DIY transformable coffee table. Coffee-dining table-transformer: how it differs from others and how to create a children's table transformer with your own hands drawings

I have long wanted to make with my own hands both a magazine and dinner table-transformer. The idea of ​​​​creating such furniture is that the assembled table can instantly turn into a full-fledged kitchen or dining table. I decided to make my own transforming coffee table from wood. As a project, using my experience in drawing, I drew a diagram for assembling furniture. Before starting work, I prepared the appropriate tools and purchased the necessary materials.

Tools

Before making furniture, I prepared the following tools in my workshop:

• jigsaw;
• drill;
• screwdriver;
• sander;
• brushes;
• tightening belts;
• tape measure and ruler;
• pencil.

Materials

All necessary materials I bought it at a construction supermarket. I had some in stock. The list of all materials turned out like this:

• edged pine board 4100 x 400 x 25 mm;
• screws 20 mm – 40 pcs.;
• screws 50 mm, 70 mm – 10 pcs.;
• metal corners 40 x 40 mm – 4 pcs.;
• stain 0.5 l.;
• furniture varnish PF 170 – 0.5 l.;
• wood glue “Stolyar” - 125 g;
• wooden dowels 30 mm - 24 pcs.;
• round self-adhesives – 8 pcs.;
• piano hinge 400 mm – 4 pcs.

Step-by-step instructions on how to assemble a coffee table - transformer

1. I sawed a board 400 x 25 mm, 4100 mm long, with a jigsaw into pieces:

• table top and sides 800 x 400 mm – 4 pcs.;
• legs 900 x 50 mm – 4 pcs.;
• 2 crossbars 700 x 50 mm and 650 x 50 mm;
• triangular struts with sides 5, 10 and 11 cm – 4 pcs.

1. I cleaned the entire surface of the wood with an emery wheel and a grinder.
2. The boards were covered with stain.
3. Then the wood was coated with furniture varnish in two layers.
4. I cut the ends of the table top and the adjacent ends of the other two boards with a jigsaw at an angle of 45 0.
5. At the ends of one side of two 80 x 40 cm boards, I drilled mounting holes for wooden dowels with a drill.
6. After smearing wood glue on the dowels and ends of the adjacent sides of the two boards, I connected them into one tabletop.
7. He tied the tabletop with straps and left it alone for a day.
8. A day later, I removed the tension straps from the tabletop.
9. I installed a folding mechanism in the form of piano hinges, connecting the side boards with the tabletop.
10. I attached legs to the sides of the table with steel corners, the ends of which were cut at an angle with a jigsaw. The fastening was done with screws using a screwdriver.
11. I installed the struts, connecting the tabletop and legs with them. To do this, I made holes in the adjacent sides of the parts. I inserted dowels into them, coated with wood glue.
12. The legs on each side were connected by crossbars. I secured the crossbars with screws using a screwdriver so that when folding the table they would not interfere with each other.
13. I covered the screw holes in the legs where the crossbars are secured with self-adhesive tape.
14. I glued pieces of felt to the ends of the sidewalls, which become supports when folding the table. This will prevent abrasion of the surface of the supporting part of the sidewalls.
15. I also glued felt nickels to the supporting surfaces of the legs. The table will not scratch the floor with its legs, and it can be easily moved on any floor covering.
16. He opened the small table and set it on its legs. It turned out to be a comfortable dining table, which I placed in the living room.

After I assembled the transforming table with my own hands, I summed up how much money I spent and how long it took to assemble the furniture.

Cost of materials

• edged pine board 0.04 m 3 x 4200 rub. = 170 rub.;
• screws 2 cm – 40 pcs. in stock;
• screws 50 mm, 70 mm – 10 pcs. in stock;
• metal corners 4 x 4 cm – 4 pcs. x 2.5 rub. = 10 rub.;
• stain 0.5 l. = 100 rub.;
• furniture varnish PF 170 – 0.5 l. = 50 rub.;
• wood glue “Stolyar” - 125 g = 70 rubles;
• wooden dowels 30 mm - 24 pcs. in stock;
• round self-adhesives – 8 pcs. in stock;
• piano hinge – 400 mm – 4 pcs. = 4 x 44 rub. = 176 rub.

Total: 576 rub.

Labor costs

The time spent on assembling the transforming table was reflected in tabular form.

This pure time, spent only on performing individual operations. Taking into account technological breaks and rest, I assembled the table in 2 days.

A table of this design, when assembled, can serve as a convenient surface on which newspapers and magazines will be placed. The table is suitable for serving breakfast or dinner. When folded, the structure takes up a minimum usable area. If necessary, the transformer can be “turned” into a fairly spacious dining table.

Folding furniture is attractive for use in the country, in summer pavilions and on picnics. The table easily fits in the trunk of a car.

A folding coffee table is an extremely useful thing in the household. It can serve as a bedside table, be an element of decor and at the same time quickly unfold when you need to serve tea to guests. The choice of shape, folding method and size depend only on the imagination and skill of the master. If your woodworking skills are minimal, here are a few ways to make simple folding tables.

If a table is needed only occasionally, and the dimensions of the apartment are quite modest, a coffee table may take up too much usable space. In this case, you can make it foldable, putting it under a bed or shelf when not needed.

It can be made from chipboard or natural wood. This is one of the simplest DIY table options.

Assembly instructions

You can modify the table if the legs are made X-shaped. By attaching stops under the tabletop, like in ironing boards, such a coffee table can not only be folded, but also adjusted in height.

Transformable table for a large company

How to make a wooden coffee table with a folding mechanism? It’s extremely simple, because the mechanism itself is sold ready-made. It is better to choose more expensive options - they are much more reliable than their cheap Chinese counterparts.

Manufacturing instructions

In this case, you do not need an additional tabletop stand, but you need to assemble a frame on which the folding tabletop will rest.

Original and simple coffee tables

With unlimited imagination, you can make very beautiful and original tables. For example, from wooden boxes! By connecting four drawers in a circle with ordinary nails, installing them on a sheet of plywood with wheels and painting them, you can radically transform the interior.

For such coffee table it took 4 pieces of 45 cm and 26 pieces of 15 cm. Perfect solution for interior in high-tech style.

A simple way to make a beautiful wooden coffee table is explained in detail in the video:

Milky colored transformable dining table for guests

For a small apartment, furniture such as a transforming table is irreplaceable. It can be easily transformed from a compact coffee table into a full-fledged dining table for several people.

The coffee table easily turns into a full-fledged table for entertaining guests

Read our instructions and make sure that assembling the transforming table is very simple.

Dining and coffee options for a transformable table with dimensions

Necessary tools for furniture assembly

To successfully assemble the transformer you will need:

• Phillips screwdriver or screwdriver with attachments;
• furniture hammer;
• fasteners and accessories included in the delivery kit.

Detailing the table frame and its legs

Box with fittings and fastenings

Despite the many offers on the furniture market, for most manufacturers the process consists of the following steps:

Housing assembly

Assembling the corner legs of our table

All legs for the transforming table are assembled

Corner legs of two halves are connected with screws or eccentrics. In the same way, a body is assembled from long and short drawers.

Detailed case assembly process

Screw the legs to the body according to the instructions

IMPORTANT! Special holes are made on the legs and drawers for simultaneous installation of the lift and screed of the entire structure. Check after assembly if they match.

Assembled base with legs

Nail the plastic foot pads to the bottom ends of the legs. At the upper ends of the drawers, install shock absorbers to soften the impact of the tabletop when folding it.

We nail heel pads to the legs

Installation of the lifting mechanism

Installation diagram of the lifting mechanism

Bring the lift into working position. For this:

Fixed springs for operation of the transforming table mechanism

The mechanism is in a calm, unexpanded state

IMPORTANT! The legs of the holders designed for a folding tabletop are higher than those made for the underframe.

Mechanism for bringing the table to the upper position

Installation of countertops and underframes

Mounting a smaller part of the countertop

Installing the base for a large part of the tabletop

Screw the bottom flap of the book-table top and the base to the holder platforms. WITH outside Under the table, install shock absorbers that absorb shock when unfolding the tabletop. Using an outside-in motion, fold the lift legs into the box. It will be covered by the bottom of the tabletop.

Fix the upper movable part of the tabletop

Place the second half on top so that the end holes for the hidden hinges are on one side, and their center-to-center distance is minimal (about 14 mm). Carefully insert the hinges and secure with screws.

Hidden hinges to secure the table when assembled

The table you assemble will last a long time. Do not forget to tighten its fastening joints once a year, clean the surface with a dry soft cloth or a special furniture polish.

Coffee version or folded table

The process of transforming a table from a coffee table to a table for receiving guests

Dining option or unfolded table

Video: Transformable table. Assembly

Most apartments cannot please you with a wide area. Residents have to get out of their way in order to deceive the space and not deprive themselves of necessary items. Multifunctional furniture helps you win extra square meters, and belongs to this group.

Transformable tables are well suited for the kitchen, living room and even bedroom. This piece of furniture can be made in different ways, depending on the functions that you want to give it.

This table is also called a folding table. It is classified according to its functions:

• coffee table;
• Coffee table - workplace;
• table - storage system.

The coffee-dining option can be found most often, because the number of friends and acquaintances who come to visit increases over the years, but the living space does not.

The transformable dining table is unnoticeable and does not detract from valuable space. IN common days it plays the role of a coffee table, and on holidays it turns into a real dining table. In order to seat 5-7 people, a few simple manipulations are enough. This is suitable when the whole space is connected into one.

When creating a coffee table - a workplace, a different type of tabletop is used. There is no need for it to unfold completely or change shape. This version of the transformable table turns into a desk, taking required height. Additionally, the furniture is equipped with drawers to store office supplies. Depending on the fastening system, the table can be given several positions.

Models with smooth adjustment mechanisms are more convenient to use. With their help, you can organize a workplace in any corner of the apartment.

The table storage system has original design. It consists of two or three drawers and a table top. The table opens due to rotation around its axis.

Folding device

You can’t skimp on it, because ease of use depends on it. The table should unfold in a few movements and not require much effort.

Folding tables with a complex automatic mechanism provide simultaneous change in the area and height of the tabletop.

Table frame

The duration of operation depends on its strength. Frames come in different materials:

• wooden;
• metal;
• with plastic parts.

Structures made of metal and wood are considered the most reliable. They withstand repeated unfolding and folding cycles well. Frames with plastic components are cheaper, but do not withstand long-term use. But if the table will rarely be transformed, this option can be considered.

Legs

They serve as a support, so they must withstand a large load, which increases when the table is unfolded. Thick glass supports have proven themselves to be quite good. They themselves are quite heavy and can withstand considerable weight. Glass legs are perfect if you need a transformable table for the living room.

Wooden supports also cope well with the load. This option is suitable for classic interiors.

Additionally, you should read. It depends on the material from which the top is made appearance products.

Such furniture comes in several varieties, which depend on the table transformation mechanism:

1. Using inserts. It is considered the most popular type. The design has a built-in tabletop, which diverges along the guides at the moment of transformation. The additional part of the tabletop can be placed in the center or on the sides of the table.
2. Using an automatic mechanism. It has one or two additional surfaces located under the tabletop. When the main part begins to move, the additional parts also move. This type of table can have several layout options and have gas lift or springs. The latter option is considered more reliable.
3. Double decomposition. The model consists of two surfaces stacked on top of each other. To unfold such a table, just fold back the top part.
4. Rotary table . Interesting option, in which the main top and additional tabletops do not form a single whole when expanded. To create such a table, special metal guides are used.

What is needed to create a transforming table?

Many people decide to make such a piece of furniture themselves after looking at the prices for transforming tables in stores. The finished table will cost about 15 thousand rubles. If you do it yourself, you can save at least 5 thousand rubles.

Project cost:

• Transformation mechanism – from 3 thousand rubles.
• Chipboard panels for tabletops and legs – from 500 rub.
• Fasteners – from 50 rub.
• Set of screws and self-tapping screws – from 200 rub.

It’s possible to make a folding table for $100.

Manufacturing consists of several stages:

1. Choosing a folding mechanism.
2. Creating a project.
3. Cutting parts from a chipboard panel.
4. Initial fitting of parts.
5. Installation of the frame.
6. Installation of table supports.
7. Installation of countertops.

To make a high-quality transforming table, it is better to create drawings in special computer programs. They not only draw a layout of the future furniture, but also calculate how much materials are needed and create a cutting map. The programs are quite simple to manage, so creating a project will take one or two days.

The number of parts and their sizes can be ordered in the same store where chipboard panels are sold. The cut strips will only need to be bolted together, after which the transformation mechanism will be installed. For smooth installation, you need to make markings with a pencil before drilling holes for the screws.

The finished table will be no different from store exhibits if you select a high-quality transformation mechanism and materials for the frame. This type of furniture should be chosen if you do not know how to create

Dear visitors to the site “Visiting Samodelkin,” from the material presented by the author, you will learn how you can independently make a transforming table for a gazebo from a 30x80 mm board.

I used different types of boards for the table: birch, pine, aspen, but it is best to take hard types of wood, such as birch, because the table and two benches are designed for 6 people, that is, the structure must withstand high loads.

The advantage of this table is that it compactly folds into a bench with a backrest and back into a table with two benches; it takes up little space when folded.

So, let's look at what exactly is needed to make a transforming table?

Materials

1. board 30x80 mm of different species (it is better to take birch boards)
2. metal corners
3. wood screws
4. wood glue or liquid nails
5. varnish
6. stain
7. M12 bolts
8. nut
9. washer
10. nails

Tools

1. hacksaw
2. screwdriver
3. drill
4. hammer
5. ruler
6. pencil
7. roulette
8. protractor
9. corner
10. brush

Step-by-step instructions for creating a transforming table with your own hands.

After a long search on the Internet for a suitable drawing, I got to work, first of all I drew templates for the legs directly on the floor, you can also use a sheet of plywood.

Next, he saws the boards according to size, the author used different breeds wood: aspen, pine, birch, but it is best to take hard wood. Please pay attention! There will be two benches, namely internal and external. First of all, the master makes an outer bench, everything detailed dimensions He indicated to us directly in the photographs, which, mind you, is very convenient. The height of the legs is 440 mm, the width of the legs at the bottom is 400 mm - this is very good for the stability of the bench. Attention important point! the length of the inner cross member is 150 mm, we remind you once again The crossbar is located inside.

The length of the outer bench is 1380 mm; before direct assembly, all workpieces should be thoroughly sanded and be sure to chamfer so that the surface is smooth, even, as they say, “Without a hitch.”

The bench turns out to be simple, and the master makes the fastening using wood screws, wood glue and, for greater reliability, he adds metal corners, since the structure must be extremely strong.

So, let's move on) Now you need to collect Inner bench Note! The height of the legs on both benches should be strictly the same, but the crossbar that fastens the legs is moved outwards and its length is accordingly increased to 400 mm, the length of the top bar is 350 mm where, at a distance of 40 mm from the edge, a hole is drilled for an M12 bolt and drilled out to recess the bolt head into cavities of the board so that nothing protrudes. The author indicated all the necessary dimensions directly in the photographs.

The length of the bench is 1440 mm, but in each individual case the dimensions may vary, because everyone makes it for themselves, but as a standard we use the dimensions presented by the master.

Holes are drilled in the top bar.

After both benches are ready, you need to try them on and one should fit into the other with a small gap (see photo)

That is, two benches when folded should create one whole.

This is exactly what should happen in the end.

We've sorted out the benches a little, now let's move on to considering the author's further actions, namely the manufacture of brackets from timber. The angle of connection of two bars should be about 100-105 0 (see photo) where beam “A” is responsible for the width of the tabletop, and beam “B” is the height from the top of the bench to the tabletop.

A hole is drilled in timber “B” for an M12 bolt and drilled out to recess the head into the cavity of the wood.

After that, the resulting brackets should be connected to the inner bench; we place a washer at the connection point so that there is no mating.

The head of the bolt is recessed into the drilled hole.

The same is true on the opposite side.

In general, 2 brackets are fixed in this way, which are responsible for the height and width of the tabletop.

Then you should align both brackets evenly.

And now the fun begins)) you need to connect the tabletop with the outer bench, this is done using a straight strip, its dimensions are indicated in the photo.

These strips need to be made in 2 pieces, the author struggled for a long time to get the exact size during the fitting process, so in each individual case there may be errors. To begin with, the master drove nails along the edges of the planks and made a mark with them, that is, he drove a nail so that it stuck out a little on the other side and made a mark, and then drilled a hole for an M12 bolt

Everything must first be carefully adjusted, and then drilled calmly, as they say, “Measure twice, cut once.”

It is imperative to make a limiter on this bar so that your tabletop does not move apart; for example, the author’s one looks like this.

That is, when unfolded, it will fix the tabletop in a level position and will not allow further movement.

As you can see, everything is quite simple, a piece of board is cut at a certain angle and attached to the plank using 2 self-tapping screws.

For complete symmetry, everything is done the same on the second bar.