Operating principle poplar m 14 zota. Related documents and information materials

Steel solid fuel boiler of the Zota "Topol-M" series with convenient vertical loading. Options: heating element 3...9 kW, 2", draft regulator, gas or pellet burner, automatic fan. Operating water pressure - 3 atm, volume 46 l. Dimensions (H*W*D), mm: 845*440* 875. Weight 113 kg. Firebox volume 38 l. Firebox depth 38 cm. Water connection size 1 1/2" no.

About Zota “Topol-M” boilers

The new line consists of power boilers. 14, 20, 30 and 42 kW. The boiler body has become thermally insulated and more gas-tight. Boiler water jacket under decorative cladding now covered with basalt cardboard, which significantly reduced heat loss. The fire door opens in a horizontal rather than vertical plane and is locked with a lock. The ash pan door is equipped with a blower damper, which is adjusted manually using a screw or controlled by a mechanical draft regulator, which is installed as an option. Thus, the increased gas density of the boiler makes it possible to more accurately regulate the oxygen supply and extend the fuel combustion cycle on one load to 10-12 hours.

The combustion chamber has undergone changes: an additional horizontally located heat exchanger in combination with a removable damper makes the gas duct three-pass. This increases the heat transfer area and improves heat transfer efficiency. The damper is made removable specifically for cleaning the heat exchanger.

Fuel

  • anthracite;
  • brown coal;
  • firewood 380-640 mm;
  • pellets (optional);
  • natural or liquefied gas (optional).

Operating time on one load

Up to 12 hours of continuous operation.

Operating pressure

Withstands constant pressure of 3 atm.

Firebox parameters

Peculiarities

  • The boiler body under the decorative casing is insulated with balsat cardboard. This feature reduces heat loss from the water jacket.
  • Two fuel loading options. A horizontal door will be convenient for top loading of coal and access to the heat exchanger when cleaning the boiler, and a horizontal door will be suitable for loading firewood.
  • The heat exchanger consists of three circuits. A tubular heat exchanger in combination with a removable damper creates a three-pass heat exchanger. The design allows for more efficient heat removal from the exhaust flue gases, thereby increasing efficiency.
  • A thermomanometer is installed on the front panel, showing the water supply temperature and pressure inside the boiler.
  • Gas or pellet fuel can be used as a heat source. To do this, you need to install a suitable burner.
  • Electricity can be used as an auxiliary heat source. For this purpose, stainless steel heaters (heaters) are installed in the boiler;

  • To achieve greater efficiency from the combusted fuel, the boiler can be equipped with a “TurboSet” pressurization fan. The fan will blow air onto the fuel particles that rise with the flue gases. The particles will burn out in the boiler.
  • The water jacket is located along the entire contour of the boiler, including under the ash pan. The design cools the ash box, prevents it from deforming, provides additional heat removal and improved coolant circulation.

Additional components

The heating solid fuel boiler ZOTA Topol-M14 is designed to operate in heating systems with a working pressure of up to 3 atmospheres, used for heating residential and industrial premises.

Features of the ZOTA Topol-M14 boiler:

  • Gas-tight, thermally insulated housing
  • The water jacket of the boiler under the decorative casing is covered with basalt cardboard to reduce heat loss
  • The fire door opens horizontally and is locked with a lock
  • The ash pan door is equipped with a blower damper, which is adjusted manually using a screw or controlled by a mechanical draft regulator, which is installed as an option.

Thus, the high gas density of the boiler makes it possible to more accurately regulate the oxygen supply and extend the fuel combustion cycle on one load to 10-12 hours.

New combustion chamber: an additional horizontal heat exchanger in combination with a removable damper makes the gas duct a three-pass one. This increases the heat transfer area and improves heat transfer efficiency.

The damper is made removable specifically for cleaning the heat exchanger. In addition, there is a cleaning hatch on the flue, which makes it easy to remove soot.

A thermometer is installed on the top panel of the boiler to measure the temperature of the water supply. Topol M uses coal and wood as fuel. As an alternative, electric heating is possible, which is provided by a built-in heating element with an external control panel (installed upon request and is an option). It is also possible to install gas burner in place of the screw door.

The presence of a screw door creates additional convenience for loading firewood into the firebox. The depth of the firebox is from 38 to 58 cm. A separate ash door allows you to remove ash at any time while the boiler is firing. For user convenience, new ergonomic handles are installed on all three doors.

Due to the design features of the fuel combustion chamber, increased gas density and workmanship, the Topol M series of boilers has the most high efficiency among budget models of solid fuel and combined boilers.

Design of solid fuel BOILER ZOTA TOPOL-M14:


  1. Heat exchanger
  2. Air supply channel
  3. Water jacket
  4. Hole plug for heating element
  5. Kolosknik
  6. Screw grid
  7. ash drawer
  8. Primary air damper
  9. Choke adjustment knob
  10. DoorBlower door
  11. The door is screwed
  12. Front casing
  13. Loading door
  1. Thermometer
  2. Damper for cleaning the heat exchanger
  3. Hole for temperature sensor
  4. Household casing
  5. Fruit pipe
  6. Upper casing
  7. Traction regulator
  8. Processing pipe
  9. Ground bolt
  10. Drain pipe
  11. Exhaust pipe
  12. Chimney damper

Scheme of flue gas removal in the ZOTA Topol-M boiler


Instructions and certificates

Power

  • Thermal power 14 kW
  • Efficiency 75%

Smoke removal

  • Chimney diameter 150 mm
  • Chimney dimensions, inch 150
  • Height chimney, m 6 m
  • Chimney cross-section, sq.cm 200 sq.cm

Fuel consumption

  • Fuel consumption, kg/h anthracite: 2.2/brown coal: 4.2/wood: 5.6

Connection and installation

  • Installation type Floor standing
  • Connecting dimensions, inch 1 1/2

Design features

  • Loading chamber volume, l 38

Specifications

  • Fuel type: Firewood, Coal
  • Number of circuits Single-circuit
  • Solid fuel boiler material Steel

Dimensions and weight

  • Firebox depth, mm 380 mm
  • Height 690 mm
  • Width 440 mm
  • Depth 845 mm
  • Weight 113 kg

Main characteristics

  • Heating area, m2 140 m2
  • Control type 3
  • Volume of the water chamber of the device, l 22 kg
  • Possibility of installing a burner Gas, Diesel
  • Volume of combustion space, m3 0.038 m3
  • Product description

    The Topol-M series of solid fuel boilers is represented by models with a power from 14 to 80 kW, which makes these compact boilers suitable not only for houses and cottages, but also for industrial premises.

    The Topol-M body is designed to maximize heat transfer, extend the burning time with one load to 12 hours and reduce heat loss during boiler operation:

    • Increased gas density;
    • A heat-insulating layer of basalt cardboard is hidden under the skin;
    • Lockable horizontal combustion door;
    • Precise adjustment of oxygen supply (when installing a draft regulator);
    • Additional horizontal heat exchanger;

    There is a thermometer at the top of the boiler to monitor temperature parameters, and a removable damper and cleaning hatch allow you to easily remove soot and clean the heat exchanger and flue. The boiler also has a separate ash door, which allows you to remove soot even while the boiler is firing.

    Topol-M boilers use coal and wood as fuel, however, all models can also be equipped with a heating element unit and a gas burner, which allows the use of gas or electricity as an alternative fuel. The boiler body already has compartments for installing heating elements and a temperature sensor.

    Feature of the Topol-M series

    • Convenient loading chamber. Front-camera combustion is designed for efficient combustion of a sufficient amount of coal and firewood.
    • Ability to operate on any fuel. In the standard version, all boilers operate on wood and coal, however, each boiler can be equipped with a heating element unit, with which the boiler will operate using electricity. It is also possible to use gas as fuel when installing a gas burner.
    • High efficiency. Models in this series have the highest efficiency among budget models due to their design.

    Advantages of solid fuel boilers of the ZOTA “Topol-M” series

    • The boiler body has become thermally insulated and more gas-tight. The water jacket of the boiler under the decorative casing is now covered with basalt cardboard, which has significantly reduced heat loss. The fire door opens in a horizontal rather than vertical plane and is locked with a lock. The ash pan door is equipped with a blower damper, which is adjusted manually using a screw or controlled by a mechanical draft regulator, which is installed as an option. Thus, the increased gas density of the boiler makes it possible to more accurately regulate the oxygen supply and extend the fuel combustion cycle on one load to 10-12 hours.
    • the combustion chamber has undergone changes: an additional horizontally located heat exchanger in combination with a removable damper makes the gas duct a three-pass one. This increases the heat transfer area and improves heat transfer efficiency. The damper is made removable specifically for cleaning the heat exchanger. In addition, there is a cleaning hatch on the flue, which makes it easy to remove soot.
    • A thermometer is installed on the top panel of the boiler to measure the temperature of the water supply.
    • Topol M uses coal and wood as fuel. As an alternative, electric heating is possible, which is provided by a built-in heating element with an external control panel (installed upon request and is an option). It is also possible to install a gas burner in place of the screw door. In addition, the presence of a screw door creates additional convenience for loading firewood into the firebox. The depth of the firebox ranges from 38 to 58 cm. A separate ash door allows you to remove ash at any time while the boiler is firing. For user convenience, new ergonomic handles are installed on all three doors.
    • Due to the design features of the fuel combustion chamber, increased gas density and quality of workmanship, the Topol M series of boilers has the highest efficiency among budget models of solid fuel and combined boilers.
    • Possibility of additional installation "TENB 2" kit.

    Contents of delivery:

    Chimney pipe 1 pc.
    Wheel grill: 200x300 mm 1 pc.
    Ash box 1 pc.
    Scoop 1 pc.
    Poker 1 pc.
    Screw 1 pc.
    Instruction manual 1 pc.

    Description

    The solid fuel heating boiler "Topol M" is a modification of the boiler "Topol". It is designed to work in autonomous heating systems with a working pressure of up to 3 atmospheres and can be used for heating residential and industrial premises.

    The new line has been expanded and consists of five boilers 14, 20, 30, 42 and 60 kW. There are many differences from the previous model and they are quite significant. The first thing that catches your eye is the new design. The rest is less noticeable, but much more important.

    Advantages of solid fuel boilers of the ZOTA “Topol-M” series

    • The boiler body has become thermally insulated and more gas-tight. The water jacket of the boiler under the decorative casing is now covered with basalt cardboard, which has significantly reduced heat loss. The fire door opens in a horizontal rather than vertical plane and is locked with a lock. The ash pan door is equipped with a blower damper, which is adjusted manually using a screw or controlled by a mechanical draft regulator, which is installed as an option. Thus, the increased gas density of the boiler makes it possible to more accurately regulate the oxygen supply and extend the fuel combustion cycle on one load to 10-12 hours.
    • The combustion chamber has undergone changes: an additional horizontally located heat exchanger in combination with a removable damper makes the gas duct three-pass. This increases the heat transfer area and improves heat transfer efficiency. The damper is made removable specifically for cleaning the heat exchanger. In addition, there is a cleaning hatch on the flue, which makes it easy to remove soot.
    • A thermometer is installed on the top panel of the boiler to measure the temperature of the water supply.
    • Topol M uses coal and wood as fuel. As an alternative, electric heating is possible, which is provided by a built-in heating element with an external control panel (installed upon request and is an option). It is also possible to install a gas burner in place of the screw door. In addition, the presence of a screw door creates additional convenience for loading firewood into the firebox. The depth of the firebox ranges from 38 to 58 cm. A separate ash door allows you to remove ash at any time while the boiler is firing. For user convenience, new ergonomic handles are installed on all three doors.
    • Due to the design features of the fuel combustion chamber, increased gas density and workmanship, the Topol M series of boilers has the highest efficiency among budget models of solid fuel and combined boilers.
    • Possibility of additional installation "TENB 2" kit.