home Visors

Covering houses with decorative panels under the stone. Pros and cons of the facade panels under the stone. Materials from which they produce panels for the stone for the basement

Reading time ≈ 9 minutes

An integral part of construction and repair works is the finish of the house outside facade panels, for example, under the stone (as in the photo). Today you can find a wide range of facing materials, the most common panel is due technical characteristics and aesthetic properties. Before ordering this option for the design for your home, it is necessary to familiarize yourself with all its features, advantages and disadvantages.

Beautifully decorated facade of a private house "under the stone"

Features of external decorative panels

Wall panels have found wide use in the processing of the outer surface of various building structures, residential buildings, country mansions and cottages, shops and shopping centers, as well as training, sports and medical institutions. Such cladding performs a number of important functions:

cheesheet construction works building;
prolongs the service life of buildings;
is a protective barrier for each wall from the effects of sunlight, sharp temperature differences, rain, snow, frost and mechanical damage;
makes the facade of the house stylish and attractive.

Sometimes the panels "under the stone" are used for cladding fences and fences on the site. Also it is also optional to cover the entire house of the whole, it is possible to separate its individual parts, inserts and elements of the walls.

Modern facade panels are visually practically different from natural materials

What are the advantages of this finishing material:

With this material, you can create a unique design of a private house, give it an impeccable appearance, aligning several different textures and textures at once, as you can see on the video.

What are the facade panels

The basis of the manufacture of panels for the facing "under the stone" is to copy the natural masonry of various shapes and volume. You can imitate different stone rocks: slate, dolomite, limestone, sandstone, buttone, granite and many others. To make the plates of realism, the surface is painted into natural colors, and also lay out in a special way to repeat the shape, drawing and face relief.

The most popular types of outdoor wall panels by type of material:

Smooth plates from PVC;
Thermopanels S. outdoor facing from clinker;
From fibrobeton (fibro-cement);
Of the steel, which has passed hot bilateral galvanizing, with a polyester in the form of finishing coating.

This species facing material Apply both for residential buildings and for commercial real estate and production facilities. Beautiful finish Houses outside the front panels "under the stone" are shown in the photo.

The combination of various textures when wearing the house with the front panels, gives a wonderful effect.

By structure, they are:

composite - in the construction of the plate there are several separate layers: inside - thermal insulation in the form of polystyrene foam as an additional artificial insulation, outside - protective decorative lining;
uniform is a flexible panel with a single-layer coating, the outer surface of which is not subject to deformation, all elements are connected to the monolithic surface of the finish. Uniform slabs have low weight and a small cost, which facilitates installation work.

The choice of plastic or metal plates is a matter of taste. The assortment of plastic panels is represented by a wide range of shades and colors, and metal structures are distinguished by increased strength and reliability.

Excellent imitation of stone and successful combination of natural shades

What is better - metal or plastic:

from plastic (PVC) - more features of imitation of various structures and texture of stone, a large number of color solutions, the panels perform a decorative function, do not protect the walls from external influences, prone deformation and damage. It is recommended to use a finish from this material only on a fenced high fence of the countryside;
metal is more durable, the decorative function is secondary. Metal panels Durable, resistant to external environmental impacts and mechanical damage.

Since various raw materials, having artificial or natural origin, apply for the manufacture of facing plates. Consider each type separately, taking into account all the features, advantages and disadvantages.

Natural stone in the finishing of the outer walls of the house looks very effectively, such a finish can be a substitute for use in the facing of natural material. Installation is usually made on a glue solution or a metal grid, the complexity and period of work is determined by the thickness of the panels and the complexity of the texture of the face surface.

Ground panels in the finish of the house under the stone

Galvanized steel facade plates

These are metal panels with a polyester coated, having a corrugated or completely smooth surface depending on the design of the facade. Separate components of the structural elements are recorded using a lock connection, which greatly simplifies and speeds up the installation work.

Main characteristics:

the thickness of the main galvanized layer is from 0.5 to 0.7 mm;
long service life;
the polymer layer is a reliable protection against mechanical damage;
the ability to select the desired shade of the finishing layer from the standard RAL palette;
the length of the individual panel can reach 6 meters;
have increased bioscistance and do not require special care;
withstand critical thermal changes;
refractory and moisture-resistant;
installation can be made vertically or horizontally;
installing the object is possible in parallel with insulation.

Steel facade panels are used to finish country buildings, country houses, cottages, townhouses, shopping complexes and sports centers. Such a lining also finds its use in the binder of the eaves, the basement of houses and pavilions.

Most often are installed to cover hinged ventilated facades of country houses.

Features:

resistant to atmospheric precipitation and corrosion;
represented wide assortment color palette;
practical to use;
available because they have the optimal cost;
an excellent solution for the reconstruction of old structures and cosmetic facade renewal;
the ability to create an original design by using combinations of various textures and elements;
lightweight structures, easy to install;
easy to care, it is easy to clean, do not damage under the influence of chemical alkaline solutions;
eco-friendly and safe for human health.

In compliance with all the rules of installation and proper care, the wall panels from plastic can serve 30 years. The disadvantage of these structures is the burnout in the sun, they are also easily amenable to various kinds of deformations, can create noise with wind vibrations and form cracks under the influence of sharp and numerous temperature differences.

Plastic panels can imitate the relief and the texture of different stone rocks, especially successfully look at the surface "under the butt or wild stone". This facade has antiseptic properties and does not absorb moisture.

This is a reliable multi-layer construction, consisting of a metal alloy (manganese, magnesium and aluminum), vapor insulation and coatings imitating natural materialIn this case, any breed of stone.

What is the feature:

C should be treated carefully and carefully, to ensure that there are no deep scratches and dents from shocks. The facade finish panels of this species is shown in the video master class.

Plastic siding

Due to its small cost and easy installation, such a covering of the facade part of the houses has become quite popular today. Allows you to finish surface surfaces, imitating texture and relief of natural natural material.

Description:

frost-resistant and reliable design;
the possibility of mounting on the uneven surface;
ability to hide all defects and cracks and native buildings;
resistance to sharp thermal changes;
it is possible to lay the sheets of thermal protection for the insulation of the house;
long service life;
panels do not require much care;
can be used both vinyl and metallic siding;
facing does not lose brightness and does not fade under the influence of ultraviolet;
you can simulate even the most complicated and intricate pattern on the stone;
vinyl finish has light weight and easy to install;
metal siding, in turn, is not amenable to deformation.

To make the design looked complete, many manufacturers produce additional elements and external angles to finish in the form of basic panels.

Polyester fiber optic coating, which allows you to solve any design and design tasks.

Specifications and features:

are suitable for any type of landscape and climatic conditions;
durability, reliability and durability;
excellent thermal insulation qualities;
have an anti-corrosion coating, which does not appear mold and fungi;
for installation, high qualifications and special construction skills will not need;
they have a slight weight.

Such products are usually made from quartz sand and cement, and cellulose fibers and mineral components are added to the composition. The front panels "under the stone" look more respectable and solid than plates imitating brick or wood.

Features:

The modern building market offers panels with a spraying in the form of a stone crumb (for example, marble), acrylic or polyurethane coating, etc. The cover of the house with a fibrocement under the stone is shown in the video.

These are panels made on the basis of clay composition in a specially equipped installation in the form of a furnace.

Description:

Laying on the facade can be done as dry (with mineral Wat), so and the wet method (the use of polystyrene foam in the form of base). Color You can choose any: all shades of brown, sand, gray, smoky and even black tones. The most unusual is considered to design walls in terracotta, malachite, white and turquoise.

A modern range of various wall trimming allows you to choose material of any configuration and design. Using the ideas of finishing the house outside the front panels "under the stone" with examples in the photo and video, you can create a gorgeous design of your home. Today there are no problems with the selection of the desired shade, texture and size, so everyone will definitely find something to their taste.

Choosing a suitable type outdoor decoration For the house - the question is not easy. The very first condition always becomes beauty, elegance and solidity of the appearance. In addition, the outer shell of the house should perform several more different functions, be durable and inexpensive.

Such conditions can put in a dead end and seem incompatible, but options that can cope with such requirements are. In fact, most of the views of the outer decoration are quite successfully coping with their tasks, but the most the optimal choice It seems the use of facade panels imitating stone masonry.

Among all types of siding, they precisely won the greatest popularity, the main reason for which is due good combination operational and decorative qualities.

Facade panels are a variety for outdoor finish at home. Another name of the material is, but it is at the moment it is not entirely correct, because the front panels have already increased from the role of a highly specialized material to a full-fledged outer coating. The initial purpose of the material was finishing the lower part of the house, more precisely, the visible outdoor part of the foundation.

At the same time, the auxiliary material turned out to be quite capable of fulfilling the main task, and - on a higher decorative level. Aesthetic level of the sheat ground Siding significantly higher than the traditional, it is recognized by all users.

The reason for such a situation was the drawing of panels, more precisely - imitation of brick or masonry, which they perform. The level of invoice and color is very high, since most often part of the natural masonry from one or another type of stone or bricks, from which the cast is made for the casting form.

As a material for the manufacture of facade panels, uses:

Acrylic. etc.

The most common polypropylene and vinyl samples, as they have the optimal value for money are the optimal ratio. The strongest property determining the high demand was the high quality imitation of the stone wall. The realism of execution is such that even close to determine, naturally is a material or copy. If we consider that the price of the facade panels is many times less than that of natural samples of the finishing stone, then the reasons for popularity becomes clear.

In the manufacture, the surface is repeated a certain type of finishing stone:

Granite.
Bound stone.
Slate.
Sandstone.
Dolomite.
Planic, etc.

Samples of imitation of a particular rock of the stone there are many, and each of them has a lot of color options - from light to dark. In total, a rather impressive range of panels is obtained, the choice is so wide that it requires some time on simple familiarization with all offers. In this, the facade panels have significantly ahead of traditional types of siding, which cannot boast such a variety of colors and textures.

Advantages and disadvantages

The advantages of the facade panels are:

High realistic imitation of natural materials.
Wide choose Options for texture and color.
More convenient for installation size than normal types of siding.
Small weight (light), not overloading bearing structures (except for fibro-cement materials).
About low price (Does not apply to fibro-cement samples).
Savory for atmospheric manifestations, ultraviolet rays, low temperatures.
It does not appear mold, fungus, the material is not subject to rotting.
Easy installation, the ability to independently perform installation.
There is no need to care.
Long service life.

The disadvantages include:

For fibro-cement samples - high prices, high weight panels.
Plastic types of material become fragile at low temperatures.
High expansion coefficient when heated, which requires the execution of certain requirements when installed.

Different types source material Our own pros and cons, peculiar only to certain types of facade panels and atypical for everyone else.

Specifications and sizes

Specifications depend on the material, so numerical dimensions may have significant discrepancies:

Length - 1-1.25 m. (Some species can have up to 6 m panel lengths).
Width - 0.45 m (there are samples with a width of 0.26 m).
Thickness - 1-1.2 mm (fibro-cement panels have 6-12 mm thickness).
The temperature range during operation - from -50 ° to + 60 °.
Service life - on average, manufacturers declare 50 years, although these data have a purely declarative nature, there are no practical confirmation capabilities today.

Types of facade panels for stone

Each manufacturer has an impressive list of varieties of facade panels under the stone. Many of them are similar to each other, but never completely repeated. There are some discrepancies in size or configuration, but the main variety is the rock of the stone that is repeated with the skin.

At the same time, often the name of a specific line is called, only indirectly named material, for example:

Rocky stone.
Wild stone.
Canyon.
Naples stone.
Fake diamond.
Stone Florentine, etc.

This position is caused by a large number of similar samples in need of their own non-repetitive names to avoid confusion.

Moreover, different materialsFrom which panels are manufactured, bring their own properties that allocate this type of facade panels among the like. Thus, fibro-cement and vinyl samples differ significantly from each other, which also gives grounds to calculate them to different subgroups.

Main firms manufacturers

The high demand and popularity of the material is largely due to mass production. Of the most famous firms engaged in the manufacture of wall panels under the stone, you can call:

Holzplast.
Fineber.
Nordside.
Technosta.
Dolomite.
Yu-Plast.
Alta profile, etc.

The full list of manufacturers is too wide and is constantly increasing, it makes no sense to bring it. The listed firms are the most famous, their products have all the necessary certificates and fully complies with modern technical and sanitary requirements, so when choosing a material, first of all, you should navigate to these brands.

Installation of crates

The siding shap is a carrier design. It performs several important functions:

Serves as a support for the trim.
Allows you to combine the insulation and the trim.
Provides ventilation gap.

There are options for installation directly on the wall, without a crate, but such methods are not typical and serve exclusively for decorative purposes.

To create the crates are used:

Wooden bars.
Metal guides.
Specialized designs manufactured under certain types of panels.

By the ratio of price and quality, metal guides are leading, which are suitable for any type of panels.

The order of installation of the crate:

Cleaning Wall surfaces from foreign objects, sealing problem areas, primer. In difficult cases - complete shuttering of the wall.
Marking, Definition of installation points of direct suspension (brackets).
Installation of suspensions. Laying insulation and waterproofing layer.
Installation of slats of the crate on top of the insulation. It is made on protruding petals of suspensions. It is necessary to make careful control of the position of the planks so that they formed as much as possible plane.

If the insulation thickness does not allow one layer of slats - lacks the length of the petals of the suspension, then the installation of two layers is made:

After installing the brackets, the first layer of the crate is made. The direction of the planks corresponds to the position of the facade panels, the distance from the wall to the top point should be no less than the thickness of the insulation.
The insulation is installed between the lamps of the crate.
The first layer of slats in the transverse direction is established a counterclaim - a second layer combining the functions of the supporting structure and the ventilation gap.

The second method is less economical, but the need for correct and effective insulation The house has a primary priority, so always guided by considerations of exploitation, and not economy.

How to fasten the panels

For fastening panels or component elements are used nails or, more often, selflessness. They must have a protective coating that protect fasteners from corrosion. Usually used galvanized screws.

The installation of the panels is made according to the rules, the observance of which is mandatory - otherwise the geometry of the casing will be broken or its destruction will occur.

Basic condition proper Installation is the observance of thermal gaps. The change in the linear dimensions of the material under the influence of temperature, which during one day can significantly increase or decrease, causes the need to ensure a certain space compensating for excess volume when heated.

When installing the material, the following conditions must be observed:

The longitudinal docking of any elements or installation in the grooves of challenges is not done close, but with a gap from 3 mm in summer time up to 6 mm in winter.
Self-tapping screws no longer, I need a small (1 mm) gap so that all the elements have the ability to move freely when expanding or cooling.
The installation of self-tapping screws is performed perpendicular to the supporting surface exactly in the center of the oval holes, this will allow the elements of the casing to move freely in the desired side.

Instructions for finishing

How to see the house with facade panels? The procedure for facing the following (photo below):

Installation of the starting plank. To do this, note the horizontal line, which will denote the lower edge of the canvas. It uses the starting plank. We must not forget about temperature gaps and a loose fastening of self-tapping screws.

NOTE!

Some types facing panels Do not need a starting bar. For such species, it serves as only an even reference line, which after mounting the first row of panels is removed.

Then the installation of angular planks. They are installed on the outer corners of the house and around the perimeter of the window and door openings. Doblyo elements are used, corresponding to the main panels or, as an option that have differences in color, texture and drawing, which makes an additional decorative effect.
Installation of external panels begins with the lower left corner (usually). The first panel is cut by vertical to form a level edge, which is necessary for installation in the groove of the corner panel. Fixation is made in the lock lock lock, the upper part is attached to self-reserves in the oblong holes of the nail strip.
The following panels are fixed in accordance with constructive features - Usually the subsequent panel is inserted into the special nests of the previous one to maximize the side joint and make it inconspicuous. The lower part is fixed in the starting bar, the top is attached to the self-tapping screw.

Similarly, all the following panels are attached until the installation in the opposite corner profile. To do this, the edge of the corner panel cuts into the desired length, is inserted with one end in the nest of the previous panel, the other in the grooves of the angular profile. The lower part, as usual, snaps into the lock lock, the top is attached by self-drawing.
The following rows of panels are set in a similar way., Only instead of the starting plank uses the bottom panels lock.
Completes the cloth Installation J-Plankmaking up the upper cut of the end of the panels.

Useful video

Video instructions for finishing the facade with decorative panels:

Conclusion

The facade panels under the stone are one of the most attractive and spectacular species of the outer sheath, which performs in addition to the function of protection of wall materials from atmospheric manifestations and conducive steam output from under the trim. With all the qualities of the material, the cost and procedure of the installation are quite accessible to all and allow you to perform work with your own hands, not attracting expensive specialists.

Panels have a large selection of drawing, color Gamma.allow you to use combinations of two or more colors, forming original options House design. The popularity and demand for such a material is steadily growing, manufacturers update the range, develop new variants of drawing, colors and textures of panels. The front panels under the stone constitute a serious competition to traditional siding, in many respects overtaking it and confidently occupying a leading position among finishing materials.

In contact with

There is a large variety of materials for cladding and decorating house facades. Natural stone is popular with popularity. Facing the facade of the house with plastic panels under the stone look expensive and beautiful. Such a design, as shown in the photo below, will fit into any natural and urban environment.

Types of materials

The design of the stone will be appropriate only for new houses, as the stone is very heavy and the design of old houses may not withstand such installation.

Stone designs are made from various materials. It can be wood, plastic, cement structures, as well as products from combined structures.
Currently enjoyed plastic panels, as they have good operational properties and affordable price category.

Designs serve not only to decorate the facade, but also protect it from negative natural impacts. Also significantly extended the service life of the structure and the carriers of the structures from moisture, cold. Panels do not allow noise penetration from the external environment.

For facing the facade of the house, panels having a thickness are two times more than the wall panels. Such thickness contributes to withstanding natural impacts. Also, the facade panels have a pattern of a large, natural, natural stone that has a saturated color.

Facing materials are the following types:

Siding.
Metal constructions.

From the finish type, the properties of houses, parameters of operation, as well as its durability and practicality are dependent.

Two types of products with imitation stone for facing at home:

Made from PVC single-layer panels.
Combined, functional, two-layer panels.

The second type of panel is very practical and perform two functions:

facade protection;
wall insulation.

It is reasonable to set the second type of panels, as it saves the time that will be required for a separate insulation and of course saving money.

For materials used the following types of simulations:

under the brown stone;
imit textiles;
under the tested stone;
mosaic;
under natural stone;
under concrete.

Features of plastic panels

Installation of structures has a number of significant advantages:

Ease - do not create loads on the facade.
Stands in mechanical influences.
After carrying out the cladding, the building acquires an improved view.
A wide selection of panels of different in their design idea.
Constructions do not require additional care.
Panels can be installed independently when adhere to the desired technology.
When installing, specialized equipment is required, since the lungs panels.
Quality quality and price.
The facade, lined with panels, will serve for a long time.
When damaged it is very easy to repair.
Availability - in all stores you can find similar products.

In addition to the advantages there are negative countries:

difficulties may occur when selecting the color, since there is a huge amount of suturing gamma;
panels in the presence of fire are starting to melt;
the burnout in the sun is also a negative factor.

How to make a cladding

When implementing self-installing panels, you need to have the appropriate devices: roulettes, level, drill, hammer and others.
Before installation, surface preparation is carried out. It should not be dusty and even. In cases where the base is wooden to be treated with specialized means from insects.

Installation is carried out in three actions:

Preparatory stage.
Frame fixing.
Main installation.

Products are fixed on starting and finishing profiles. Consider the total installation process for all types:

At the first stage, the first design is fixed to the starting base in the lower corner.
Each subsequent products are attached from left to right, the row form up upwards.
The first base is fixed with a screw, the rest are snapped with a vertical retainer.
Must with screws.
Materials have the same pattern. For giving natural species It is necessary to shift them.
You can make repairs at any temperature, but it is not recommended to do it below -5 degrees.
It is recommended to purchase the design of one brand, since each company uses different sheet sizes.

The design of the building with a natural stone is well combined with metal products, trees.

The price of the panels depends on the type and functional features of the material. Shown in the photo facing the facade house with plastic panels under the stone is well combined with landscape design Plot.

Private houses decorated by panels from stony masonry will certainly attract attention to the streets. When using several colors, the individuality of the building is emphasized. So finishing in gray-green tones will create a Scandinavian style. Traditional is a color gamut of pastel tones. In the woody landscape, cottages will perfectly fit, which have dark cladding.

The panel under the stone will be an excellent addition to the overall design of the territory of the house, as well as one of the economical options at the design of the house. Panels give home naturalness and natural.

After construction, the house cannot be left in this state. It will take external wall decoration. It is designed not only to improve the appearance, but also provide some protective functions. Making facing with natural stone is very expensive, but the appearance will be awesome.

There is one more solution that will cost much cheaper, but it is unlikely that someone can see the catch. It is carried out using decorative. What best to choose and what are they good? The discussion of these moments is dedicated to the article.

Than good

Facade finishing with natural stone can take not just days, but for whole months. This is due to some complexity of technology and a selection of required components. If we talk about panels, then the whole process is very quick. This is explained by the modular design of the panels. When installing such decorative panels there are no special requirements for weather conditions. Rather, we are talking about the comfort of the master itself.

For some species of natural stone, only dry and warm weather is required. Otherwise, he over time simply fall off. Cutting panels occurs without a large amount of dust. With natural stone, such a number will not pass. Cleaning after its laying is a good time article. Some types of panels do not require the use of glue.

With regard to decorative panels there are no special requirements for what state is the wall of the house and what it is made from what it is. Often panels are made of polymeric materials. They have a slight weight, which means they will not have loads both on the walls themselves and the foundation. Corner treatment delivers one pleasure. Typically, the manufacturer provides additional modules for panels that do not require a scrupulous output of angles. Another plus of some decorative panels is an additional sound insulation that they provide living in the house.

Requirements for panels

Although many are guided exclusively external species When choosing a material for finishing, but this is not the only purpose of it. Another factor is that the protective properties have panels. They must be capable of compensating for sharp fluctuations in temperature, as well as provide protection against moisture penetration. This is especially true of the structures that are collected by the frame method, of wood or from another hygroscopic material. Other an important pointwhich can be decisive when choosing panels for exterior decoration It is how they will behave when exposed to open fire. Some products are made using a underlining lining material that can instantly flare up.

It would be unpleasant if after a while the color of the panels was sweetened or burned out at all. That is why they must have resistant to ultraviolet rays. Such products do not require special maintenance and perfectly cleaned with water. Modules must be fixed in such a way that the wall surface can be freely ventilated. This will make it possible to eliminate the formation of condensate and the growth of fungus.

Types of panels

To do best choiceIt is necessary to understand well what kinds there are decorative panels for the exterior decoration. The main types of modules with their features will be listed below.

Under brick

Many elite houses are decorative bricks today. It looks just wonderful. But many stops the figure that turns out after calculations only for the purchase of material. If you consider delivery, additional materials And the service of the master, then just becomes bad. The solution will be the use of finishing panels that have a drawing, which is almost impossible to distinguish from real bricks. This is possible only with very close examination, and sometimes just tactile. The cost of such panels is several times cheaper. According to mine qualitative characteristics Modules for facing brick are practically not inferior.

This rather large group is divided into two main subspecies. One of them implies the presence of modules with a homogeneous structure, and the other with the combined one. The difference concerns the cake layers from which modules are made. Additional structure involves the presence of a fixed insulation, which eliminates its additional purchase. If the house is already insulated with foam or inferno, then modules with a homogeneous structure are suitable, which can simply be mounted on top of the insulation. Some types of modules with insulation are fixed by the hot method without the use of classic glue or solutions.

Facade modules for external finish with a picture of a brick significantly reduce the facing time. Bricks need to be laid in rows, and on one module there are already several rows. The material from which they are made can easily carry even harsh winters. Some types of bricks over time accumulate salt from rainwater, which protrudes white spots. As a rule, they wash them quite difficult or impossible. With regard to the modules for finishing such a problem is not observed. Many stop their choice on the combined panels, since two tasks at once performed at once. An example of mounting such modules can be viewed on the video below.

Tip! Facade modules that are decorated for a brick can be used not only for wall decoration. Someone acquires them for fences or other buildings. They perform their function as well as on the building.

Under a stone

It is difficult to find a person who would not like finishing with natural stone. The "savage" stone acquired great popularity. It does not require any service and is ready to stand in centuries. But everything rests on the price. Panels for natural stone are similar in their structure with those that are performed under the lining brick. They can also be with or without insulation. The front side is most often performed from polymeric materials.

Facing modules do not lose their color in the sun and do not crack in the cold. Installation of such external cladding panels can be made in two ways. The first one implies the use of a special crate, which is attached to the wall. And the second is direct contact with the wall through glue. The latter is more suitable when the walls are perfect. If they need to be aligned a little, then it is better to mount on the crate.

Note!Facing modules under stone often have non-standard and wrong shape. This is an important factor that allows you to achieve maximum conformity with natural stone.

The price of such finishing panels is quite democratic. The effect on its formation can have the size of the module, its shape, thickness, as well as color. Mounting work Do not require ideal weather conditions. Elementary construction skills are usually enough to perform work independently. They can be used both to finish the plane of the walls and the base level.

Under clinker tiles

Clinker tile has already managed to love many owners. It has a pleasant appearance. Most often it is made with a soft color without pesting inclusions. It allows you to create a calm atmosphere. Tile has good characteristics With regard to the conservation of heat. The finished product perfectly transfers sharp temperatures. In addition, it is rather durable. It does not lose its properties when used on panels for finishing facades. The method of manufacturing such panels is very interesting. Tile is laid out on a special base and poured insulation, which then acquires the required parameters.

The panels are powered by environmentally friendly, because the insulation itself does not have harmful discharge, and the tile is made of natural clay, without third-party impurities. The sun rays are not able to make the tint tile dim. Facing panels also perfectly carry physical impact. The price of such modules is slightly higher than other options. This is explained by the cost of the clinker tile itself, since it is a natural component. Even with high humidity, fungus and mold do not appear on such panels. Pores in the tile are practically absent, so it does not absorb moisture.

Another name for facing modules from clinker tiles - thermopanels. This is due to the use of one of the best insulation. It is not a penplex, but polyurethane. The latter does not ignite with open fire, it can melt, but no more. Installation of such panels can occur in the fastening method or directly onto the walls. Thanks to clear lines on such finishing modules, it is very easy to withstand the specified level and install yourself. Clapping panels with clinker tiles may not necessarily be smooth. Some types of tiles that are used for cladding modules has some relief.

Note!Although the clinker tiles and is resistant to physical influences, but from strong blows can be burst and crumble. It is worth considering, choosing the places of fastening such a cladding. If one tile is damaged, the entire panel will lose appearance.

Prior to the start of installation of facing panels with clinker tiles, it is necessary to take care of high-quality surface preparation. Walls must be sage and processed by antiseptic composition. If they have old paint., it must be removed. There is always an option to install on the frame, which will simplify the task. Such facing panels are ready for service for decades. At the same time, it will always look like new ones.

Fiber cement

From the title it becomes clear that such facing panels are made of cement with the addition of certain fibers. Most of the solution for the manufacture is plaster. It is mixed with special granules that control the moisture content of the material itself. The protective layer is on both sides of such a panel for facing. It is quite durable, so it is designed for a long service life. Consistent temperature differences do not affect the shape of fibro-cement panels. Such panels for the exterior decoration are quite stable. Their plus is the resistance to fire.

Such decorative panels for exterior decoration can be performed under the stone. They do not have harmful discharge, which is important for those families where there are children. A large variety of pigments can be added to facing modules, which creates unique color solutions. They can also be painted. But for the paint for such facing panels will have to post a round sum. The price affects not only the color, but also the drawing implemented on them. Thickness can also be different, which will affect the cost of the panels for the exterior trim. Some options for cladding modules have special brackets, which facilitates their installation. The composition formula for the production of panels is kept secret by each manufacturer.

Note!You should be attentive when choosing such facing panels for locations in which rains often come increased humidity. Modules may be slightly deformed in such conditions.

Conclusion

As can be seen, the house cladding modules are a very profitable solution both with aesthetic and from a practical point of view. If under the panel with insulation, mount another series of insulation, then in the cold season you have to spend less means on heating. Panels for finishing can be combined. For example, the main plane of the wall can be performed using one type of modules, and the basement is facing the other.

During the construction of the crate for decorative modules, experts advise to comply with the required step of the planks. This will allow to protect the modules from damage due to pushing. Some types of facing are attached, starting not with the modules themselves, but from corner slats and others additional elements. Typically, the manufacturer specifies this in the instructions for a specific product.

Making repairs in the house, one of the important stages is considered to finish the walls outside. Now quite common modern materialswho decorate the house. At the same time, they are not only an ornament, but also serve as protection against various negative factors of the external environment. And almost all building materials for facade finish At home, show the thermal effect and have good sound insulation.

Wide choose

The construction market will offer a lot of options for facing facades, all of them will differ in their properties and prices. For example, the panels from natural materials will cost an order of magnitude higher than the panels of artificial materials.

Metal

Produce aluminum or galvanized steel panels. Also, the surface is made or perforated, or smooth. Metal panels have a protective coating. On 1. square meter Panel weight will be about 9 kg, that is, you should take into account the load on the foundation. It will be important to note that metal belongs to.

One of the finishes options are leaf wall panels for the bathroom, which can be found in this

Aluminum panels are considered the easiest. And the advantage of steel panels is that they are very well reacting to the strength differences of temperatures, and can be operated in extreme conditions for our heights. Advantages of metal panels:

durable - the service life is about 30 years;
moistureproof;
can freeze and deteriorate about 50 times;
fireproof;
not affected by corrosion.

Such a finish option as a wall panel for finishing a corridor can be seen here.

price;

difficulties when installing.

Learn more O. wall panels Under the brick for the exterior finish, you can find out here in this

Sandwich Samples

If you are faced with the task not only to decorate the walls of the house, but also insulate it, then you should look at the sandwich panels. They in their composition have several layers of insulation. Also in the composition there is a vaporizolation layer, plastic and metal. The panel of this type is well tolerated the temperature difference and have good sound insulation properties. To select a suitable sandwich panel you need to know. Usually the panels are attached using self-tapping screws. But if the base of the wall is concrete, then you should turn to dowels. Advantages:

Disadvantages of panels:

wounds when installing and further operation;
damage to the coating occurs when inaccurate circulation;
warves on the junctions if the temperature drops below -20 degrees.

You can find out what sizes of MDF panels for walls can be used during construction or repair.

PVC

The second name that is more widespread in the masses is. Often it is used when finished inside the house. This is justified by the fact that it is easy to use, it is well cleaned. Even with an outer decoration, he fully justifies himself. It is frost-resistant, at high and low temperatures is not deformed. If you want to use the usual PVC wall In the outer decoration, in the end, this will lead to the fact that they simply will not stand the effects of ultraviolet. Therefore, now we produce lining, which is resistant to the effects of the Sun. This is done by adding some components and coatings of varnish.

Eopan

Ecopan - Sippar. Usually the building is completely erected from this material. They consist of chipboard, The thickness of them is not more than 10 mm. The composition includes insulation polystyrene foam. There is a lot of positive sides of Ecopean. First of all, this is the price. From such panels in many countries build houses. What are the benefits of Ecopan?

Decorative

This type of panels are distributed, has a lot of finishing options. Separately, you can choose already for interior decoration.

Under brick. Processing the wall with panels under the brick, you can look at your home in a new way. Such material speaks of your good taste. But it is worth knowing that such a material will cost you quite expensive. The panels themselves are expensive, plus you need to use the styling material and the work of the master. If you compare decorative and stone and panels, then, of course, the panels will cost you much cheaper. You can find some differences only if you close to the house. Nobody will notice from afar that the walls are covered with panels. There are two types of panels: with a combined structure and homogeneous. In the combined structure there is a layer of insulation. Usually they are polystyrene foam. Facade panels are fixed with a hot connection. In this case, it is more efficient than glue. The advantage of panels in front of the brick is that they can be laid in any weather conditions. And about how the interior decoration is happening in our article.
Under a stone. Using natural brick in the finish, know that a good amount of money will be required. Therefore, the panels under the brick will be good option For replacement. Very expensive and beautiful will look at your home. In terms of its characteristics, they look like a panel under the brick. Combined panels also have a layer of insulation, the second layer acts as decorative element. You can lay panels using a special adhesive or metal facing. At the same time, metal profiles need to be installed in advance. The price of the panels will depend on the thickness of the panels, color, from the material from which they were made. Panel weight is very small, and you can install them yourself.
Clinker. The main component becomes clinker tiles. Initially, the tile was made to lay papillary tracks. But in the process of observations, it was noticed that it was durable, perfectly tolerate the temperature difference and retains heat. Soon it began to apply to finishing facades. Such panels prevent mold and fungi appearance.

The base due to different colors and textures can be made very attractive and interesting. When installing it is worth considering that it is necessary to make additional and thermal insulation, and waterproofing.Laying panels, do this at a temperature not lower than 0. Only the self-tapping screw or nails will help in the installation.

Manufacturers

On video - insulated facade panels for outdoor finish at home:

When using facade panels, you give it the second life. It will become attractive and will stand out from the total mass. You can choose the panels that are suitable in texture and color for your home. You can also pick up and suitable for yourself.