the main Concrete

The moment of installation is the drying time. Liquid nails - assembly glue, instructions for use and characteristics, video. How to use liquid nails in low temperatures

During renovation of premises, decoration of buildings and interior decoration, various materials often have to be bonded. Glue ceramic tiles, plastic, chipboard, mirrors and even bricks quickly and easily using modern look construction glue - liquid nails. Due to the content of fine-grained filler in it, they can fasten parts of different materials, and the rubber in the composition is responsible for high plasticity. The popularity of such glue among builders quickly gained momentum, tk. Liquid nails have many advantages over other materials:

fast adhesion (from a few minutes to 24 hours);
resistance to different temperatures;
ease of use;
no need to make holes as for ordinary nails;
moisture resistance;
economical consumption;
wide range of applications;
withstands heavy loads;
affordable price.

In total, there are two types of liquid nails that differ in composition.

Neoprene based on organic solvent. They have a strong chemical odor and are unsafe for humans. They differ in moisture resistance.
Acrylic (on water based). Absolutely harmless, but not resistant to high humidity and are only suitable for uneven (porous) surfaces.

Liquid nails, depending on the purpose of use and field of application, are divided into universal ones, for tiles, concrete, plastic, mirrors, foam, metal, etc. Each manufacturer indicates the purpose of their product on the packaging. It depends, first of all, on the composition. Of course, despite the large number of advantages of liquid nails, it is easy to buy goods of inappropriate quality on the market. This can lead to such unpleasant consequences as poor bonding of the material, rapid loss of strength, bad smell for a long time, etc. In our rating of the best liquid nails, only proven manufacturers and products with positive reviews are presented.

Best all-round liquid nails

In everyday life and construction, the maximum in a convenient way compounds of various materials become versatile liquid nails. With one cartridge close at hand, you can embody daring design solutions... Experts recommend paying attention to several formulations.

3 STAYER BlackPRO UNIVERSAL

The choice of professionals
Country: Germany
Average price: 215 rubles. (280 ml)
Rating (2019): 4.8

Liquid nails from Germany STAYER BlackPRO UNIVERSAL can boast a wide scope of application. The high quality of the product was appreciated by domestic finishers. With its help, door and window frames, ceramic tiles, wooden elements, mirrors and more. Professionals note the excellent adhesion of the glue, it grasps immediately and reliably fixes the parts to be glued. Liquid nails feel great at different temperatures (-20 ... + 60 ° C), which allows them to be used not only indoors, but also when finishing external surfaces. But it is recommended to apply the composition at positive temperatures (+10 ... + 30 ° C). When developing the product, German chemists took into account the experience of specialists from different countries.

Users with the same success mount PVC panels and wood, ceramics and plastic with liquid nails. There are no particular complaints about the glue.

2 Titebond Multi Purpose

The most durable
Country: USA
Average price: 215 rubles.
Rating (2019): 4.8

Liquid nails from a well-known American manufacturer have good technical characteristics. The multi-purpose adhesive is suitable for both indoor and outdoor use. exterior decoration... Reliably and quickly glues chipboard, MDF, metal, tiles, concrete, etc. Just 20-30 minutes is enough to get a super-strong result. Titebond Multi Purpose has a light beige shade, optimal consistency and is distinguished by the absence of a pungent odor.

Advantages:

safe for humans;
suitable for a large number of materials;
frost resistance;
moisture resistant;
dries quickly;
securely and firmly holds materials together.

Flaws:

not found.

Construction is a field that is relevant always and everywhere. People buy and sell real estate, renovate premises and create unique interior designs using building materials. One of the most popular among them are liquid nails. But what is their difference from ordinary construction glue?

1 Moment Mounting Universal

The optimum ratio of price and quality
Country Russia
Average price: 230 rubles.
Rating (2019): 4.9

The construction adhesive of the most popular manufacturer "Moment" has a universal purpose. It is suitable for bonding fiberglass, concrete, wood, brick, polystyrene panels, etc. With a setting time of only 15-30 minutes, Moment Montage liquid nails also have high strength. They are capable of withstanding a load of 40 kg / m². Big advantage of this product in front of similar ones - high resistance to temperature changes (during operation from -29 to + 60 ° C).

Advantages:

is slowly consumed;
very durable;
elasticity;
water resistance;
convenient packaging;
wide range of applications;
can be used even on uneven surfaces.

Flaws:

unpleasant odor;
toxic.

Best Liquid Nails for Plastic

In order to securely glue the plastic, and at the same time not dissolve its surface, special liquid nails are required. Avoid buying adhesives that contain organic solvents.

2 Quelyd Mastifix Ultra

The best quality
Country: France
Average price: 212 rubles.
Rating (2019): 4.7

Quelyd Liquid Nails are designed for bonding plastic, stone, wood and other materials. The glue is made on a water basis without solvent, therefore it is odorless and completely safe for humans. The adhesive force can be up to 150 kg per m². Very heat resistant (up to + 120 ° C). Adhesive solution Mastifix Ultra can be used indoors and outdoors.

Advantages:

high efficiency;
dries very quickly;
excellent customer reviews;
withstands heavy loads;
suitable for many materials;
heat resistance;
perfectly glues PVC products.

Flaws:

not found.

1 KRAFTOOL KN-915

Better adhesion
Country: Germany
Average price: 150 rubles.
Rating (2019): 4.8

German KRAFTOOL KN-915 glue is designed for gluing PVC products. Ideal for kitchens and bathrooms. Firmly adheres plastic both to each other and to wood, dry plaster, metal, etc. Differs in instant setting - only 10 minutes. Plastic, easy to use and safe. An additional plus is the content of the antiseptic in the composition. Liquid nails KRAFTOOL KN-915 are resistant to moisture and high temperatures.

Advantages:

good adhesion;
perfectly glues plastic;
antiseptic in the composition;
resistant to temperature changes;
created using unique technologies;
low cost.

Flaws:

not found.

Best Liquid Tile Nails

Some options ceramic tiles or mosaics are required to be laid with liquid nails. The glue line must be able to support sufficiently heavy finishing elements, both in dry rooms and in the bathroom.

2 Tytan Ceramics and stone

Excellent value for money and quality
Country: Poland
Average price: 180 rubles.
Rating (2019): 4.8

Tytan acrylic adhesive is ideal for ceramic tiles. It does not contain solvents and is almost odorless. The initial setting takes place within 5 seconds! Thanks to the optimal consistency and special packaging, Tytan Liquid Nails are easy to apply to both vertical and horizontal surfaces. Also suitable for other products: wood boards, plaster decorations, stone, ceramic skirting boards, etc.

Advantages:

does not crack;
perfect white color;
can be painted after drying;
without smell;
firmly glues products;
high adhesion.

Flaws:

not found.

1 LIQUID NAILS LN-901

Best line-up
Country: USA
Average price: 220 rubles.
Rating (2019): 4.9

A real classic in its segment is the LIQUID NAILS liquid nails. This product has been on the market for about 30 years. Differs in special wear resistance - up to 50 years. When gluing, it makes it possible to correct the position of the materials within 10 minutes. Differs in resistance to humidity and temperature extremes. Strongly bonds even the heaviest materials, including ceramic tiles.

Advantages:

excellent composition (no acetone, toluene);
easy to use;
firmly and reliably glues materials;
long service life;
high impact resistance.

Flaws:

a strong chemical odor for the first few days.

Best Liquid Nails for Wood

Wood is a unique material in construction. In order to reliably glue wood elements, liquid nails must have good adhesion, penetration and resistance to moisture.

2 Vermeister Quick Stop

For vertical surfaces
Country: Italy
Average price: 440 rubles. (310 ml)
Rating (2019): 4.7

Italian glue Vermeister Quick Stop possesses fast setting. It is water-based which makes it safe for indoor use. The composition does not contain solvents, epoxy or amine compounds hazardous to humans. There is no smell during operation, so additional ventilation of the room is not required. Liquid nails are ideal for installing wooden accessories such as profiles, skirting boards, extensions, platbands, etc. Thanks to their high adhesive capacity, a strong and durable joint is formed in a short time. The maximum joint strength appears in 1-2 days after gluing.

Builders and finishers note such advantages of Italian glue as instant setting after joining parts. The edging or platbands made of wood are ideally mounted. The downside is the exclusively internal use of the composition.

1 Makroflex Mf910

Elasticity and water resistance
Country: USA
Average price: 200 rubles. (400 g)
Rating (2019): 4.9

When it becomes necessary to glue wood panels inside or outside the house, the best option will become Makroflex Mf910 liquid nails. Due to its moisture resistance, it is possible to mount not dried wood. The elasticity of the adhesive makes the connection reliable and durable, even under strong vibration. Frost resistance of the composition expands the scope, allowing you to work with wood both inside the house and outside. Experts note the incombustibility of the material after complete hardening.

Users are impressed by such qualities of liquid nails as fast setting on the surface. At the same time, it is possible to make adjustments to the position of the wooden panels for some time. One feature of the gluing technology should be taken into account. After applying glue to one of the surfaces and holding for 5 minutes, it is necessary to tightly connect the parts to be glued, and then separate them. After 5-10 minutes, the final connection is made.

The best liquid nails for stone, brick and concrete

Wall decoration with stone or concrete tiles has become very fashionable. Heavy duty installations will require ultra-strong liquid nails with short drying times.

3 ZUBR Expert KM-250

The best domestic liquid nails
Country: Russia (produced in Poland)
Average price: 237 rubles. (300 ml)
Rating (2019): 4.6

Domestic development ZUBR Expert KM-250 is widely used in professional construction. The transparent composition has excellent adhesion, vibration and shock resistance. Experts note the resistance of the seam to adverse weather conditions. The strength of the bond is maintained in a humid environment, with strong temperature drops, under the influence of UV rays and ozone. At the same time, the adhesive remains flexible and reliable. Builders use the composition when sealing or joining concrete, stone, ceramic tiles, for gluing wood or PVC panels. You can do finishing work both inside and outside buildings.

Users praise the strength and durability of the glue line. Liquid nails do not spoil the finish when dry, transparency persists over the years. The disadvantage is the presence of solvents in the composition, as well as the high price.

2 Ultima 309

Liquid nails for heavy structures
Country: Malaysia
Average price: 193 rubles. (360 g)
Rating (2019): 4.8

Professional liquid nails heavy duty is a product from Malaysia Ultima 309. It is specially designed for the installation of heavy structures. You can use the composition as when conducting internal works and for exterior decoration... Experts note that liquid nails set instantly, firmly holding stone or concrete tiles. No additional support is required. After drying, the seam withstands not only mechanical stress, it is not afraid of moisture and detergents. Despite the fast drying (3-5 minutes), the final hardening occurs after 24 hours.

Users in the reviews call Ultima 309 the best liquid nails for stone, brick and concrete finishing materials. They are affordable and easy to use. But due to the presence of solvents in the composition, it is necessary to ventilate the room.

1 Kraftool KraftNails Premium KN-901

Maximum resistance to temperature extremes
Country: Germany (made in Poland)
Average price: 202 rubles. (310 ml)
Rating (2019): 4.9

The strongest adhesive in its class is the German-Polish product Kraftool KraftNails Premium KN-901. It provides super strong bonding of heavy building materials. Experts consider liquid nails to be the best compound in terms of resistance to temperature extremes. The connected elements can be operated both in severe frost (-30 ° С) and in tropical heat (+ 50 ° С). With the help of a unique glue, it is possible to mount problematic materials, for example, frozen wood, wet lumber, brick, stone or concrete panels, hardboard, metal, slate, etc. Only due to super-strong adhesion, liquid nails can firmly adhere heavy elements.

Builders finishers never cease to be amazed at the endless possibilities of the product. They praise it for its elasticity and strength, durability and water resistance, ease of use and resistance to temperature extremes.

Liquid nails are such a special glue used in construction, and its production requires the use of a special composition based on liquid rubber and various additives in the form of polymers of special clay or chalk. Its application is wide enough and not only for construction.

Liquid nails Moment Installation are available in two groups:

Based on synthetic resins. This composition contains organic solvents, which can be easily identified by the characteristic pungent odor. This glue has its own list of materials with which it reacts, since organic substances, when interacting with plastic, dissolve the latter. This glue is designated MP and is not used for work with foam, PVC, as well as for work related to fire safety. The main advantage of this glue is its excellent moisture resistance and strength. They are mainly used for outdoor work.
Based on aqueous acrylate. It is a neutral line-up. chemical composition, used for working with PVC panels, for gluing foam skirting boards. It can be used for interior work.

The first time this substance was tested as an adhesive was in 1968 when two partitions made of wood were glued together. The test was successful, and the composition was put into production. Since then, the work on improvement has not stopped and until now, because the best is the enemy of the good. This compound, called the Moment Installation glue liquid nails, is now used to bond with such materials, wooden structures, glass, plastic, plexiglass, aluminum and alloys, as well as drywall and cork. Liquid nails are also used for repairs, for sealing joints. Also, with its help, you can stick heavy wallpaper, for example, from bamboo.

Selection of glue by category

Sometimes you can observe such a picture, for example, in OBI in front of shelves with glue, a person stands and helplessly examines the entire range of Montage glues, hesitating to make a choice, but the consultant is not around or he is busy.

Variety of adhesives Moment Installation

To understand this variety, you need to know which brand is suitable for which work.

Liquid nails Moment Installation super strong

It is used for outdoor and indoor work, in case you need to fix heavy structures, without using additional mountings.

Liquid nails moment installation super strong

They can not only glue, but also fill gaps and seams. It sets very quickly, but there are several minutes to trim the part. The glue is quite durable and can withstand temperature changes, as well as exposure to UV rays. It can be applied to damp surfaces, which not all adhesives can do. It can be applied both on a smooth surface and on a surface with pores, that is, on bricks, ceramics, fiberboard, drywall, plywood, glass, mirror, metal, various plastics. Not recommended for non-ferrous metals, acrylic glass, polyethylene, polypropylene, PVC and similar materials. After drying, the joint can be colored.

When working with expanded polystyrene, the surfaces to be glued must be covered with diluted wood glue, and after drying, liquid nails can be applied.

It is produced in packages of 400 grams, and looks like a white toothpaste. To buy just such a glue liquid nails Moment Installation, you need to pay 200 rubles.

Liquid nails instant installation express

With this compound, as a glue, they work for gluing parts both indoors and outdoors. It is moisture resistant, but for quick setting it is necessary that one or both of the materials to be glued absorb moisture. Withstands negative temperatures, does not contain solvents.

Liquid Nails Moment Installation Express

Express glue Moment Installation liquid nails are used for gluing materials such as chipboard, MDF, CORK, metal, wood, gypsum parts, polystyrene, polystyrene, as well as during installation wall panels from the above materials. With its help, window sills and door frames, as well as baseboards, are installed, that is, the parts should not have a lot of weight. Available in the following packaging: 125 grams, 250 grams, 400 grams. The price of Liquid nails express glue Moment Installation on the most common packaging 250 grams in Moscow 106 rubles, 400 grams - 200 rubles.

Liquid Nails Moment Installation Instant Grip

This material grips the parts to be glued with an instant grip like a Bull Terrier, and the grip strength over time is the same as from the first seconds.

This is a feature of this glue.

Liquid Nails Moment Installation Instant Grip

Another feature of the glue is that it adheres to surfaces that do not absorb water. It also does not lose its properties when exposed to moisture and negative temperatures... Can be used both for work both indoors and for repair and construction works on air.

Can be used for the same materials as the glue express Moment Installation liquid nails. Does not bond products made of high and low pressure polyethylene, polypropylene and teflon.

When gluing surfaces, it is recommended to use a method that is called a toothpick technique on the Internet. Available in two packs, 125 grams and 375 grams. To buy this glue liquid nails Moment Installation, you need to pay 300 rubles.

Liquid nails moment installation universal

This glue has multidirectional applications, and it is a high quality glue. It contains synthetic rubber and various resins. A resin additive is added to improve the tackiness.

Liquid nails Moment Installation universal

It is convenient to work with glue, excess smudges can be washed off with water, while it does not lose its properties when exposed to moisture and frost, and also has good strength.

They are used for joining materials such as wood, fiberboard, brick and concrete, as well as for gluing stone and marble masonry, as well as for fiberglass, glass, polystyrene, for example, in a bathroom. Just like the previous brands, it does not glue parts with the use of polyethylene, polypropylene, Teflon. Available in 400 gram packs. All Henkel products are warranted for 18 months. Price for glue Moment Installation liquid nails 200 rubles.

In addition to these brands, Moment Installation "One for Everything" is produced Superstrong polymer-based, Moment Installation Express Decor MV-45 for wall panels based on acrylic, Moment Installation Express Decor MV-45 glue of the highest quality, Moment Installation Extra strong MP-55 Their composition , which consists of synthetic resin and solvents as a base, is used for heavy structures, Moment FIX Universal, a very interesting acrylic-based composition, which is proposed to be used for gluing of various kinds finishes, rosettes, tiles for the ceiling and skirting boards, Moment FIX Expert, without organic solvents, interesting because the parts can be moved within 15 minutes.

As you can see, Henkel is constantly working on new types of adhesives.

Basic rules for the use of adhesives Moment Installation

If the glue is made on the basis of synthetic resins, such as Extra strong, it contains phenol. When using it, it must be remembered that glue vapors are very hazardous to health and, moreover, they are flammable. Therefore, it is used only for outdoor work to connect any materials, except for expanded polystyrene. You need to work with a respirator and protect your eyes and skin from glue.

Of course, the company is developing new and new brands of adhesives, especially since there is a demand for them. Nowadays, liquid nails are produced, which are based on silane polymers, which have excellent adhesion and do not have toxic constituents in the composition.

Many of those who independently make home repairs or are engaged in construction have come across such material as liquid nails. This is nothing more than a good glue based on polymers and synthetic rubber. The adhesive composition appeared on the Russian market in the early 90s of the twentieth century, and the name remained a household name or another name - assembly glue.

Adhesives - construction assistants

Before talking about use, it is worth deciding what types and varieties of adhesives exist and their characteristics. Of all the diversity, two groups stand out:

on an organic basis (hydrocarbon soluble);
acrylic-based (water-soluble).

There is a large assortment of assembly glue on store shelves. It is designed to work with various materials, for different loads and operating conditions. Formulations range from lightweight and versatile to very strong adhesion.

Using mounting glue

Using for bonding materials during construction, installation and renovation works, assembly glue can be safely called universal. It can be used to connect:

1.plastics and polymers:

Before using the glue, you should read the instructions. Due to shelf life limitations, you should look at the release date. Having decided on what composition will be used, the room should provide temperature regime and forced ventilation.

Instructions for the use of adhesives describes that work is carried out at a positive temperature, but not less than + 5 ° C. When using organic-based formulations, the room should be ventilated, and ideally, work should be done outside the room.

Initially, the surface is prepared. Impurities and old composition are removed. If necessary, the surface is degreased. If the parts to be glued have increased porosity, then they are pre-primed.

Then the adhesive is applied. Depending on the parts to be joined, the base is applied in dots or stripes. A continuous strip can be straight, curved (serpentine), or mesh.

For high-quality application of these compounds, glue guns are used. There are also tubes on sale. The glue is simply squeezed out of them by hand, but the quality suffers greatly.

Due to this, the composition does not grasp immediately, there is no need to rush. The parts to be joined are aligned, compressed tightly and held under pressure for a while, as described in the instructions. It usually does not exceed three minutes.... After that, the excess glue must be removed.

The curing speed of the assembly glue depends on its composition and lasts from 11 hours to a day. To hold large and heavy elements, stands or props are arranged to prevent lowering. It is better not to touch heavy elements for a week until complete adhesion occurs.

After that, you can carry out further work related to the finishing of the fixed items.

How to glue with liquid nails, you can find out by watching many videos on the Internet devoted to this topic. In addition, you can read reviews, advice on the selection of glue for the material, and more.

Devices that facilitate the work with tubes

Almost the entire assortment of liquid nails produced is packed in small-diameter cylinders with a spout (tubes). The volume of each is approximately 310 ml. For ease of extrusion and economical use, glue guns are used.

Professionals usually use expensive, mechanized electric models. For one-time, infrequently and in small volumes of work carried out, hand guns are used. Unlike electrical models hand guns are reversible.

Constructive design of hand-held models presented on the market in three types:

frame or skeletal;
with a one-piece body;
with a half-body.

Using a pistol is easy... For this:

By pressing the lever, you need to take the piston back, freeing up space for the tube.
The opened tube is inserted into the place designated for it.
By pulling the trigger, the piston is brought to the moving bottom of the assembly adhesive package.
Pressing the trigger with the application of force moves the piston and the bottom. This pushes the adhesive out through the spout.
After the tube is empty, it is easy to replace it. Manipulations should be done starting from point 1.

Best Liquid Nails

There is no unequivocal advice on this matter. But it is worth paying attention to the following. For foamed materials, the "Extra Strong Moment" is well suited. Its neoprene base is highly durable. However, he does not favor smooth plastics and is intended for interior work.

To glue ceramic products fast-drying compounds such as "Solvent free" and "Titan VB-50" are required. LN-930, Tigger construction adhesive wood will help to fix the mirror.

Advantages

Flaws

Selection of glue for specific conditions.
Organic formulations have:
Strong smell;
on contact with skin irritates the skin.

Approximate calculation of consumption

Each tube contains characteristics and information on the average consumption per 1 m2. Usually, however, these values apply only to ideal conditions. Excessive consumption depends on:

irregularities and surface defects;
consistency;
temperature;
humidity;
type of tool;
employee qualifications.

How to remove the adhesive if necessary

Exist different ways removing assembly adhesive. It all depends on the degree of drying. If the adhesive has not yet begun to set, it can be removed with a sponge soaked in warm water or using a mineral-based solvent.

If the glue is frozen, then it will have to be removed with the help of specialized cleaners or mechanically. A scraper or blade is suitable for this. Although there is a high probability of surface damage.

Alternatively, you can heat the glue on the part. It begins to turn into a viscous state after 55 ° C. After that, the residues are easily removed with a scraper.

In general, this construction material has established itself on the positive side. And consumer reviews are always positive. Learning to work with him is not difficult.

We always have liquid nails at home. A very useful thing, as it turned out. How could we do without it before, because liquid nails are such a universal thing. Its application is constantly and everywhere.

Alexander

Universal invention

Anastasia

I was very pleased when I found out about such a versatile invention as liquid nails! They will always come in handy during construction or renovation, even children used them in the manufacture of masks and other decorations for the performance.

Liquid nails are a type of construction glue designed to connect homogeneous and dissimilar materials and capable of withstanding sufficiently heavy loads. This product received its name from the American brand Liquid Nails (translated from English - liquid nails), created back in 1968 by Macco.

In the vastness of the domestic market, the development appeared in the mid-nineties and since then has been irreplaceable assistant in the professional field. Found liquid nails in use in everyday life. True, not knowing how to use liquid nails can seriously damage the treated surfaces. Therefore, it is imperative to study what the material is and what the technology of working with it is. And it will not be superfluous to have information on how to wash liquid nails if something suddenly went wrong.

Composition of liquid nails

The "mixture" is based on synthetic rubber and various polymers.

IN classic version"Product" as a filler is a special clay - with increased plasticity. It is mined in the USA, in the state of Texas. Here, in fact, the key production facilities of "local" manufacturers of liquid nails are concentrated.

A number of developers instead of "miracle clay" use calcium carbonate (in simple words - the most common chalk). According to many experts, this is far from the best effect on the strength characteristics of products.

Types of liquid nails

The power, adhesion and resistance of liquid nails to external factors are primarily determined by their chemical composition.

On this basis, it is customary to distinguish between organic and water-soluble adhesives.

Water-soluble products are made on the basis of polyurethane, PVC or acrylic copolymers. It has good adhesion to many building surfaces and is characterized by fairly high environmental friendliness. The main disadvantage of water-soluble formulations is the intolerance of the "freeze-thaw" cycle. With him, their basis is completely destroyed. Before buying, you should pay attention to some restrictions regarding the scope of application:

adhesives based on polyurethane are poorly compatible with Teflon and polyethylene;
acrylic and PVA-acrylate compounds are effective only on porous surfaces.

Organosoluble liquid nails are based on synthetic rubber. They are more durable, faster than water-soluble, set, demonstrate stability at temperatures below zero. Unfortunately, organosoluble formulations are not without drawbacks. First, they have a sharp unpleasant odor... Secondly, they are fire hazardous during the application / hardening period. It is permissible to work with liquid nails of this type only in well-ventilated rooms, away from electric heaters and sources of open fire.

After watching the video about liquid nails, you will definitely understand "what's what."

What are they for?

Most often, liquid nails are used for gluing wood, fiberboard, chipboard, ceramics, metal, brick structures, polystyrene, glass. They perfectly connect together even those materials that cannot fit snugly to each other. Capable of withstanding loads up to 80 kg / cm2.

If you need to glue heavy wallpaper, for example, from natural bamboo, liquid nails are your best choice... And even an unprepared surface will not be a problem: you just need to remove peeling paint or chalk plaster and you can start.

The composition is applied to the back of the wallpaper, after which it is applied to the wall and tapped with a palm. Then the wallpaper is removed in order for the glue to dry a little (up to 10 minutes). Next is produced final assembly material. If liquid nails have seeped along the edges of the canvas or between the bamboo, do not rush to remove them immediately. This will be much easier when the coating is dry.

Ceramic tiles can also be "installed" on liquid nails. The degree of reliability of such a connection will be slightly higher than that shown by traditional tile compositions. But since the price for glue liquid nails is 2-5 US dollars per tube (the standard is 310 milliliters), it is unprofitable to use the product in large volumes. With their help, it is optimal to mount the fallen tiles, to replace individual structural elements.

When gluing heavy objects to vertical planes, fix them with wooden supports until the glue seam is completely hardened. How long do liquid nails dry? Depending on the type and brand from 12 to 24 hours.

Neoprene liquid nails should be stored in a cool dry place, when using them, do not neglect protective equipment - glasses, rubber gloves.

Subtleties of choice

All recommendations on the appointment and consumption of liquid nails can be found in the instructions on the package. But, imagine, you came to the store, and there are dozens of their varieties. Rereading everything is not an easy task. What to do? Especially considering that sales consultants are not always competent - not only in small stores, but also in large building markets. Of course, pre-study the necessary information.

Quite often, customers are offered to purchase a universal neoprene-based glue - "Moment Montage extra strong" (Henkel). This is a really good choice for holding heavy liners such as metal siding, natural stone, wood, etc. But if you need to glue foam materials, for example, polystyrene, this option will not work. The best liquid nails in this case are "Moment Installation Super Strong", water-based (note that they are not suitable for gluing Teflon, polypropylene and polyethylene!).

Macco's LN601 neoprene adhesive is intended for indoor use only. Nevertheless, it is universal, since it will qualitatively and reliably glue any panels to the wall - plywood, drywall, wood, chipboard, plastic and metal moldings. Unfortunately, the LN601 is not suitable for tiling a bathroom with ceramic tiles and installing mirrors.

Neoprene-based Multi-Purpose has excellent adhesion to bricks, concrete and dry plaster. But not only construction surfaces are "on the shoulder", it is also recommended for plastic, foam, wood, ceramics, metal, chipboard and fiberboard. Multi-Purpose is not suitable only for materials used in aqueous media and polystyrene.

Memo to the master

for ceramic tiles, fast-drying water-soluble compounds such as Solvent Free or Titanium WB-50 are optimal. They are resistant to moisture and small vibrations;

for mirrors, it is better to choose those adhesives that do not contain substances that corrode amalgam - Zigger 93, LN-930, etc.;

in the bathroom, it is recommended to use compounds that are resistant to prolonged exposure to moisture, among them - Tub Surround and Nail Power;

platbands, moldings and skirting boards are conveniently mounted using quick-setting adhesives - Tigger construction adhesive, Solvent Free;

for heavy structures, Heavy Duty high-strength, LN 901, Zigger 99 are suitable.

Liquid nails: instructions

So how to glue on liquid nails correctly?

Degrease and clean surfaces.
Using a construction gun, apply the glue to the surface - with dots, mesh or snake.
Press the elements firmly together, give them the correct position and hold them that way for about two minutes.
Before exerting a mechanical effect on the structure, wait until the adhesive is completely dry (about a day).

Special pistol

For working with liquid nails, it is customary to use a special mechanical gun. Its principle of operation is similar to the principle of "functioning" of a syringe. The glue tube is placed in a special niche so that there is a pressure surface on one side and a tip on the other.

By the type of mechanism, pistols are distinguished with a reverse stroke and without a reverse stroke. The former are good for domestic use, while the latter are good for industrial use.

How to remove liquid nails?

Know How To Remove Liquid Nails For Anyone home master really very important. The fact is that this glue has high strength and it is often not so easy to give it away.

However, a number of proven ways to deal with the problem still exist.

If the composition has been applied recently, you can try to wipe it off with water / solvent and a sponge.
How to wipe off liquid nails if they have time to dry? In this case, you should resort to special cleaners, which are always present on the shelves of hardware stores.
If there is no desire and opportunity to use cleaners, it is permissible to use a scraper. True, in this case, you need to act very carefully so as not to damage the structure.

Finally, to remove liquid nails, you can try heating them. When the temperature of the medium rises to 60 degrees, the glue turns into a liquid-viscous state and is easily removed from the surface.

The Moment Montazh brand in the construction market is a whole family assembly mixtures, among which you can choose a composition for any occasion. But for an inexperienced person who faced such a variety, it is difficult to do right choice.

Each line of Moment installation products has special specifications and is designed to work with a specific type of material in specific conditions. Incorrect selection of the adhesive mixture leads to poor gluing results or material damage. The manual contains information about the typology of compatible materials.

If in technical characteristics it is indicated that the composition of liquid nails contains polyacrylate-water dispersion or polyvinyl acetate, it is suitable for gluing PVC materials.

The ability of the adhesive to react with the material to be bonded, and therefore the ability to render it unusable, depends on the type of solvent used in the mixture. On this basis, Moment Installation is divided into 2 large groups:

Liquid nails based on synthetic resins. These mixtures contain organic solvents, which are determined by a pungent odor. These substances dissolve plastic, therefore they are not used for gluing materials from PVC, foam. Such mixtures are designated MP. The main quality of the joints obtained with these adhesives is high strength and moisture resistance. Momentum liquid nails are highly flammable.
Liquid nails based on polyacrylate-water dispersion with MB designation. Chemically, this composition is neutral, therefore it is used for internal finishing works Oh. With its help, PVC panels, moldings, skirting boards are mounted.

Features of the choice of liquid nails Moment for different materials

To make life easier for the buyer and quickly guide him about choosing the right mounting adhesive, the manufacturer has broken down his products into categories, indicating the composition of the characteristics and the type of materials he is targeting:

Installation of ceramics, metal objects. All MP brands are used - "Universal", "Extra strong", "For Panels", "Instant Grip". For indoor work, use acrylic mounting nails Express MV-50.
Installation of mirrors. Special adhesive Moment Mounting MP-50 does not contain compounds that can destroy amalgam. With its help, mirrors are attached to any type of surface - wood, concrete, paint, metal. After hardening, it retains elasticity, does not shift the mirror vertically under its own weight.
Work in high humidity conditions. For installation work in bathrooms, lavatories, swimming pools, use a moisture-resistant Moment Installation of the MB-40 brand. Adhesive based on polyurethane prepolymers MF-80, cyanide-free, with sealant properties.

Using liquid nails in the bathroom

Interior finishing works. Express Decor (MB-45) is ideal for gluing styrofoam panels, skirting boards and decorative ceiling friezes, PVC. Thanks to white, the decorative element to be glued forms a single whole with the structure. The gluing seams are invisible, since after drying the glue gives minimal shrinkage.
Installation of heavy panels and large-sized structures. For these purposes, mixtures with increased primary setting values are used. Of acrylic liquid nails, this is the Super Strong Plus with a primary setting force of up to 100 kg / m 2. From rubber - "Extra strong", "For Panels" (MP-55, MP-35, respectively).

General characteristics of acrylic liquid nails

The water base makes this type of assembly mixes environmentally friendly for humans.

Polyacrylate based white adhesive

The only caveat is the danger to fish, so the remnants of unused acrylic adhesive (unpolymerized) must not be disposed of in the sewage system.

All brands of liquid nails Moment on water dispersion have common properties:

They do not have a pungent odor.
They have high adhesive properties.
With their help, not only the gluing of surfaces is performed, but also the filling of the gaps, the alignment of the unevenness of the plane.
Can be used for indoor and outdoor work. Resistant to atmospheric moisture.
The instruction allows painting with dispersed paints after drying.
Short initial hardening interval.
Correction of the position of the glued surfaces within 15 minutes after applying the composition.
Acrylic mounting nails are made in two colors: white or transparent. In the marking of transparent glue there is a capital letter "p" (Transparent MVP-70).
These adhesives are the first in the list of choice of composition for the installation of PVC products. Acrylic liquid nails do not contain aggressive reagents, and the porosity of the surface will absorb the glue, thereby increasing the bond strength.
The variety of materials that are mounted using acrylic liquid nails allows us to talk about their versatility.
When filling gaps up to 15 mm, shrinkage after drying is insignificant. When filling volumetric voids, wood or gypsum filler inserts are used.
The uncured composition is not allowed to freeze, and the operating temperature is in the range of + 5- + 35 0 C.
High initial grip strength. In each brand, this value is indicated in the name by the corresponding number.
Retain properties when stored in sealed original packaging for up to 18 months.
Packaged in tubes designed for use with a plunger pistol.

Excess water-dispersed mixtures are easily removed before hardening with a damp cloth. This is important for the cleanliness of the finishing work, so as not to spoil appearance products.

Read also:: their composition, properties and nuances of work

General characteristics of liquid nails Moment based on synthetic resins

This type of liquid nails is designed for installation work. They contain volatile substances that are harmful to health, so they work with them in rooms with good air circulation.

Rubber Liquid Nails

Rubber adhesives have the following general technical characteristics:

Often used as a sealant.
Bonds materials, panels and other structures to any type of substrate: concrete, brick, metal, wood, glass, chipboard, PVC.
The compound is moisture resistant, withstands constant contact with water.
Better than acrylates for gluing smooth and non-absorbent surfaces.
The connection is vibration-resistant due to its elasticity.
Unlike acrylic nails, liquid rubber nails have a special gluing technology. After applying the glue to the surface, they are connected and immediately separated to accelerate the evaporation of the solvent and improve the initial setting. After waiting 5-10 minutes, the surfaces are finally connected and pressed.
Some types are used for the installation of expanded polystyrene, but finishers rarely do this. Excess mixture is removed with a solvent, the likelihood of staining adjacent surfaces is high.

Features of fastening with liquid nails:

Before mounting on new concrete walls they are kept for 1 month for complete weathering of moisture and other substances released during solidification.
At installation of PVC panels on painted surfaces, they should be sanded, removing the gloss.
Liquid nails are applied with continuous rollers in the form of straight lines or a snake, 2 cm away from the edge of the panel.
Positioning time of rubber glue - 15 minutes. The panel is installed during this time. After completing the quick evaporation procedure (when using rubber glue), the panel is put back in place and a firm pressure is ensured using mechanical fasteners (staples, ties). The fasteners are removed after 24 hours.

Option for applying glue to PVC

Assembly nails are a fast and convenient alternative to the mechanical fastening of parts and structures in construction, and high aesthetics are achieved due to the absence of fasteners on the front side of the panels. - one of the most popular and affordable among all other materials of this type.

In contact with