a level to mark the attachment points;
• holes are made in these places;
• the profile is treated with sealant and attached to the surface;

• the glass sheet is installed in the profile and fixed with fasteners, without twisting them to the maximum;
• a sealant is inserted into the remaining distance between the structural elements, after which all screws are tightened to the end;
• all existing gaps between the wall and the screen are filled with silicone;
• after the composition has completely hardened (after about 24 hours), you can use the bath for its intended purpose.

In most homes, bathrooms include a bathtub with a spacer bar installed above it. There is a curtain hanging on it, designed to protect the space from splashes. Many people wonder: is it possible to get rid of this not-so-attractive piece of furniture and what can replace it?

The answer is quite simple: special ones are currently on sale. shower screens. Most often, their design is made of an aluminum profile on which tempered glass or a sheet of polymer is attached.

Benefits of using a screen

By installing a screen, you can achieve the following positive aspects:

• The screen perfectly protects the room from splashing water while taking a shower.
• The design features not only provide splash protection, but also prevent a single drop of water from leaking onto the floor.
• By protecting the room from moisture, the screen becomes protection against the appearance of fungus due to excessive dampness.
• The vast majority of screens are made transparent, this allows you not to visually clutter up the space. If desired, you can choose a model that will partially or completely hide a person while he is taking water procedures.
• The surfaces of the product are made smooth enough so that water flows well over them and does not linger in the form of drops, this allows for minimal contamination of the shower screen. Sometimes the panels are coated with a special water-repellent coating, which further facilitates the active drainage of water droplets from them.
• Caring for the structure is quite simple: you only need to wipe it with a damp cloth. If it is heavily soiled, you can use window cleaners.
• The design is made in such a way as to provide unobstructed access to the bath. Installing a shower screen does not create any inconvenience when using the bathroom.
• Most modern models have an aesthetic appearance, which not only does not disturb the interior of the bathroom, but also decorates it.

The design of shower screens are divided into two types:

1. frameless;
2. frame.

Let's look at each modification in more detail.

Frameless shower screens

Frameless shower screens are most often made of glass. They are thick to provide the necessary structural rigidity. The glass sheet in this case has a thickness of up to 8 mm.

Such screens are usually used in cases where strong splashing of water is not expected. The design is a kind of screen and cannot guarantee complete protection against water entering the gaps remaining between the screen and the wall or side of the bathtub.

Screen canvas can be fixedly attached to the wall, but more often it is equipped rotating mechanism allowing the sash to open for easy access to the bathtub.

Among the advantages of such models is the simplicity of the design, which has a positive effect on reliability. In addition, due to the ease of execution, frameless models are much cheaper.

Frame shower screens

Based on the name, such screens represent a frame, most often made of aluminum, into which sheets of glass or polycarbonate are installed. The thickness of the panels is usually about 4 mm. The frame can contain one or several frames.

These designs are the most interesting and are in great demand among buyers. They also have their own varieties and may differ in the way the doors open.

Classification of screens by opening method

There are two main methods of opening, according to which screens are divided into:

1. swing;
2. sliding

Both design options are quite popular. To make your choice, you should study the nuances of each modification in more detail.

Hinged shower screens

The swing design is simpler, it is similar to the design of most swing doors. This determines the main disadvantage of such models: The doors take up too much space when opening. This is especially noticeable in double-leaf models. However, if there is enough space, the swing option can be quite convenient and functional.

The swing version is less demanding when it comes to handling, but if this point is not important, you can choose between a swing and a sliding design according to your taste.

Sliding shower screens

The moving sash is moved using a roller mechanism. The rollers move along special guides. Magnetic latches are designed to keep the moving blade closed.

Sliding design requires careful handling. It is worth noting that both the rollers themselves and their fastenings are a rather important component of the entire mechanism. They must be made of durable material. Their design must be thoughtful to ensure smooth movement of the movable sash.

You should pay attention to the requirements for the installation of sliding screens. Attaching aluminum profiles to supporting surfaces should be done using sufficiently powerful dowels and screws or self-tapping screws. If you use dowels of small diameter and length, over time the load-bearing elements may become loose, which will disrupt the smoothness and ease of movement of the sashes or, in the worst case, lead to the destruction of the entire structure.

Materials for shower screens

Shower screen panels can be made of two various types materials:

1. polycarbonate;
2. glass.

Each of them has its own characteristics.

Polycarbonate

Plastic structures have the following advantages:

• Such models are more accessible due to their relatively low cost.
• Installation of the structure is quite simple. Dismantling, if necessary, is carried out quite quickly.
• Polycarbonate boasts an unrivaled range of colors that can be matched to any interior style.

However, there are also obvious disadvantages of this material:

• The material is more prone to streaking than glass.
• Possible turbidity of the surface, reduction of decorative functions.
• Dirt accumulates more actively on the surface of the panels, which can contribute to the proliferation of various microorganisms.

Glass

Among the advantages of glass models are the following:

• Glass is easy to clean. In addition, it is often treated in production with a special composition, thanks to which a minimal amount of dirt and fingerprints remains on the surface, and they are removed without much effort.
• The decorative characteristics of glass screens are higher. Besides the fact that they already look impressive, the decor does not suffer from time. The color cannot change, since the coloring pigment is located in the thickness of the material. Drawing can be done various methods, each of which creates its own unique decorative effect.
• The strength characteristics of tempered glass are at high level. It is quite difficult to break such glass.

There are also disadvantages:

• Glass screen models are much more expensive than plastic ones.
• At strong impact or excessive mechanical stress glass can be damaged, and this can be traumatic. However, the tempering is done in such a way that if it breaks, the glass breaks into tiny fragments, which should minimize the possibility of injury.

Glass can be made with various decorative effects:

• transparent;
• tinted in various shades;
• matte;
• with an image.

Based on experience, you can highlight some points, which should not be forgotten when choosing a shower screen:

• It is recommended to install the screen at such a height that there is a small gap between the structure and the ceiling. This is important for natural ventilation space.
• If the walls of the bathroom are not level enough or have a slope, you should make sure that the structure includes adjustable fasteners.
• If you plan to purchase a shower screen with matte panels or a pattern, you should provide additional lighting above the shower, since the walls will obscure the light from the main lamp.
• The quality of workmanship of the constituent elements is of paramount importance for durability.
• It is imperative to find out the warranty period in order to insure yourself in case of unforeseen situations.
• Worth choosing products famous manufacturers to be confident in the quality of the purchased product. Currently available for sale a large number of models from foreign manufacturers. For those who prefer domestically produced goods, Salut screens made in Russia are available for sale. They have acceptable quality, and their cost is significantly lower.

Screens with pallet

A few words should be said separately regarding shower screens with tray. The screen can be installed not only in the bathroom itself, but also in any other room. In this case, we can recommend purchasing a structure with a pallet. Pallets come in various sizes, so you can choose the right model according to your own preferences or the available space. The depth of the pallets can vary, so you can always choose the optimal one. Depending on the room and customer preferences, you can select pallets of various shapes:

• square;
• rectangular,
• in the form of a sector of a circle;
• semicircular.

On sale ready-made kits available screens with pallets, among which you can choose the one you like best.

Regardless of the model chosen, when installing a screen, the shower room not only becomes more convenient to use, the interior also benefits. Currently, the screen is no longer perceived as an element of luxury, but performs its utilitarian function, while remaining a stylish element of bathroom design.