home Visors

DIY ottoman made from old things: step-by-step instructions for those who want to save money. How and from what you can make an ottoman with your own hands Making an ottoman with your own hands

To update the design of your home, use additional pieces of furniture, which include homemade ottomans. Compared to factory ones, they have great advantages: due to their size, poufs are mobile, as well as multifunctional and lightweight interior elements. To make them, you can use various available materials found in your home and choose the type of upholstery, color, shape, size yourself. In the end, such a product will cost almost no investment.

You will learn how to make an ottoman with your own hands from this material, and beautiful photos and the video instructions at the end of the article will make your task easier.

A simple way to make soft poufs

We often don’t have enough time and desire to deal with patterns, so soft ottomans can be made like this:

We cut out two circles from the fabric, which in diameter should be the same as the diameter of the bottom and top of the product. Be sure to leave seam allowances;
Next, we cut out two identical rectangular parts, the width of which is the height of the ottoman, the length is 1/2 the circumference of the lower and upper parts;
We sew the rectangular parts together along the width from one edge until we get a long ribbon;
We baste one circle to it, sew along the seam, and do the same manipulation with the other circle. If you receive an uneven seam, you can trim it using a decorative border.

Making a case for a product using this method is simple and quick. They stuff him with everything soft material, which is at hand. At the end of the process, a zipper is sewn into the unstitched edges of the rectangular tape.

"Chair" made of plastic bottles

Plastic bottles can be used creatively in everyday life and can even be used to form practical furniture elements, because plastic containers are cheap, convenient, lightweight, and, in fact, eternal material. By making an ottoman from bottles with your own hands, you will acquire an irreplaceable item that will fit perfectly into the interior of your cottage or home, will not take up much space and will last for several years.

For a compact and soft seat, first prepare the bottles - wash them, remove the stickers. To make the container stronger, we place it in open form in a cold room for an hour, then close it with a stopper and place it under a well-heated radiator. Bottles expand due to temperature differences and keep their shape for a long time.

For upholstery, it is better to use furniture fabric such as faux fur or tapestry. The fabric should have a dense base and wash well.

You will need:

Stationery knife;
16 bottles of 1.5 l;
Threads, needles, sewing machine;
Two types of tape - transparent and double-sided;
Foam rubber (thickness – 3 cm);
Lightning;
Plywood (corrugated cardboard);
Furniture fabric for upholstery.

How to make an ottoman:

We make the seat from the middle: we wrap the central bottle with double-sided tape, to which we glue three or four more. Secure it well with transparent tape;
We make a circle, level the base along a straight and hard surface. Secure each layer from bottom to top with tape;
Let's cut out two round pieces of cardboard that are the same size as the pouf seat. Wrap the bottom and top with tape;
Take a piece of foam rubber and completely wrap the future piece of furniture. We sew round shaped foam rubber to its edges on top;
Now it’s time to take measurements, which we will transfer to the fabric. Next, cut out the parts of the product from the fabric and sew them in the round. We will sew a zipper into the side of the case and “dress” it with a pouf.

We get a light and reliable seat, also great for a children's room.

Another variation of a seat made from a large amount of foam rubber:

This material is taken in a rectangular piece, the container is placed on it and wrapped. It turns out to be a soft bag “with a plastic filling” inside and a voluminous seat. The container lies much smoother than when wrapped with tape;
This ottoman stands on bottle necks. For its stability and strength, we will take twice as many containers. We cut off the necks, stick a whole bottle into them, and in the end we get a cylinder, which we then decorate at our discretion.

Tire stool with backrest

You can use tires to make comfortable and durable ottomans for the hallway or any other room:

Let's prepare two round timbers from MDF or thick plywood, which should be slightly smaller in diameter than the wheel. They will serve to close holes;
We take bolts with nuts or self-tapping screws and fasten the circles in three places.

The ottoman design can be designed in two variations:

We will cover the top round piece of plywood with foam rubber, and attach this material to the side of the tire with a furniture stapler. Let's make a cover that we will stretch on top. If you have small squares of bars, you can paint them and make legs from them;
Country style method. Take a thick braided rope and wrap it around the ottoman, not forgetting to secure it with glue. First we will cover both round timbers in a spiral, then the side parts of the wheel. Hide the ends of the rope and cover the top with varnish.

You can improve the resulting product and make an ottoman with a back. It will require carefully processed wooden blocks(five pieces).

They are attached to the bottom of the chair, for which all the bars are connected to the side of the tire using four bolts.
The backrest can be made with a slight tilt back. To achieve this, the upper bolts are installed with a spacer of washers.
We make a back-sized pillow from two-layer foam rubber with a fabric cover. We sew ribbons on it (one third below the level of the top), they will also be tied to all the bars. Ribbons secure the cushion and at the same time serve to decorate the back of the pouf.

Pear ottoman option

Let's look at how to make an ottoman bag, which is a fashionable element of modern interiors.

You will need:

Pattern paper;
Fabric for the inner cover – 300x150 mm;
Threads of high density;
Strong and dense fabric for upholstery (suede, tapestry) – 320x150 mm;
Zipper – 60 cm;
Polystyrene foam filler with holofiber additive - 0.5-1 cubic meters. meter.

For the inner cover of the product, choose a slippery, smooth fabric. Thanks to it, the filler will easily roll over the bag and take the shape of the person resting in it.

The pouf pattern contains six bag wedges and one bottom piece for the base.

First the drawings the necessary details must be done on paper. Next, they are transferred to the fabric that will be used on the outer and inner parts of the ottoman;
When cutting, leave seam allowances of 1.5 cm;
The upholstery bag should consist of pieces that are slightly smaller in size. more details for filler, so the outer cover will be easier to put on the bag with filler;
We sew all the fabric parts of the bag. First, these will be wedges that are sewn together, then we proceed to the base;
Leave room for the zipper on the outside;
We pour filler into the inner bag, which will take up 2/3 of its volume, and stitch the remaining places;
We put the cover on top and fasten the zipper.

A cute pear ottoman will add comfort and coziness to your home.

Product with box

To make an ottoman with a drawer, you need to follow the following instructions:

From chipboard we cut out 2 blanks measuring 37x37 cm and 37x40 cm, and one square - 40x40 cm;
We cut out 4 pieces 37 cm long from the timber (4x4 cm in cross-section);
From these elements we make a box with a height of 37 cm;
Using wood glue, we fasten the timber in the inner corners;
We fix the corners from the outside with metal corners or self-tapping screws;
Apply glue to the bottom and timber. Glue the bottom and let it dry. After this we secure it with self-tapping screws;
We attach 4 locking bars to the square sheet for making the lid. This will secure the lid in the box;
We upholster it with soft material (batting, foam rubber, padding polyester).

This piece of furniture can be perfectly used as an ottoman for shoes, which can be put away in a storage box from season to season.

Video: Detailed instructions on how to make an ottoman with your own hands

In the east, in ancient times, people's homes were decorated with various poufs. It was not only convenient, but also beautiful furniture. After some time, such furniture appeared in European homes. People all over the planet liked them so much that now they can be seen in almost any home.

Take any modern magazine home design, and you will see in them images of a wide variety of poufs. Be on the wave of fashion without ruining yourself. A beautiful piece of furniture can be created from scrap materials. Following simple instructions How to make an ottoman with your own hands, you can make a wonderful decoration for your interior.

A simple ottoman made from sheets and burlap

You can use any fabric for this, either tape burlap or decorative fabric, which is simple and easy to use. If you want to do something different, choose a fabric that meets the same criteria.

What you need:

pattern;
scissors;
ribbon;
sackcloth;
1 old sheet;
pins;
threads;
old things (eg old clothes, frayed towels, fabric scraps);
sewing machine;
fiberfill;
ribbon;
thick needle.

Work process:

We work with the pattern. Print out all the pattern pieces and cut them out.

Place the burlap (any thick fabric will work) and the sheets together, with the burlap on top. Attach the pattern and cut the fabric, repeat until you have eight pieces (You will have eight pieces of burlap and eight pieces of bedding).

On the bottom layer, place two pieces of burlap in the middle and one piece of sheet on top. Press the layers together so they are completely even.

Sew your layered set together with a straight stitch.

Open each pair in the middle and press the seams.

Sew two pieces of fabric together, placing one piece on top of the other. Repeat this with the other two layers. At this point you will have two halves of the pouf. Turn one half right side, and the other inside out.

Attach the halves and sew them, but not all the way, leave a few centimeters for an opening through which you can fill your product. Turn out the resulting product.

At this stage, you need to fill your pouf with old things. At the bottom of the product you need to put things from heavy fabrics, then start putting lighter things there, such as rags and scraps of fabric. Continue filling - heavier fabrics are placed in the center, and lighter fabrics are placed on the sides. The bottom of the pouf and the center should be stuffed with heavy fabrics to strengthen the entire structure. Try to avoid any gaps.

When the pouf is two-thirds full, place fiberfill on the sides to smooth out the shape and fill out the bumps. The upper part of the pouf should be soft so that it is comfortable to sit on, and the product should hold its shape well.

Once you have filled the pillow with filling, sew the opening by hand. Don't worry about the quality as the top will be covered with another piece of fabric.

Cut an octagonal piece to cover the hole and sew it up and down with a special stitch. You can also add decorative stitching to your sewing.

As you can see, making an ottoman with your own hands is not too difficult, with a little patience and work - a wonderful interior decoration is ready. This way you will get a soft ottoman that will be a great tool for relaxation at home.

DIY wooden ottoman

Using carpentry skills you can make truly magnificent things that will be useful in everyday life. By making an ottoman with a drawer, you will not only have a wonderful interior decoration, but additional space where you can put things.

To make a frame base, take everything necessary materials and tools. First of all, you will need 4 sheets of chipboard or laminated board, preferably their size is 40 by 30 centimeters.

Let's consider the stages of work:

The boards are fastened together; self-tapping screws will help to do this. Don't forget about the metal corners, with which you will form an even structure. It is advisable to coat all parts with wood glue.

If you want your ottoman to move, you can attach wheels to the bottom of the product. To do this, you first need to attach 4 bars measuring 4.8 centimeters. Take special furniture wheels that come with everything you need to mount them. We attach the bars from below using wood glue, and attach the wheels to them. We lay the base on top.

Once you have formed the frame, you can start upholstering your creation. Take 4 pieces of foam and attach it to the top of the pouf and to the sides. Since your product is on wheels, there is no need to upholster the bottom part.

Then comes the most important part, you need to make an attractive outer case. We will look at how to do it below. For the cover, you will need a special upholstery fabric that will not wear out as much. Sew the cover, preferably with a zipper, so that you can change it if necessary.

Ottoman made from plastic bottles

Not everyone has carpentry skills and can make an ottoman from boards, but this does not mean that you need to abandon this idea. You can even make a wonderful ottoman from plastic bottles. And what will be the benefit for nature from this!

As with a wooden ottoman, you will first need to make a frame. It is made from plastic bottles. Two circles are cut out of cardboard, the diameter of which will depend on your personal preferences. It is advisable to take thick cardboard, so you can take the box where the office equipment was located.

Then they take plastic bottles and fastened together with tape, this must be done carefully so that the bottles are fastened evenly. Put all the design elements together.

Make upholstery from thick foam rubber. First, cut out the bottom and top piece and attach it to your structure. Then cut a rectangle that fits your project. To avoid mistakes, make it a few centimeters larger, as this will need to be sewn together later. All elements can be connected to each other using tight stitches.

Now you can sew a cover for your product. To do this, you will need to choose a suitable fabric, the color and density you need. In this case, you don't need to bother with the pattern. Simply cut out two circles from the fabric to attach to the top and bottom, and 2 rectangles to fit. Then the rectangles will need to be sewn together.

After this, sew the top piece with the rectangles using basting thread. And you can proceed to the lower part, which is stitched in the same way as the upper one. A decorative border will help brighten up all the imperfections if your seam doesn’t turn out so beautiful. Just attach it, your product will look more attractive. You can attach a zipper to the unstitched edges of rectangles sewn together.

If you are making a cylindrical ottoman, then the cover for it is sewn a little differently. You must make all the parts in the shape of a cylinder. You should make the side parts not from two pieces of fabric, but from four. The fabric must be dense so that the shape holds well.

What can you make from an old sweater?

You can create truly magnificent interior decorations from old things. Take an old sweater from interesting design and make a bean bag out of it with your own hands. Let's look at how to make an ottoman bag with your own hands.

First, make a piece of felt that will serve as the bottom of your product.
Now we will give the old sweater the desired shape, for this you will need to bend the sleeves inside the product and sew the remaining holes. Try to keep your seam even.
The bottom of the sweater and the felt are sewn together, and you get a bag that just needs to be stuffed with some material. But before you do this, you will need to strengthen the structure.
In order for the ottoman to keep its shape perfectly, it is better to make an inner cover for it from lining fabric. Make 4 parts according to the dimensions of your product and sew them together. Make sure to leave a hole at the top so you can stuff it.
You need to make a lace at the top so that you can tighten your structure after stuffing. Place the case inside. Use expanded polystyrene, foam rubber and padding polyester to stuff your bag. Tie the entire structure tightly with a cord - and enjoy your new piece of furniture.

As you can see, making an ottoman is a creative process, so you can change something or create your own designs using scrap materials. Think about how to make your own creation or use the instructions.

When the old interior has become boring and you want changes, it is not necessary to start a renovation. Various additional items can change and enliven the interior. You shouldn’t immediately go shopping in search of something new and unusual. Don’t forget that you can create many masterpieces with your own hands at home. One of the practical and interesting things in the room is the ottoman. It comes in absolutely any shape, size, color.

You can fit it into any of the rooms and in different styles. If you are wondering how to make an ottoman with your own hands, you will need a few useful ideas on this matter. But the main advantage of such an item is the wide selection of materials for creation.

Ottoman made of multi-colored fabric

Sewing a bright ottoman from fabric is not a difficult task.

Before starting work you should prepare:

fabric of different colors;
lining fabric;
filler;
sewing machine;
needle and thread;
2 large buttons.

You can use padding polyester or thick foam rubber as a filler. Then the pouf will be moderately soft and will hold its shape.

The first stage of work is the pattern. Draw a circle on paper the size you want the pouf to be. Divide this circle into 12 equal parts. Do you have fewer flowers? You can alternate them or divide them into 6-10 parts. The finished patterns are applied to the fabric and triangular pieces are cut out. Cut them out with a margin that will be used for stitching. The fabric for the lining is cut in the same way.

The next stage is stitching. Grab the petals of the circle together on the sides with threads, and then stitch them onto sewing machine. You should end up with two round multi-colored bases - top and bottom. They need to be sewn qualitatively from the inside out. Leave one part uncovered to fill the pouf.

The final stage is filling. Place the required amount of filler inside the case. The pouf will immediately become voluminous. There should be a lot of padding polyester or foam rubber so that the pouf does not significantly change its shape when pressed. Carefully sew the last part. And close the place where the petals are sewn in the center of the circles with large buttons. Do-it-yourself multi-colored pouf is ready.

Plastic bottles as a base for a pouf

Plastic bottles have many uses in everyday life. When a considerable number of them have accumulated, you can make an ottoman with your own hands.

You will need:

about 40 bottles including caps;
soft foam lining;
cardboard;
wide tape;
fabric for the cover;
needle, thread.

Take bottles with tightly screwed caps and use tape to connect them to each other so that they form a filled circle. You need to cut out 2 circles from cardboard. Their diameter should match the diameter of the bottom of the glued bottles. Tape the cardboard tightly to plastic containers. The frame for the ottoman is ready.

Then you should prepare the foam for the lining. 3 blanks are cut out: 2 circles of the same size with cardboard blanks and 1 rectangle. It will wrap vertically around the ottoman. You can secure the workpieces using threads or a construction stapler. All that remains is to sew a cover for the pouf from the desired fabric. This will not be difficult if you have minimal sewing skills. You can make a cute ottoman with your own hands quickly and cheaply.

Non-standard use of a plastic bucket

An old unnecessary plastic bucket can easily turn into a useful and beautiful thing - an ottoman.

For the ottoman you will need:

jute rope or rope;
building glue gun;
cardboard;
textile;
stapler;
large button;
microfiber fabric.

A bucket without a handle should be turned over and wrapped tightly around with a rope. When winding, each stitch must be placed on glue so that the rope subsequently fits tightly.

When the task is completed, you can begin to build a soft seat for the pouf with your own hands. Take some cardboard, place it on the ottoman and cut out a circle the same size as the bottom. It is also necessary to cut a circle from the fabric, but with a larger diameter of 10 cm. Connect the fabric to the cardboard in the middle with a button. Roll the microfiber into a tube and begin wrapping it between the cardboard and the fabric around the button. Use a glue gun to secure. Roll the fabric until you reach the edges of the cardboard. Staple the top fabric to the back of the cardboard. The ottoman is ready, all that remains is to connect the lid and base using glue or Velcro tape.

Functional ottoman with a box inside

The task gets a little more complicated if you want to DIY and use the ottoman as storage space. Having a ready-made box will make the task much easier. But it’s also possible to do it yourself.

Prepare for him:

4 identical sized chipboard rectangles. They will be the edges of the pouf;
2 squares of chipboard for the base and lid;
wooden blocks for fastening and small legs;
screwdriver and screws.

If you do not have the skills of a carpenter, then it is better to ask a more experienced and experienced person for help when assembling the box. strong man. Assemble the structure from the parts, use screws and glue to secure it.

The seat is not attached to the ottoman; it should be freely removed and put on. So that the seat does not move during operation, inside stops are attached to it. It is necessary to attach the stops at such a distance that when removing and putting on the cover, they do not rub against the edges of the chipboard and do not touch the bars inside.

The frame of the box must be covered with fabric; it can be secured using a stapler. The inside of the box is also lined. Thick foam rubber should be placed under the fabric cover for comfortable sitting. This is how you get a practical ottoman with legs that will fit into any interior style. You just have to choose the right fabric.

Video gallery

How to make an ottoman with your own hands without throwing money away? Of course, you can buy it in a furniture store, but looking at the cost of a simple chipboard product, you will want to do crafts at home. If we consider furniture sets as a whole, then most of them belong to rather complex structures.

You can do something from this list with your own hands experienced craftsmen, and only the ottoman is made without special skills and knowledge from improvised means. A practical item will be obtained when you choose a durable and high-quality upholstery fabric that can be wiped, cleaned, and washed.

Such materials include leather or furniture fabric sold in specialized stores. All that remains is to view step by step instructions for the manufacture of ottomans of various shapes.

So:

An ottoman for seating several people is comparable in height to an armchair and more like a soft bench. For the home, such a model is inconvenient and unnecessary, but in fitting and waiting areas it is very relevant.
An ottoman in addition to something with a certain height. From the definition itself it becomes clear that it is not an independent product, but serves as an application. Models that barely rise above the floor are not intended for sitting on, but are used as footrests for adults. Children love these miniature things and enjoy using them in their games.
Complementing armchairs, sofas, beds, sliding under the table or as a component in a non-standard combination (beach cabin with pouf), ottomans firmly occupy a niche in furniture showrooms. One can say more, there is a fashion for designer items that make the interior fashionable, complementing it.
The video in this article introduces poufs with advanced features. Looking through it, you remember the plot of the film, when “with a slight movement of the hand, trousers turn into shorts,” and here the ottoman transforms into a full-fledged chair with a table, a bed with a lamp stand and other necessary items, while taking up a minimum of space.

Before you start making an ottoman with your own hands, you need to have an idea about this seemingly simple furniture family.

So, poufs are classified according to materials, design, functions and shapes:

On soft goods textiles, leather are used. It’s nice to throw your legs on a hand-knitted ottoman, and when the size allows, you can lounge on it.
Rigid ottoman designs are made from rattan, wood, often varnished, and cork tree bark.. Hard ottomans, made with your own hands, are not suitable for long-term sitting, but they bring liveliness and intrigue to the interior.

Attention: An ottoman is definitely a necessary thing, and its need is felt when entering the house, or rather, the hallway.

How to make, sew, knit and what design of an ottoman to choose is not an easy task. Ottomans can have exposed frames made of steel tubing or wood.
The ottoman may have a closed frame, and the legs are hidden under the frills of a decorative skirt. Such products are popular among the British and Americans.
Ottoman with barely visible legs when a chair is copied without armrests and backrest.
DIY ottoman with back- not only a comfortable chair for members of the whole family, regardless of body weight, but also excellent support for a sore back.
What could be simpler than an inflatable ottoman?, consisting of a textile cover with a zipper and an inflatable chamber inside it? Ottomans differ not only in materials and designs, but also in shape.
DIY square ottoman, round, triangular, combined from different geometric shapes, can be made from available materials.

Tools at home

How to make an ottoman yourself if you don’t have the skills or desire to saw, cut, or twist? Craftsmen offer a lot of ideas and proposals that are brought to life. The work of making a cute ottoman is not difficult, but quite exciting, and a thing made with your own hands radiates a special warmth and has an aura of home comfort.

Soft ottomans

The most simple circuit How to make a soft ottoman with your own hands is as follows:

Two circles are cut out of fabric with a diameter equal to the diameter of the upper and lower parts of the product.

Tip: When cutting out parts, remember to leave seam allowances.

Two rectangular parts of the same size are cut out:

width of the height of the pouf;
length equal to half the circumference of the top and bottom of the pouf.

Rectangular parts are sewn together on one side along the width to obtain a long ribbon.
One of the circles is basted to it and sewed along the seam.
The same is done with the second circle.

Tip: If the seam is not too even or neat, it is trimmed with a decorative border.

The resulting pouf cover is stuffed with any suitable material.
A zipper is sewn into the unstitched edges remaining in the rectangular tape.

The photo shows a diagram of how to make a pouf in the simplest way.

In a similar way, you can make an ottoman in the shape of a cube. The difference is in making the pieces, which must be square in shape, and to make the sides you will need to make four pieces of fabric rather than two.

Then:

The details fit together.
To more clearly indicate the edges of the cube, you can use a canvas of a different contrasting color.
A denser fabric will provide additional strength and elasticity.
Such a pouf can be filled with padding polyester and foam rubber. These materials hold their shape perfectly and do not deform.
The hole for stuffing the material is made at the bottom of the pouf so that it is not visible.
If desired, it can be stitched tightly after stuffing the pouf, or a zipper can be sewn in so that the material can be replaced if necessary.

Sewing an ottoman

The video in this article demonstrates the procedure for sewing an 8-piece ottoman. To do this, a sheet of paper is folded in four, a template is drawn on it and cut out according to the diagram below.

The unfolded template is fixed on the fabric and the cutting of 8 pieces begins.

Attention: It is not necessary to purchase new fabric for the pattern; you can use old deposits of knitted clothes and old sweaters.

The photo below shows that the sharp end of each hexagon is bent inward by approximately 5-6 cm and stitched on a machine, which makes it possible to obtain an octagonal hole for stuffing the finished product after assembling all the elements.

The blanks are attached to each other in pairs with a distance from the edge of approximately 1 cm. The pairs are folded with the front side so that the seams are on the wrong side; when sewn, there are 4 segments of 2 blanks.
In the same way, they are sewn together in 2 sections and you get 2 halves of the future ottoman.
The halves are connected to each other by machine, the cover is turned right side out.
The ottoman is stuffed with prepared filling (holofiber, foam rubber, padding polyester), and the hole is closed with a lid of the appropriate size. The edges of the lid should already be finished, and it is manually, carefully sewn on top of the stuffing hole.
The instructions for beginners recommend sewing an ottoman with literally three seams. Why cut out 2 circles, the diameter of which is about 50 cm, or 2 squares, if you prefer clear lines. Geometric shapes will serve as the top or bottom of the future product.
A strip of the same material or another is cut out in a size corresponding to the length of the circle or the perimeter of the square; the width of the strip depends on the height of the ottoman. The height of the ottoman, in turn, is selected depending on the function that the product will perform, whether it is a footrest, a seat in the hallway, a toy for young children, or a structure in the living room.

Attention: The cutting of the strip for the side of the ottoman is done taking into account seam allowances.

The work is done in such a way that the seams are on the wrong side, the strip is sewn first of all to the bottom of the product and only then to the top.
After stitching all the seams, the ottoman is turned right side out and stuffed.
Using the same patterns presented above, covers for the ottoman with a zipper are cut out for the first option and for the second. This will allow you to wash or clean the cover in the future without unnecessary problems and time-consuming, and without having to solve the problem of how to cover the ottoman with fabric if it is already made of fabric.

Reliable base for plastic bottles

Plastic bottles are available in unlimited quantities in every home. Take, for example, beer and water bottles with a capacity of 1.5 - 2 liters; their color in the finished product does not matter, and they will help unload debris in the yard and house.

To make a good, stable ottoman you will need at least 16 1.5 liter bottles or 9 2 liter bottles.
Cardboard packaging containers from household appliances also wait their turn and are not thrown away for years, but what if the refrigerator breaks down, how to take it for repairs? The video in this article will show how cardboard is used to make an ottoman from plastic bottles.

You need to stock up on tape, foam rubber and upholstery material.

Hot glue gun, zipper for case.

Attention: From round bottles you can make an even larger circle, square or rectangle, that is, the shape of the product is chosen according to your preferences.

For ease of use, if a very large ottoman is planned, the bottles are connected into separate sectors and sections with tape, and then the formation of the overall structure begins.

If the future product is planned to be round in shape, then the ottoman should be made starting from the middle.
To do this, take a bottle and, using radial movements, attach new elements to it, which are carefully fixed to each other with tape.
After completing the circle, cut out the base from thick cardboard. It should be slightly larger in size than the bottle structure.

The cardboard is also secured with several layers of adhesive tape. There is no need to dwell once again on the point that 2 bases must be prepared, and everything is clear.
Now it’s the turn of the soft upholstery, for which two parts for the top and bottom are cut out of dense foam rubber, which are glued in place.
From the remaining part of the foam rubber, according to the dimensions of the circumference line of the side part, a rectangle is cut out, which is wrapped around the pouf.
The final stage of sewing the cover from furniture fabric, preferably with a zipper. This operation will not only allow you to easily remove the cover for washing, but also make several options and update it from time to time. appearance of your product.

Ottoman from grandma's rarity

How to make an ottoman out of a stool so that grandma’s rarity can serve for many more years?

Indeed, a well-knit stool made of durable wood, painted oil paint, may please the owners for many years, but the appearance does not correspond to the modern environment. Remaking an old stool into a stylish ottoman will help bring balance to the interior.

The stool structure is pre-strengthened with self-tapping screws.
The legs are shortened a little - do not forget to check the level so that the ottoman does not wobble later.
The frame of the future ottoman is assembled using 4 sheets of plywood. They are attached with self-tapping screws to the legs of the stool.
The fifth sheet of plywood is screwed from below and serves as the bottom of the future craft.
The foam for the seat is cut out with an allowance of 5 cm.

Attention: The upper part of the ottoman is coated with glue, then the foam rubber will not bunch up into an untidy lump over time.

The upholstery fabric on the seat is attached together with the foam rubber using staplers.
Foam rubber can be attached to the sides with slats, which help give the ottoman a round shape and make it more beautiful.
The rest of the structure is covered with fabric and secured with staples.
The wheels are screwed on or, as in the photo above, the cute little legs of the updated stool peek out from under the flirty upholstery.
The problem of how to make an ottoman from a stool was solved in a short time.

For those who like to knock

The rich Russian language raises many associations and questions. How to knock, where to knock, when to knock? For those who like to hit a nail with a hammer, we suggest making an ottoman with your own hands from boards and chipboard.

Rectangular pieces of 40x30 cm from chipboard are pre-prepared in the amount of 4 pieces.
A circle with a diameter of 30 cm and 4 wooden blocks.
Wood glue.
Furniture wheels with special fasteners.
Metal corners, screws.
Foam rubber and upholstery fabric.

How can you see the set? necessary materials not much different from each other when we make an ottoman with our own hands, even in different ways:

A box is assembled from rectangles. Metal corners and self-tapping screws are used, all corners of the structure are aligned, they must be straight.
The bars on which the wheels will later be located are fixed with glue on the lower part.
A base is attached to the top in an individually selected shape.
The finished frame is upholstered using the same technology using foam rubber, fabric and a zipper on the cover.

For lovers of knitting and stuffing

How to make an ottoman with your own hands that is frameless and therefore soft. Needlewomen who know how to crochet will be able to knit a soft ottoman much faster, but not everyone may like their appearance.

Lovers of working with knitting needles present interesting models of ottomans knitted with them:

To work, you will need the thickest knitting needles that are available in stores.
For knitting needles with a diameter of 9 mm, fairly thick wool is suitable.
Ordinary threads offered in stores are too thin. The price for them is not high, but due to the fact that you will have to make thicker ones out of them, weaving them together, you will have to purchase enough a large number of, which will add to the cost of the product.
You can, of course, cut, unravel, twist unnecessary knitwear, which takes a lot of time, and even find it at home required quantity plain knitted clothing that has become unusable is quite problematic.
It seems that the solution to the problem of how to make an ottoman with your own hands has reached a dead end, but cotton clotheslines caught my eye.

Attention: Synthetic clotheslines are not suitable for this job, and cotton ropes are difficult to buy in small towns.

For a soft ottoman of sufficient size, you will need 20-30 of these ropes, which are tied into a long rectangle.
The side is tied together with rope to create a spacious, wide skirt.
The bottom is tied with a rope of the same color and you get a bag that needs to be stuffed with something. There are 2 options here - use old items neatly stacked on shelves in the closet or go to the store and buy foam rubber or holofiber.

Unnecessary old items make the ottoman heavy and not as round and fluffy as those made from store-bought materials, but it frees up space in the closet for new clothes.
The top of the ottoman is decorated with the same rope and you can try out your product.

Ottoman from an old bucket

Here's another one interesting solution, for which we will need: an old plastic bucket, a thick jute rope, a hot glue gun, a stapler, scissors, a cabinet handle, Velcro tape, upholstery fabric and a few new microfiber cloths. You will also need cardboard, but it will be better if you replace it with thin plywood.

First, wash the bucket and remove the metal handle.

Next, using hot glue, glue the outer surface of the bucket with rope, starting from the bottom.

Cut the end of the rope and hide it carefully.

Place the bottom of the bucket on the cardboard and trace it. Lay out the upholstery fabric according to the intended template and cut the round blank with a 5-centimeter outlet.

We make a hole in the center of the cardboard and fabric. We pass a bolt from a furniture handle through them and screw on the knob.

Next, we roll the fiber into tubes and radially wrap the bolt between the cardboard and paper, creating a kind of roll. To prevent the fiber from unwinding, we securely fix it with glue.

Then the fabric is stretched and secured on the reverse side with a stapler.

To hide the cardboard marks, cover the back of the seat with another piece of fabric, which needs to be placed on glue.

Cut the Velcro into four equal pieces and stick them crosswise onto the bottom of the bucket and the base of the saddle - with the bristles towards the bucket and the fluffy part towards the seat. Connect the two parts. Hooray! The ottoman is ready!

The result is something like this useful craft, on which you can sit comfortably.

Various options provide the opportunity to solve the problem of how to make an ottoman yourself from scrap materials that are available in abundance in any home. The only thing I still wanted to focus on was the floor in the room.

Laminate is quite sensitive to mechanical stress, so it is better to make an ottoman without wheels and legs, that is, with a solid bottom. On soft covering, carpet, ottomans on casters are appropriate, but for tiled flooring there are no restrictions, unless forged legs can be an exception.

Chipboard ottoman

In one toast, the hero of “Prisoner of the Caucasus” expressed the very essence of existence, so that “our desires coincide with our capabilities.” If you have free time and a desire to make an ottoman with your own hands from chipboard, you need to prepare the possibilities.

Tools and necessary materials are stocked in advance.

A good ottoman cannot be made without a good base made from a sheet of chipboard. Optimal size the design is within the range of 400x400x500 mm.
You can make a wooden ottoman using a simplified technology, making a frame in the form of a mailbox from a timber and screwing it on with the side cuts, but since the ottoman is being made for yourself, you can try.

Work with pleasure

You should not start work in a bad mood: something will fall on your foot or you will hit the wrong nail with a hammer.

5 squares of 400x400 mm are marked and cut from a sheet of chipboard to make the walls of the structure and the bottom.

Attention: The bottom of the ottoman should not be made of plywood; small children like to hide in secluded corners and can break thin plywood and get injured.

The lid can be made in any geometric shape: square, round, oval. Beginners can skip experimenting and stick with a square lid. It will have dimensions slightly larger than the main box 430x430 mm, in order to protect it from falling inside.
The height of the finished product is made up of its constituent elements - the height of the structure is 400 mm, plus the rollers are 50 mm, the bottom and tire are 32 mm thick, the upholstery is 50 mm thick, for a total of 532 mm.
From the prepared elements, the formation of the structure begins.
The sides of the ottoman are fastened with metal corners. The beams that glue all the internal corners will help increase rigidity and reliability.
From the front side of the ottoman, the cutouts themselves are screwed into the beams, the heads of which should be recessed into the wood so that later there are no problems with torn upholstery.
The lower part of the box is coated with wood glue along the perimeter, capturing the ends of the beams.
The bottom of the ottoman is attached, and the cuts themselves are again screwed into the ends of the beams. The assembled structure must dry well.
The base of the ottoman has been made, but there are still no wheels and a lid on which you can sit in the future.
The lid is secured with 4 bars screwed from the inside. The work is carried out after you are sure that the lid closes smoothly and the side reinforcement bars do not interfere with the closing of the lid.
The finished structure is turned over, and the wheels are attached using the cuts themselves.

Attention: They are fixed through the bottom to the ends of the beams, for which small holes are drilled in the bottom.

Before continuing work, you need to make sure that the resulting structure is sufficiently stable, holds the person sitting on it well and there are no shortcomings that would interfere with further work, otherwise there is no point in starting the upholstery.

The ottoman gets dressed

A do-it-yourself ottoman made of wood, chipboard, or generally soft needs clothing on top. This function is performed with honor by high-quality upholstery fabric, neatly attached to the frame of the structure.

First, the cover of the ottoman is made, for which a soft lining is cut out from foam rubber, padding polyester, and batting. The size of the pad should correspond to the parameters of the seat so that it is neatly glued into place without drooping.
From the fabric intended for upholstery, a blank is cut out to be somewhat larger in size than the lid. This is done so that the edges can be folded under the lid and secured from the inside with a stapler or furniture nails.
The instructions instruct you to further design the sides of the ottoman.
A part is cut out from upholstery fabric 400 mm x 4 = 1600 mm with a margin for connection. Also in height, the material must have an allowance at the top and bottom.

Attention: The fabric must be straightened, stretched, tucked inward, and the edges must be secured with furniture nails or a stapler.

The seat is decorated, the niche is upholstered, all edges are carefully closed and the finished product can be presented to discerning family members for inspection.
A do-it-yourself plywood ottoman is made according to the same pattern if you choose this simple design option.
The work becomes a little more complicated when an opening drawer is provided on the ottoman, then the stop bars are replaced with door hinges.

Getting acquainted with the design of this simple piece of furniture, one detail catches your eye: despite the difference in shapes of ottomans and their types, the base is a rigid frame, there is a seat and legs. They are decorated in different ways, but quilted leather or leatherette gives the products an elite, luxurious look and you cannot immediately determine that the price of the product is within reasonable limits.

Although, it should be noted that a neat ottoman, covered with a different material, can bring comfort and convenience to the room and looks no less elegant than a leather one.

Experienced craftsmen can make something from this list with their own hands, and only the ottoman is made without special skills and knowledge from improvised means. A practical item will be obtained when you choose a durable and high-quality upholstery fabric that can be wiped, cleaned, and washed.

Such materials include leather or furniture fabric sold in specialized stores. All that remains is to look at the step-by-step instructions for making ottomans of various shapes.

So:

An ottoman for seating several people is comparable in height to an armchair and more like a soft bench. For the home, such a model is inconvenient and unnecessary, but in fitting and waiting areas it is very relevant.
An ottoman in addition to something with a certain height. From the definition itself it becomes clear that it is not an independent product, but serves as an application. Models that barely rise above the floor are not intended for sitting on, but are used as footrests for adults. Children love these miniature things and enjoy using them in their games.
Complementing armchairs, sofas, beds, sliding under the table or as a component in a non-standard combination (beach cabin with pouf), ottomans firmly occupy a niche in furniture showrooms. One can say more, there is a fashion for designer items that make the interior fashionable, complementing it.
The video in this article introduces poufs with advanced features. Looking through it, you remember the plot of the film, when “with a slight movement of the hand, trousers turn into shorts,” and here the ottoman transforms into a full-fledged chair with a table, a bed with a lamp stand and other necessary items, while taking up a minimum of space.

Before you start making an ottoman with your own hands, you need to have an idea about this seemingly simple furniture family.

So, poufs are classified according to materials, design, functions and shapes:

Soft products use textiles, leather. It’s nice to throw your legs on a hand-knitted ottoman, and when the size allows, you can lounge on it.
Rigid ottoman designs are made from rattan, wood, often varnished, and cork tree bark.. Hard ottomans, made with your own hands, are not suitable for long-term sitting, but they bring liveliness and intrigue to the interior.

Attention: An ottoman is definitely a necessary thing, and its need is felt when entering the house, or rather, the hallway.

How to make, sew, knit and what design of an ottoman to choose is not an easy task. Ottomans can have exposed frames made of steel tubing or wood.
The ottoman may have a closed frame, and the legs are hidden under the frills of a decorative skirt. Such products are popular among the British and Americans.
Ottoman with barely visible legs when a chair is copied without armrests and backrest.
DIY ottoman with back- not only a comfortable chair for members of the whole family, regardless of body weight, but also excellent support for a sore back.
What could be simpler than an inflatable ottoman?, consisting of a textile cover with a zipper and an inflatable chamber inside it? Ottomans differ not only in materials and designs, but also in shape.
DIY square ottoman, round, triangular, combined from different geometric shapes, can be made from available materials.

Tools at home

Soft ottomans

The simplest diagram of how to make a soft ottoman with your own hands is as follows:

Two circles are cut out of fabric with a diameter equal to the diameter of the upper and lower parts of the product.

Tip: When cutting out parts, remember to leave seam allowances.

Two rectangular parts of the same size are cut out:

width of the height of the pouf;
length equal to half the circumference of the top and bottom of the pouf.

Rectangular parts are sewn together on one side along the width to obtain a long ribbon.
One of the circles is basted to it and sewed along the seam.
The same is done with the second circle.

Tip: If the seam is not too even or neat, it is trimmed with a decorative border.

The resulting pouf cover is stuffed with any suitable material.
A zipper is sewn into the unstitched edges remaining in the rectangular tape.

The photo shows a diagram of how to make a pouf in the simplest way.

Then:

The details fit together.
To more clearly indicate the edges of the cube, you can use a canvas of a different contrasting color.
A denser fabric will provide additional strength and elasticity.
Such a pouf can be filled with padding polyester and foam rubber. These materials hold their shape perfectly and do not deform.
The hole for stuffing the material is made at the bottom of the pouf so that it is not visible.
If desired, it can be stitched tightly after stuffing the pouf, or a zipper can be sewn in so that the material can be replaced if necessary.

Sewing an ottoman

The video in this article demonstrates the procedure for sewing an 8-piece ottoman. To do this, a sheet of paper is folded in four, a template is drawn on it and cut out according to the diagram below.

The unfolded template is fixed on the fabric and the cutting of 8 pieces begins.

Attention: It is not necessary to purchase new fabric for the pattern; you can use old deposits of knitted clothes and old sweaters.

The photo below shows that the sharp end of each hexagon is bent inward by approximately 5-6 cm and stitched on a machine, which makes it possible to obtain an octagonal hole for stuffing the finished product after assembling all the elements.

The blanks are attached to each other in pairs with a distance from the edge of approximately 1 cm. The pairs are folded with the front side so that the seams are on the wrong side; when sewn, there are 4 segments of 2 blanks.
In the same way, they are sewn together in 2 sections and you get 2 halves of the future ottoman.
The halves are connected to each other by machine, the cover is turned right side out.
The ottoman is stuffed with prepared filling (holofiber, foam rubber, padding polyester), and the hole is closed with a lid of the appropriate size. The edges of the lid should already be finished, and it is manually, carefully sewn on top of the stuffing hole.
The instructions for beginners recommend sewing an ottoman with literally three seams. Why cut out 2 circles, the diameter of which is about 50 cm, or 2 squares, if you prefer clear lines. Geometric shapes will serve as the top or bottom of the future product.
A strip of the same material or another is cut out in a size corresponding to the length of the circle or the perimeter of the square; the width of the strip depends on the height of the ottoman. The height of the ottoman, in turn, is selected depending on the function that the product will perform, whether it is a footrest, a seat in the hallway, a toy for young children, or a structure in the living room.

Attention: The cutting of the strip for the side of the ottoman is done taking into account seam allowances.

The work is done in such a way that the seams are on the wrong side, the strip is sewn first of all to the bottom of the product and only then to the top.
After stitching all the seams, the ottoman is turned right side out and stuffed.
Using the same patterns presented above, covers for the ottoman with a zipper are cut out for the first option and for the second. This will allow you to wash or clean the cover in the future without unnecessary problems and time-consuming, and without having to solve the problem of how to cover the ottoman with fabric if it is already made of fabric.

Reliable base for plastic bottles

Plastic bottles are available in unlimited quantities in every home. Take, for example, beer and water bottles with a capacity of 1.5 - 2 liters; their color in the finished product does not matter, and they will help unload debris in the yard and house.

To make a good, stable ottoman you will need at least 16 1.5 liter bottles or 9 2 liter bottles.
Cardboard packaging containers from household appliances also wait their turn and are not thrown away for years, but what if the refrigerator breaks down, how to take it for repairs? The video in this article will show how cardboard is used to make an ottoman from plastic bottles.

You need to stock up on tape, foam rubber and upholstery material.

Hot glue gun, zipper for case.

Attention: From round bottles you can make an even larger circle, square or rectangle, that is, the shape of the product is chosen according to your preferences.

For ease of use, if a very large ottoman is planned, the bottles are connected into separate sectors and sections with tape, and then the formation of the overall structure begins.

If the future product is planned to be round in shape, then the ottoman should be made starting from the middle.
To do this, take a bottle and, using radial movements, attach new elements to it, which are carefully fixed to each other with tape.
After completing the circle, cut out the base from thick cardboard. It should be slightly larger in size than the bottle structure.

The cardboard is also secured with several layers of adhesive tape. There is no need to dwell once again on the point that 2 bases must be prepared, and everything is clear.
Now it’s the turn of the soft upholstery, for which two parts for the top and bottom are cut out of dense foam rubber, which are glued in place.
From the remaining part of the foam rubber, according to the dimensions of the circumference line of the side part, a rectangle is cut out, which is wrapped around the pouf.
All that remains is the final stage of sewing a cover made of furniture fabric, preferably with a zipper. This operation will allow you not only to easily remove the cover for washing, but also to make several options and update the appearance of your product from time to time.

Ottoman from grandma's rarity

How to make an ottoman out of a stool so that grandma’s rarity can serve for many more years?

Indeed, a well-built stool made of durable wood, painted with oil paint, can delight its owners for many years, but the appearance does not correspond to the modern environment. Remaking an old stool into a stylish ottoman will help bring balance to the interior.

The stool structure is pre-strengthened with self-tapping screws.
The legs are shortened a little - do not forget to check the level so that the ottoman does not wobble later.
The frame of the future ottoman is assembled using 4 sheets of plywood. They are attached with self-tapping screws to the legs of the stool.
The fifth sheet of plywood is screwed from below and serves as the bottom of the future craft.
The foam for the seat is cut out with an allowance of 5 cm.

Attention: The upper part of the ottoman is coated with glue, then the foam rubber will not bunch up into an untidy lump over time.

The upholstery fabric on the seat is attached together with the foam rubber using staplers.
Foam rubber can be attached to the sides with slats, which help give the ottoman a round shape and make it more beautiful.
The rest of the structure is covered with fabric and secured with staples.
The wheels are screwed on or, as in the photo above, the cute little legs of the updated stool peek out from under the flirty upholstery.
The problem of how to make an ottoman from a stool was solved in a short time.

For those who like to knock

Rectangular pieces of 40x30 cm from chipboard are pre-prepared in the amount of 4 pieces.
A circle with a diameter of 30 cm and 4 wooden blocks.
Wood glue.
Furniture wheels with special fasteners.
Metal corners, screws.
Foam rubber and upholstery fabric.

As you can see, the set of necessary materials does not differ much from each other when we make an ottoman with our own hands, even in different ways:

A box is assembled from rectangles. Metal corners and self-tapping screws are used, all corners of the structure are aligned, they must be straight.
The bars on which the wheels will later be located are fixed with glue on the lower part.
A base is attached to the top in an individually selected shape.
The finished frame is upholstered using the same technology using foam rubber, fabric and a zipper on the cover.

For lovers of knitting and stuffing

Lovers of working with knitting needles present interesting models of ottomans knitted with them:

To work, you will need the thickest knitting needles that are available in stores.
For knitting needles with a diameter of 9 mm, fairly thick wool is suitable.
Ordinary threads offered in stores are too thin. The price for them is not high, but due to the fact that you will have to make thicker ones out of them, weaving them together, you will have to purchase a fairly large quantity, which will add to the cost of the product.
You can, of course, cut, unravel, and twist unnecessary knitwear, which takes a lot of time, and finding the right amount of plain knitted clothing at home that has become unusable is quite problematic.
It seems that the solution to the problem of how to make an ottoman with your own hands has reached a dead end, but cotton clotheslines caught my eye.

Attention: Synthetic clotheslines are not suitable for this job, and cotton ropes are difficult to buy in small towns.

For a soft ottoman of sufficient size, you will need 20-30 of these ropes, which are tied into a long rectangle.
The side is tied together with rope to create a spacious, wide skirt.
The bottom is tied with a rope of the same color and you get a bag that needs to be stuffed with something. There are 2 options here - use old items neatly stacked on shelves in the closet or go to the store and buy foam rubber or holofiber.

Unnecessary old items make the ottoman heavy and not as round and fluffy as those made from store-bought materials, but it frees up space in the closet for new clothes.
The top of the ottoman is decorated with the same rope and you can try out your product.

Ottoman from an old bucket

Here is another interesting solution for which we will need: an old plastic bucket, thick jute rope, a hot glue gun, a stapler, scissors, a cabinet handle, Velcro tape, upholstery fabric and a few new microfiber cloths. You will also need cardboard, but it will be better if you replace it with thin plywood.

First, wash the bucket and remove the metal handle.

Next, using hot glue, glue the outer surface of the bucket with rope, starting from the bottom.

Cut the end of the rope and hide it carefully.

Place the bottom of the bucket on the cardboard and trace it. Lay out the upholstery fabric according to the intended template and cut the round blank with a 5-centimeter outlet.

We make a hole in the center of the cardboard and fabric. We pass a bolt from a furniture handle through them and screw on the knob.

Next, we roll the fiber into tubes and radially wrap the bolt between the cardboard and paper, creating a kind of roll. To prevent the fiber from unwinding, we securely fix it with glue.

Then the fabric is stretched and secured on the reverse side with a stapler.

To hide the cardboard marks, cover the back of the seat with another piece of fabric, which needs to be placed on glue.

Cut the Velcro into four equal pieces and stick them crosswise onto the bottom of the bucket and the base of the saddle - with the bristles towards the bucket and the fluffy part towards the seat. Connect the two parts. Hooray! The ottoman is ready!

The result is such a useful craft that you can sit on comfortably.

Laminate is quite sensitive to mechanical stress, so it is better to make an ottoman without wheels and legs, that is, with a solid bottom. On soft surfaces, carpet, ottomans on casters are appropriate, but for tiled flooring there are no restrictions, unless forged legs can be an exception.

Chipboard ottoman

Tools and necessary materials are stocked in advance.

A good ottoman cannot be made without a good base made from a sheet of chipboard. The optimal size of the structure is within 400x400x500 mm.
You can make a wooden ottoman using a simplified technology, making a frame in the form of a mailbox from a timber and screwing it on with the side cuts, but since the ottoman is being made for yourself, you can try.

Work with pleasure

You should not start work in a bad mood: something will fall on your foot or you will hit the wrong nail with a hammer.

5 squares of 400x400 mm are marked and cut from a sheet of chipboard to make the walls of the structure and the bottom.

Attention: The bottom of the ottoman should not be made of plywood; small children like to hide in secluded corners and can break thin plywood and get injured.

The lid can be made in any geometric shape: square, round, oval. Beginners can skip experimenting and stick with a square lid. It will have dimensions slightly larger than the main box 430x430 mm, in order to protect it from falling inside.
The height of the finished product is made up of its constituent elements - the height of the structure is 400 mm, plus the rollers are 50 mm, the bottom and tire are 32 mm thick, the upholstery is 50 mm thick, for a total of 532 mm.
From the prepared elements, the formation of the structure begins.
The sides of the ottoman are fastened with metal corners. The beams that glue all the internal corners will help increase rigidity and reliability.
From the front side of the ottoman, the cutouts themselves are screwed into the beams, the heads of which should be recessed into the wood so that later there are no problems with torn upholstery.
The lower part of the box is coated with wood glue along the perimeter, capturing the ends of the beams.
The bottom of the ottoman is attached, and the cuts themselves are again screwed into the ends of the beams. The assembled structure must dry well.
The base of the ottoman has been made, but there are still no wheels and a lid on which you can sit in the future.
The lid is secured with 4 bars screwed from the inside. The work is carried out after you are sure that the lid closes smoothly and the side reinforcement bars do not interfere with the closing of the lid.
The finished structure is turned over, and the wheels are attached using the cuts themselves.

Attention: They are fixed through the bottom to the ends of the beams, for which small holes are drilled in the bottom.

The ottoman gets dressed

First, the cover of the ottoman is made, for which a soft lining is cut out from foam rubber, padding polyester, and batting. The size of the pad should correspond to the parameters of the seat so that it is neatly glued into place without drooping.
From the fabric intended for upholstery, a blank is cut out to be somewhat larger in size than the lid. This is done so that the edges can be folded under the lid and secured from the inside with a stapler or furniture nails.
The instructions instruct you to further design the sides of the ottoman.
A part is cut out from upholstery fabric 400 mm x 4 = 1600 mm with a margin for connection. Also in height, the material must have an allowance at the top and bottom.

Attention: The fabric must be straightened, stretched, tucked inward, and the edges must be secured with furniture nails or a stapler.

The seat is decorated, the niche is upholstered, all edges are carefully closed and the finished product can be presented to discerning family members for inspection.
A do-it-yourself plywood ottoman is made according to the same pattern if you choose this simple design option.
The work becomes a little more complicated when an opening drawer is provided on the ottoman, then the stop bars are replaced with door hinges.

Although, it should be noted that a neat ottoman, covered with a different material, can bring comfort and convenience to the room and looks no less elegant than a leather one.