home Screw

DIY clothes hanger: types, designs, drawings, manufacturing. DIY clothes hanger: how to make, drawings, photos, floor and wall options How to make clothes hangers

A DIY clothes hanger is a fruitful idea. Theater begins with a hanger; house too. In the sense of spirit, atmosphere, “energy”. The reason is simple: the first thing a guest looks for is where to hang his outerwear. And if the hanger is clearly homemade, but comfortable, stable and durable, the owner is guaranteed a positive reputation.

The second argument for making a hanger with your own hands is prosaic: the prices of purchased ones are clearly disproportionate to production costs. Homemade hanger for clothes will save an amount that is quite visible in the budget. It’s not difficult to make, you only need a little material, and waste from repairs will also be used. In most cases, the tool can be used manually.

These factors are especially felt if a floor hanger fits in the hallway. In addition, it can also serve as a dryer if its design is framed, see below, because On such hangers it is convenient to hang clothes on hangers, and the hanger itself moves away from the wall. If you managed to fence off the house, then a floor hanger best option. Price floor hangers significantly higher than wall hangers, but there is nothing in the design that would not allow you to make a floor hanger yourself.

On the floor or on the wall?

What has been said is already enough to make a choice, as long as there is enough floor space. However, let’s finally look at what makes a floor-type hallway hanger so attractive:

Clothes hung on hangers dry faster and do not stretch; The collar and lining do not tear.
On a hanger approx. wide. 1.5 m will fit a seasonal set of clothes for the whole family, which will save on closet space and space for it.
A shoe rack is naturally attached to the floor hanger, which simplifies the work of equipping the hallway and saves its space.
With the correct dimensions of the hanger, neither the wall from clothes nor the clothes against the wall are damaged.
The mobility of the hanger does not interfere with rearranging furniture; After moving the hanger, there is no need to seal the mounting holes in the wall.

However, there are different floor hangers, and not all of them are most suitable for residential premises. For example, for order (from the old Russian “order” - office, office, office) floor lamp hangers, pos. 1-4 in Fig., hanging clothes on hangers is inconvenient. Due to the small support area, they are rolly, especially when loaded with wet winter clothes. To emphasize the functional inferiority of the product, such hangers are called hangers, and they are often sold under this name.

The best option is the same theatrical wardrobe frame hanger, pos. 5. When designed for residential premises, it is supplemented with shelves for hats, shoes and gloves/scarves; possibly with an additional tie rod, pos. 6. Disadvantage – the “legs” of the hanger get tangled under your feet. In an attempt to get rid of it, they came up with hangers - frames on a stand, pos. 7, but generally speaking, they are even more rolls than ordered hangers. Another option is a frame hanger without legs, leaning against the wall; We will remember this one again. There are also folding frame hangers, but they have almost no advantages in everyday life.

If space is generally tight in the hallway, then a wall hanger is still more suitable. Simple wall hanger-sconce, pos. 1 in Fig., is as compact as possible, but no more convenient than an orderly one, except that it won’t fall to one side from the next jacket. Hanger-shelf, pos. 2, will not fall off if attached properly, and hats/caps from it too, but the wall and clothes rub against each other.

Wall hanger-panel, pos. 3, saves the wall, but not clothes. Leather items wear out the most on such hangers. Tanners jokingly advise: how can you tell a sheepskin coat made from full-grain leather from one made from reverse leather? The first one, with everyday use of the panel hanger, loses its appearance in 2 winters, and the second - in half a winter. Considering the cost of products from genuine leather, this is no good. Therefore, wall hangers for expensive items often provide soft upholstery, pos. 4. As for wall hangers with openwork panels, pos. 5 then in in this case its meaning is only decorative: it does not protect either things or walls.

There are also floor hangers-panels with a stand, for example. in the form of a cabinet, chest or chest, pos. 1 in Fig. on right. This is not the best option: someone will someday put something on the lid, and the clothes being removed from the hanger will knock it onto the floor. Much more practical are floor hangers-panels with a bench, pos. 2. A flower under the seat is a matter of taste for the owners, if only it survives there, but a shoe rack or a chest for accessories for its care is in the drawer of the banquette.

Clothes and keys

Regarding panel hangers, the amateur craftsman has additional opportunity, namely: to provide such a sidewall on the farthest from front door edge. Perhaps not reaching the bottom, with a bevel or notch. Factory ones don’t do this: the hanger should be designed for clothes to stick out from the side. One sidewall almost does not interfere with this, but it is unknown how the hanger will sit with the buyer, and making right and left hangers is expensive.

What does this add-on provide? A place for a key holder, invisible from the threshold. There, on the side, there may be a dressing table or a cabinet, but the main thing is that the owner’s keys will not catch the eye of a casual visitor, and they are in plain sight, as criminologists say, a serious factor in spontaneous illegal actions, without which, i.e. temptation, a visit from a not entirely trustworthy subject would have turned out well for both the hosts and him. You can, of course, have it luxuriously decorated and with a secret lock, but this is a lot of work and costs for materials. Otherwise, a simple board with hooks will do. Or just hooks screwed to the side of the outside of the storage section.

Let's assume that a suitable design has already been chosen, and let's move on to how to make a hanger. Preferably wooden: the material is noble, natural, easy to process. Let's not forget other versions; in some cases more convenient. Let's start with floor hangers as the most functional.

Floor-standing

Those who love to craft from the heart and have a wood milling tool at their disposal can immediately take up a floor-mounted frame hanger with legs. Made from fine-grained hardwood (oak, beech, hornbeam, walnut, birch), it looks luxurious and takes up only 360 mm of floor space.

A suit hanger works well as a prototype, you just need to make it taller and move the trouser bar up so you can hang hangers on it. Instead of a tie rod and handles, you can install a shelf, and a shoe rack is mounted below. Drawings of such a hanger are shown in Fig.:

With the other dimensions indicated, the structural and overall width (sizes 430 and 460 respectively) without compromising strength and stability can be increased by 1-1.4 m, i.e. the hanger will be narrower than family width up to more than 1.8 m. Self-orienting wheels, if full mobility is needed, can be installed without problems.

About hooks and traps

Bags, umbrellas, scarves are also left on the hanger, and a bachelor’s skirt and lingerie may also be there. Sometimes life is life. It is also more convenient to hang clothes on hooks for a short time. Therefore, in frame hangers, sometimes slider hooks are put on the main rod (formerly the trouser rod in Fig; height 1360). They or the hangers, depending on the need, are moved to the side en masse. But the sliding hooks under the fingers turn out at the most inopportune moment. In a hanger of this design and similar ones, the problem is solved simply: the main rod is for hangers, and the fixed hooks are attached to the top board.

Pipes and profiles

Original hangers are made from round or profile metal or plastic pipes, see fig. However, despite all the design tricks, their organic defects do not disappear. The same ones that hanged the orderly. But it adds high labor intensity: in order to hide the connecting nodes, you have to really strain both your hands and your head.

It is better to make a square base for a floor lamp hanger from pipes. With the same floor area removed, the distance between the support points increases by 1.4 times. If you make the base even heavier, a hanger up to 1.7 m high turns into a full-fledged hanger. Most suitable sewer pipes 60 mm.

A short master class in pictures on making the base of a floor hanger from pipes is shown in the following. rice. Pipe sections are 150-300 mm, depending on how much floor can be given to the hanger. In addition to them, you will need 3 straight tees, 4 right angles and 4 plugs. Connections are made using propylene or PVC glue, depending on the pipe material. Weighting - sand or small crushed stone.

One of the comments to original design begins with a question something like this: “Why couldn’t you just solder it?” Judging by the fact that later in the same comment the 90° angles are called bends with an obvious claim to professionalism (plumbing bends are oblique tees), 2-3 more and the same number of exclamation marks suggest themselves in addition to the question mark.

Nevertheless, the author of the product, even if she did not know plumbing terminology, solved the problem quite like an engineer. The hanger doesn't need sealed joints, and a tube of glue will cost much less than renting a soldering iron for propylene. Which you also need to learn how to use, spoiling a lot of the material. For greater reliability, you can reinforce the connections with phosphated (black) self-tapping screws: their heads are not visible on black, and the strength of the hanger will not be reduced.

Note: the top in the original design is also made of pipes, but its design, frankly speaking, is not that... It would be better to drill inclined holes in the rack and insert some strong pins into them using the same glue; wooden, metal.

Simple frame

A frame hanger made of pipes can be without legs, simply leaning against the wall at an angle. However, its slope must be negative. There should be at least 350 mm between the wall and clothes on hangers. If the tilt of the frame is positive (the upper crossbar is adjacent to the wall), then the lower one will “move away” from the plinth by 500-600 mm. In a small hallway this is a serious inconvenience. In addition, they will either cling to the bottom crossbar with their feet and it will break the floor, or they will have to fasten it to the floor, and this is really bad: any violation of the flooring is fraught with complex and expensive emergency repairs. Have you ever seen furniture on sale that needs to be screwed to the floor? Except that special purpose, eg. rack. And then, they also try to make do with fastenings to the walls and, in extreme cases, the ceiling.

The diagram of a frame hanger with a negative slope made of pipes is shown in Fig. The materials are the same: sections of straight sewer pipes 60 mm, 90 angles and straight tees. Seized usable area gender – zero. Below there can be a shoe rack or a banquette. For fastening to the wall, so as not to drill a lot and do without expensive collet anchors, it is better to take a couple more tees: with their help, the holding beams - guy wires - are attached to the wall with a pair of self-tapping screws in dowels each.

Wall mounted

Simple panel hangers do not require any special disassembly. How to make a wooden wall hanger, see e.g. video.

Video: DIY wall hanger made of wood

Here we remember, firstly, about the sconce hanger. Folding, it can be very useful if a large company has gathered or the kids have returned from the yard.

An example of this type of design is shown on the right in Fig. However, its creators were clearly guided by the principle: “Consumption is the basis of turnover Money" The outer (folded) side of the flap is inactive and requires a locking mechanism. And a separate hanger for every day.

Meanwhile, folding wall hangers have been known since Ancient Egypt. In the climate there, outerwear was worn occasionally, in bad weather, but after wearing it it was necessary to dry it. There was no point in keeping a separate hanger for this in areas where it rains and is cold not once a year, so they came up with one like the one on the right in Fig.

When folded, the compact Egyptian wall hanger was secured with a cypress stick. Now, of course, you can install a ball retainer or just a hook. The main thing is that the hook hooks should be 3/4 of a circle, then nothing will fall off them even with the bar folded back. And without need, the whole hanger looks like just a stick on the wall; You can hang bags, umbrellas, and keys on the hooks.

More about hooks

An original wooden hanger can be made without any metal at all, not counting the fasteners. Do not rush to throw away the New Year's pine or Christmas tree (only the blanks will need to be turned upside down):

Video: original DIY wooden hanger

Such a hanger will look best in a country house, in a timber or frame house. Depending on the interior design – even in a city apartment. It will go well in the bathhouse: touching steamed skin to metal is both unpleasant and, to some extent, even dangerous.

Hangers for the nursery

Probably all children throw away their clothes. There is no need to particularly scold them for this: without experiencing chaos within reasonable limits, you will not get accustomed to order. Who is against it - answer Friday’s question to Robinson Crusoe: “Why doesn’t the devil kill God?”

However, it is necessary to teach children to handle things properly. Only a children's hanger, so as not to cause obvious psychological rejection, should look somewhat disordered. It is also highly desirable that the child associate it with his favorite game or hobby. Examples of “game/hobby” type wall hangers for children’s rooms are given in pos. 1 and 2 fig.

A universal method of this kind is a tree hanger, pos. 3. In the contour of a tree, as in any fractal structure, order and chaos interact and complement each other, giving rise to a harmonious whole. Just don’t forget to make the wood stronger, e.g. from plywood from 12 mm, and properly, in increments of no more than 250-300 mm, attach to the wall with self-tapping screws from 6 mm in propylene dowels. A tree is meant for climbing.

Floor hangers in a nursery are undesirable for the same reason: well, they will climb anyway and crash. Therefore, if you want a floor hanger for the nursery, you need to make one that you can’t fit on, as can be seen in pos. 4 and 5.

About cutting plywood

In any case, parents are faced with problems that little ones don’t care about yet: material consumption and labor intensity. Drawing a complex contour along a grid on a single sheet of plywood is no longer easy; then you need to cut it out precisely, which is even more difficult. And in the end it turns out that 60% or 80% of the material went to waste, no longer suitable for anything. On the contrary, you need to make a children's tree hanger from waste. Or cut a whole sheet more tightly.

The method for this has long been known: element-by-element cutting and assembly. If the tree is plywood, for complete strength of the finished product, each part is assembled from 2 layers, leaving the corresponding folds and grooves, see fig. Fragments of blanks are assembled using PVA glue, wood glue or “Express” (liquid nails). If the assembly is made of PVA, the fragments must be additionally fastened with small snake nails in increments of 100-150 mm with a distance of 30-40 mm from the edges.

The wooden hanger is assembled using the same adhesives, but now each connection must be secured with wood screws and an envelope. Then the gaps and fastener heads (they need to be recessed during assembly) are rubbed with putty made from sawdust of the same plywood on PVA. Such wood will look solid even without painting, only under varnish.

Note: Just in case, let us remind you that before assembly, all wooden parts of any wooden hanger must be sanded with fine sandpaper and treated with a water-polymer emulsion or PVA diluted three to five times with water. After impregnation, before further work, a technological break is taken until the part is completely dry (1-3 days, depending on its size).

And one last thing about hooks

In the illustrations above, you most likely noticed the curved wooden hooks and other details of the hangers. It is quite possible to make them at home. In production, dense, fine-grained, defect-free wood or waterproof birch plywood (BS grade) is bent by heating with steaming or dry, but for homework these methods are too complicated. Only bamboo is steamed more or less simply: the workpiece is boiled for half an hour or an hour in rapidly boiling water, after which it is bent by hand. In the case of bending according to a template, the workpiece must be quickly tied to it, before it has cooled down, with a wide cotton braid or a strip of natural tarpaulin.

At home, it is easier to cut blanks of the required configuration from a sheet of plywood (any) or MDF of the required thickness or, twice or four times as much in quantity, from thin sheet material, in order to then collect as much thickness as required. Cut with a finishing allowance of approx. 1 mm. The cut blanks are tightly pulled together in a package in a carpenter's vice or in a mechanic's vice through spacers made of thick plywood and processed with a wood rasp to size, and then sanded clean. One rasp is enough, with flat and semicircular working surfaces, see fig.

The blanks are assembled into parts using the method described above. The end surfaces, if it is necessary to hide the layered structure of the plywood, are sealed with strips of self-adhesive wood-like film. After this, the part is varnished twice or thrice with acrylic varnish on water based; nitro varnish can damage the self-adhesive. There is no point in edging (edging) with a plastic furniture edge: you need to accurately select the groove for the edge anchor, which requires a milling machine, but on curved surfaces of great curvature and short length, the edge still does not hold well. And parts covered with self-adhesive tape, varnished, and solid wood cannot be immediately distinguished even by a master cabinetmaker.

If several people live in your apartment, then there will definitely be a need to store and place the wardrobe of each of them. And then you can’t do without such a device as a clothes rack. This design will fit perfectly into both a spacious room with a dressing room and a small hallway. Such a stand would be very appropriate in a country house.

Advantages of floor racks

The clothes rack is very easy to disassemble and assemble. And most importantly, this does not require special skills.
If you store clothes on hangers, then as a result they will not cake or wrinkle; appearance will always be flawless.
The cost of a floor stand compared to a cabinet is much less.

DIY floor rack for clothes

Quite often, there are not enough hangers in the hallway and not many things can be placed on them. And sometimes you need to place your shoes there. In this case ideal option will be a floor stand made of metal pipes of small diameter (15-25 mm). You will also need screws, a drill and, if necessary, furniture wheels if you plan to then move the rack to another room.

Step-by-step instruction

The process of creating this design is as simple as possible.

The vertical base will be long pipes (1.4-1.8 m) - 3 pieces.
Shorter pipes (0.8-1.0 m) - 4-5 pieces - will be used as lower horizontal crossbars. In this case, one of them is fixed in the lower vertical axis. The remaining pipes are screwed tightly to it, thereby creating the bottom of the rack.
A crossbar of similar length is fixed horizontally on top, fixing the verticals.
Next, perpendicular to it in the same plane, it is necessary to screw the products, 0.4-0.5 m long. In the same way, they are fixed at the ends.
Subsequently, hanger hooks will be located on this crossbar. At the same time, the lower base, due to its area, will allow you to keep the structure vertical.
So, the floor rack for clothes is ready. If necessary, it can be placed on furniture wheels, which should be placed in the corners around the entire perimeter.

Wooden clothes hanger

A DIY wooden clothes rack is a budget option. And the main thing is that you definitely won’t find one like this in a store. On it you can place various clothes: robes, dresses, T-shirts, shirts, belts, ties and much more.

Design detailing

It will look like this.

For the lower fastening element (floor legs) you will need boards measuring 15 x 30 x 360 mm.
The middle element (racks) will be made of planks 20 x 30 x 280 mm.
For the upper fastening element (hangers), you will need to take boards measuring 20 x 80 x 460 mm.
For a short rack we take strips 20 x 50 x 763 mm.
Boards measuring 20 x 50 x 1003 will be required for the long rack.
As connecting element you will need to take three types of blanks, 460, 430 and 390 mm long, of the same diameter - 18 mm.
Each structural element must be made of dry planed boards. Sharp edges are rounded using sandpaper.
Then holes of the required diameter are drilled. It is advisable to treat the wood with an antiseptic and then cover it with a decorative composition.
The rack parts are connected to each other using chrome wing nuts, threaded rods or oversized washers.
The racks are held together by chrome plated metal pipes or cylindrical wooden elements of appropriate length. This is done using glue.
Hangers are installed on top. The planes of the joined elements are treated with glue.
Thus, the wooden clothes rack (photo shown above) is assembled. Such a stylish detail can decorate the interior of any hallway.

A wall hanger is the first thing that visitors pay attention to when they cross the threshold of an apartment. This piece of furniture is designed to accommodate outerwear, hats, as well as things that are not convenient for indoor use, for example: an umbrella, a bag, sunglasses.

In contact with

Classmates

Benefits of using a hanger

When planning to make a hanger with their own hands, craftsmen ask themselves the question: how to make it meet all needs and have an aesthetic appearance? Because the skillfully selected design of this product immediately immerses household members in the atmosphere home comfort and comfort. But the hallway space is not always conducive to placing huge and clumsy cabinets; sometimes a wall or floor hanger will fit better and more organically into the interior.

The main types of hangers depending on the fastening:

- floor - is a structure standing on the floor and which consists of an upper compartment where hats and outerwear are located, and a lower compartment intended for bags, umbrellas and other things;

- wall-mounted - is a structure made of boards with hooks, which is mounted on the wall. As a rule, wall hangers are combined with shoe cabinets;

— ceiling - this interior element is attached to the ceiling and has weight restrictions;

— mobile - this type of hanger does not provide for its fixed placement. It is used only as an addition to the main hanger. If necessary, you can always take out a mobile hanger to hang outerwear or things that do not fit on the main hanger.

Tools needed to make a hanger yourself

Making a hanger in the hallway with your own hands is very simple. But before you start working on its manufacture, you need to ensure that you have the following list of tools and materials:

- sander;

- self-tapping screws;

- jigsaw;

— confirmats are a special connecting screw that is used to tighten wooden parts of various products. Such screws are widely used in furniture production;

— or laminated chipboard;

— furniture edge is a material in the form of a narrow strip that is used to seal the end side of wooden furniture parts.

Depending on your flight of fancy, the list of materials from which you can make a hanger increases.

Materials for making hangers

Today there are many both artificial and natural materials, from which you can make a hanger in the hallway. But at home, it is a wooden hanger that looks most organic and cozy. It is environmentally friendly as it is made from natural materials, durable and proper care- also durable.

Note!

The different structure of wood, as well as the use of special furniture dyes, make it possible to give the product almost any color.

In addition to wood, hangers are made of metal, plastic, and can combine several different materials. But such hallways are most often found in the premises of large corporations, international companies, etc., as they are more consistent with office style.

Stages of creating a hanger

Before you start work, you need to think carefully about what kind of hanger it will be, where it will be attached, you need to come up with not only original design, but also so that the new piece of furniture also remains practical and comfortable. To do this, it is advisable to draw the product on a piece of paper, so it will be easier to see what the final result of the work done by yourself will be.

After completing the ideation stage, you need to make a list necessary materials for making hangers. At this stage, you need to decide what material the hanger will be made from, calculate how many consumables and basic materials are needed to make it.

Hanger diagram

Features of making hangers

When making hangers of any type, you must take into account that clothes can be different, large or small, children's or adults, fluffy or narrow. Therefore, to make the hanger more practical, you need to select different hooks for clothes, and it is also advisable to place them at different heights. In addition to clothes, it is customary to leave various things on hangers, such as Cell phones, bags or keys. To ensure that these things do not get lost, you can provide the necessary niches, a shelf or a special hook in the design for them, which will only be used as a hanger for keys or for bags.

Wall hanger

To create a simple wall hanger use regular boards, which can be purchased at any hardware store or supermarket. The process of creating a wall hanger looks like this:

1) Purchased boards are carefully sanded and cleaned using sandpaper or a grinder;

2) Then the surface of the boards is primed with water-based varnish;

3) In order for the surface to be smoother, when all the boards are dry, cleaning can be repeated;

5) Then, once the boards are dry, use a screwdriver and self-tapping screws to connect them together. This creates the base for the hanger;

6) Then, to add more functionality to the future hanger, a mirror is attached to it using special glue;

7) As a rule, all wall-mounted wooden hangers are made with upper shelves for placing hats. For this purpose, pre-prepared boards are screwed using confirmations to the base of the hanger;

8) Well, the last final stage is attaching coat hooks to the frame of the product.

floor hanger

Most often, such a hanger is made of laminated chipboard or chipboard. This gives an advantage in choosing a color, since the variety of shades of such wood materials is very large. In order to beautifully and correctly make blanks for a future hanger, you need special furniture machines, so it is recommended to contact any furniture shop where they can quickly and efficiently cut wood boards, as well as glue an edge to its end sides. Then the ready-made basic elements can be connected together using a screwdriver and confirmations in accordance with the layout. And at the very end, attach hooks for clothes. And the DIY clothes hanger is ready.

Special hangers

As noted above, in addition to clothes, hangers in the hallway are also used to place various wardrobe items and accessories that should always be at hand when going out into the yard. Therefore, it is also important to provide special places in the design of the hanger where you can put or place various small and not so small items, for example: glasses, keys, umbrellas and, probably, one of the main elements of a woman’s wardrobe - bags.

Note!

A hanger for bags is a necessary element of any hallway; as a rule, it is placed at some distance from the place where clothes are located, so that, if necessary, there is uncluttered access to the bag.

It is also advisable to place keys in a special secluded place on a hanger so that to a stranger it was difficult to find them, and the owner always knew where they were.

DIY hallway hanger video:

In contact with

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos on the topic for publication?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

We come home and take off our outerwear. To keep it from lying around, we hang it on a hanger. This way, clothes don’t bother us and don’t create chaos in the apartment. You can always quickly find a jacket or coat by looking where all the clothes hang. If you have a small hallway and there is nowhere to put a closet, then a hanger will solve all the problems. This attribute happens different sizes. Therefore, you can choose a hanger, despite the size of the hallway. Their designs are varied, but you have the opportunity to make a hanger according to your own sketch.

A hanger is a necessary thing if you often have guests. Guests can hang their things on it when entering your corridor. Hangers are usually located near the front door, so as not to walk around in shoes throughout the hallway. Now their variety is great. Finding a suitable hanger that fits into your interior is easy. You can make it yourself using an individual design.

For a hanger to perform its functions, it must be:

Convenient;
Light;
Reliable.

You have decided to make your own hanger. Then you need to know in advance what it should be. You need to remember what the hallway walls are made of.

If the walls are made of plasterboard, you should think about a floor hanger. Then you won't have to mount it on the walls. Mounting a hanger on plasterboard walls is difficult.

Installation on such walls involves the use of special equipment, tools and dowels. Such a wall may not withstand the load from a large number of things, then the hanger will fall.

Floor models have several hooks. If you hang things evenly on it, it will not fall. This attribute is light in weight and can be moved to a new location if necessary.

You can make a hanger with your own hands from simple materials: wood, fiberboard or chipboard. Then decorate it beautifully - paint it or apply a suitable design/ornament.

The most common material for making hangers is wood. It is easy to make a certain shape from it.

Birch is not the best best material for making hangers. Wood has a fragile structure, so when screwing in fasteners, there is a high probability of damaging the finished product.

Almost everyone has the materials you need in their home. A set of tools and materials for work: jigsaw, hacksaw, sandpaper, hooks, screwdriver, boards.

Take boards of the required size. You process the wood: you sand it. Then go over the entire surface with sandpaper until it is perfectly smooth.

You can decorate according to your taste. You can cover the boards with varnish or paint. Attach the hooks to the board using a screwdriver.

There are two types of installation for mounting the finished product on the wall:

First: You can attach the hanger to the wall by drilling through it.

Second: Make loops on the back of the hanger and then hang them on nails.

The hanger is ready and can be used for its intended purpose.

We make original hangers for the hallway with our own hands

The hallway is the first room in the apartment. Therefore, guests pay special attention to it. You can add an original hanger to the interior of the corridor and make it yourself. This will attract the attention of people who decide to come to visit you. And you'll put all their stuff on original hanger: clothes, umbrellas, bags and various accessories. Transforming your hallway and making it beautiful is easy, quick and inexpensive.

Any person in the house will have unnecessary things that can be used to make a hanger. Boards, skis, boxes, old furniture, - all this can be used as the basis for an original hanger.

You should attach hooks to the skis, screw the entire structure to the wall - the hanger is ready for use.

A clothes hanger can be:

standing;
Wall-mounted;
Consist of separate hooks.

For classic design In the hallway of the room, a wooden or metal hanger in discreet (natural) colors is suitable.

An original solution is a hanger consisting of separate hooks. They hang on the wall itself. Hooks may have interesting shape, color and design. For example, in the form of raindrops arranged in a chaotic manner. You can attach the hooks yourself without using additional tools.

What are hangers and hooks used to attach?

Hangers and hooks have several types of wall mounting. You can attach them to the wall yourself without or using special equipment. For wooden hangers Metal hooks are suitable. They screw on additional fastening– with screws.

Hooks for hangers can have the following type of fastening:

Suckers;
Special adhesive strip;
Magnets.

All three types of fastenings that the hooks are equipped with do not require much effort and time to install.

It is worth remembering that these types of fastenings may not support heavy clothing (fur coats, down jackets). These hooks are used to hang hats.

How to choose the right hanger for the hallway

Before purchasing or making a clothes hanger, you should keep many things in mind. You need to take into account the free space and design of the hallway of the room, where to put the hanger or at what height to hang it.

Tips for choosing a hanger:

It should be in harmony with the design of the room;
For lovers of minimalism, floor-mounted suit models are suitable;
For a classic style, wall-mounted models are suitable;

The floor hanger is lightweight. It can be quickly moved or removed. Many people choose this type of hanger for their hallway.

How to make a hanger in the hallway with your own hands (video)

Every apartment should have a hanger in the hallway. It is a practical attribute in the interior. Occupies less space than cabinets. Can hold a large number of clothes. Each item hangs on a specific hook, and you spend less time looking for it. Everything you need to take with you outside - a bag, an umbrella, a hat, a scarf and a coat - can be in one specific place near the front door. Therefore, it is worth thinking about purchasing or making such a wonderful device for your hallway room.

Design a hanger for the hallway with your own hands (photo examples)

The corridor of a cozy living space begins with an important attribute - a hanger. Thanks to her, you can restore order in the hallway. You can buy this irreplaceable piece of furniture, or you can make a floor hanger for clothes with your own hands. If you have basic skills, desire and a sketch of a finished attribute, then you shouldn’t stop, you need to do it yourself.

To make the hallway cozy, you need all the furniture in it to be perfectly matched in color and style. This is a troublesome matter and must be approached with full responsibility.

Hallway in standard apartment It is very small in size, so it is not possible to put a wardrobe or chest of drawers there. But a clothes hanger is a must, it will be the only item that attracts attention.

To make your hallway different from others, you need to make its main attribute with your own hands. This will not only increase the owner’s rating, but will also create a unique atmosphere in the entire apartment.

There are many product models. They are used for clothing and small accessories. There are wall and floor structures that “do their job” equally well. You can make any of the two options yourself, the main thing is to imagine exactly how it should look when finished.

Advantages and disadvantages

If in small corridor there is no space, then you can make a small, unusual hanger. It will serve both for clothes and for umbrellas or bags. It’s very easy to make a wall-mounted clothes hanger with your own hands. Suitable materials:

tree;
plastic;
metal.

The advantage of the design is:

compactness;
functionality;
variety of forms.

This model is suitable for a small hallway. In addition to hooks, you can make shelves for storing hats, gloves and other accessories. You can put shoes under it, and you can hang bags and umbrellas on additional hooks on the side.

To make such an irreplaceable item, you can use various materials, combine them using your imagination.

Its disadvantage is its stationary nature and the installation itself, during which you have to drill holes in the wall. If installed incorrectly or loosely, problems may arise in subsequent operation. And if during the rearrangement you want to move it to a new place, you will need to dismantle the hanger and repair the wall.

The simplest model of such an accessory for the hallway is the plank, on which the hooks are nailed. The description was not colorful, but if you use exclusive material to make it, then the product will turn out exclusive.

If a wooden plank is taken for the product, then it can be processed using different methods: sanding, painting, etc. Hooks for hangers can be made of real wooden hooks, metal hooks, door handles and other material. They can all be the same or different, which looks very unusual.

To ensure that your child always undresses himself, he needs a funny hanger. In this case, you can look for children's hooks in the form of cartoon characters or favorite animals. Since children's things are not so heavy, any interesting plastic toys, for example: balls, cups, etc., can serve as hooks for the product.

Small rubber animals can be attached to the bar using superglue or special glue for rubber.

To make the hallway in your house look original, you can nail different hooks to the wall in a chaotic order, with hooks for the child at the bottom.

Old forks or spoons Don't throw them away, they can be used to make excellent hanger hooks if you bend the end slightly. If old, unwanted skis take up space in the closet, then they can also be used as a hanger bar. It’s worth refreshing them a little with paint and nailing them down decorative elements, which will be the hooks. Seeing such beauty, made yourself, your guests will envy you.

For those who do not know how to work with wood, but want to have an original product, there is a way out. In the store you need to buy a special decorative self-adhesive film that imitates a wall hanger and stick it to the wall. All that remains is to choose the material for the hooks and attach them to the wall.

You can find many fresh ideas, as well as master classes on making wall structures, on the Internet.

The designs of flooring products vary, so not all of them will be suitable for living space. Let's look at their options in more detail:

Advantages and disadvantages

This item is not only functional, but also stylish. By showing your imagination, you can give the product the most unusual shapes. The advantage of the hanger is:

mobility;
absence installation work;
large selection of shapes.

Mobility- an important design feature that becomes more noticeable during repairs, when rearranging, and even when completely changing the style of the room.

When installing a floor accessory, there is no need to make holes in the wall and spoil the decorative covering. If you don’t need a hanger in the summer, you can simply move it to another place or hide it in a closet.

Models of floor hangers differ in size, material and shape. A handmade product will fully correspond to your tastes and the chosen style of the room.

Most floor structures have one drawback - questionable stability. Before you start making it, you need to ensure maximum safety and stability. A so-called sole must be attached to the back of the support leg so that the material does not scratch or damage the floor. The hanger should not have any sharp components that could damage clothing.

This model will be different from the wall model, since its location will require a little space on the floor. Making the product yourself will be more difficult, but this will not stop a person who is trying to decorate the interior of his home with exclusive items.

From old wood

The easiest option is to use old wood painted with paint. Of course, its trunk must have strong branches that will serve as hooks. The stand for such a hanger can be any heavy flat object, the shape of which does not matter.

If after repair you still have wooden stairs, then they will make a wonderful hanger. Select the length of the strip that will hold the stairs together. It is nailed on top so that one ladder is on one side and the other on the other. At the height of the first or second step, a shelf is made from a board from below. Its edges are also secured with nails.

Depending on how many steps does the staircase have?, and what clothes will hang on this hanger, you can make another shelf. Things on this model hang on hangers, which makes them always straightened and well-groomed. By the way, it can be painted in any color you like. The main advantage of this design is that it can accommodate a significant amount of clothing.

To make a floor lamp hanger at home, you can use round or profile metal or plastic pipes. To get a stable product with a height of 1.7 meters, it is better to take 60 mm sewer pipes. It is better to make the base square. Detailed master class instructions for making such a design can be found on the Internet.

If you have an old floor lamp in stock, then it can be used as a basis for the product. You need to remove the old lampshade and remove the wire. Come up with hooks, or use a wire lampshade frame. If the leg of the floor lamp requires painting, then you need to carry out preparatory work, and only after that - paint the product.

A handmade product with forged metal elements will look very beautiful and original. Models of the design can be found on the Internet, forged elements can be ordered from masters of artistic forging. To assemble a hanger from the received parts, you will need welding machine. After connecting the parts in single design, you need to degrease it with a solvent and then paint it.

Forged hangers always look stylish. They can complement the interior in classic style. Openwork forged metal elements combine perfectly with the attributes of various styles.