home Screw

Expanded polystyrene corners for wall decoration. Decorating corners in an apartment. Advice. Finishing external corners from plasterboard should be done in the same way as leveling the walls in the room. That is, if the frame method is used, then the angle should

In an apartment, protruding wall elements are the first to receive mechanical damage. They get scratches when exposed to various objects. To preserve an attractive appearance for a long time and protect arches, openings and other important areas of the wall from destruction, plastic corners are used. They are available in a wide range of shades. You can choose bright ones decorative elements or give preference to transparent models.

How to protect corners

The profile allows you to hide any kind of defects. The walls acquire clear lines. Any kind of blow falls on these protective elements. Thanks to this, wall finishing materials retain their visual appeal longer. It is possible to avoid repairs, at least for the next few years.

According to the scope of application, plastic corners are usually divided into:

Corners can also protect wallpaper from peeling. It is possible to select corners according to their appearance, depending on the features of the interior. For example, if the walls are covered with clapboard or boards, you can install products with imitation of various types of wood on them. The end part of the material is protected from moisture and dust.

To make profiles for walls use:

polyvinyl chloride;
wood fiber material - MDF;
polyurethane;
aluminum in alloys and pure form.

When making plastic corners, special paint is also used. It ensures the brightness of the corner and protects them from fading in direct sunlight.

Finishing arched openings and corners

Plastic profiles used in finishing arched openings are characterized by flexibility and

Availability of a wide range of sizes. You can stick them on openings with smooth lines without making any cuts. There are colored ones decorative models. It is advisable to install models one tone darker than the paint on the wall or wallpaper. The arch line becomes clearer, thereby emphasizing the interior and its style.

If the floor in the room was laid wooden planks or laminate; decorative arched profiles with wood imitation are suitable for it. To protect corners, there are also laminated products on the market.

The width of colored plastic elements is selected in accordance with the following parameters:

arch width;
room dimensions;
the thickness of the wall on which there is an opening;
ceiling height.

The recommended corner width increases as the parameters increase. If there are large interior elements, a narrow decorative corner for the walls can simply get lost. A wide one will look unnatural if it is placed in a small hallway.

The length of the arched corners does not exceed 3 m. It is enough to take one ready-made strip to carry out the finishing. Over time, the joints will begin to protrude, so it is important to initially lay them symmetrically.

The upper arc must be glued, starting from the central part of the arch. After this, you need to carry it out in both directions. After this, it is important to dock on the sides. Then the ends must be cleaned and glued.

Colored corners for tiles are made of aluminum and its alloys. They arrange a coating on it and polish it to a mirror shine. Varnish is applied on top or laminated. Thanks to this technology, the protrusions are reliable protection. The decorative characteristics of the room are improved.

On one side of the profile there is a perforated strip equipped with slits. Lay on the surface of the wall or on steps. The opposite side is decorative. On the opposite side it has a small internal protrusion. The side end of the tile is inserted here when the corners are laid. It is important that it fits tightly.

The tile profile is not only intended for decorative design. It makes surfaces smooth during finishing works. Three-sided elements are provided for protruding corners. They allow you to close connections in three planes. They are placed at the junction of finishing profiles located at right angles.

These products have two sides. One of them is narrow. The structure fits tightly in those places where the frame meets the wall. If the corner is made of MDF, it is better to place it outside.

A good solution would be to use them for doors, windows, loggias and balconies. The strips are able to securely close polyurethane foam, protecting it from moisture and sun rays. Their decorative qualities are excellent. When facing slopes, they are not a mandatory component. You can use putty with further painting and sealant.

Bathroom corner

PVC corners intended for sealing joints in the bathroom are usually designed in white light. You can also use color options if the bathroom is decorated in modern design. The corner has the ability to protect walls from moisture. Also, its use serves as a good prevention of fungus. Plastic corners of various shades are used to protect both convex and concave corners of walls, washbasins, shower cabins and installations. There are special PVC borders for installation under tiles.

Profiles for external and internal corners

Perforated PVC profiles used to level corners when finishing with plasterboard or regular plaster. It is fixed directly to the solution, which is applied to the finishing sheets. It turns out that they take on the function of beacons. They also further strengthen the walls.

Best used for outdoor work hardware. Plastic corners can be used when it comes to faking oblique angles. They are able to bend and take the shape of the surface on which they are fixed.

For skirting boards and ceilings

Once the frame suspended ceiling covered with PVC film or plasterboard, it is necessary to carry out additional finishing of the protrusion. To make the skirting boards fit better to the surface, concave elements are used. They can be of different colors and match the appearance of the cladding. Skirting boards are designed for maximum adherence to the wall. But sometimes it happens that wires or pipes for heated floors are located behind them. Therefore, it is necessary to leave a slight gap for the expansion of linoleum and laminate.

For this purpose, you can use a profile of the same shade as the baseboard. The corner must be secured to the opposite surface, allowing the material to move freely in case of deformation. To finish corners when working with multi-level ceilings, polyurethane profiles are used. They have sides 10 and 15 mm long. These products are flexible and easily follow the shape of the protrusion. In most cases, white models are in demand. The profile is not a mandatory element for attaching projections to the ceiling. It is used only when necessary.

Corners, regardless of the room where their capitals are, are internal and external. Internal corners are difficult to reach, but external corners are almost always open. For this reason, they suffer more often. They are scratched by pets. Often, when moving furniture and household appliances through doors, scratches form on them.

The materials most often used for finishing corners are:

Plastic corners hold a confident lead because they:

presented in a wide range of shades;
Quite flexible and can adapt to any surface.

Installation of plastic corners is carried out only after all other finishing work has been completed. Fix them on the walls using mounting adhesive for plastic products. The length of the corners reaches 2.5 m. The width varies, so the profiles can be either narrow or wide.

To select the corner width correctly, you need to measure the curvature of the corner. If this indicator is large, it is better to take profiles of greater width. For beginners in the field of finishing work, we can recommend medium-width corners.

The algorithm for fixing a plastic corner on the wall surface is as follows:

Angle deviations are measured using a building level.
Mix the solution based on the dry putty mixture to the required consistency.
Apply the finished mixture with a regular spatula and level it using an angle tool so that the corner takes on a rectangular shape.
As soon as the corner is completely dry, apply a perforated PVC corner and cover it with a layer of finishing putty.
After the material has completely dried, the surface is sanded using an abrasive mesh.

PVC corners are always installed on a previously prepared surface. If necessary, remove old wallpaper with a drywall knife and remove the paint layer.

Further algorithm of actions:

Apply glue to the inner surface of the corner at a distance of 30 to 50 mm. This should be done as if drawing a dotted line.
After some time, the glue acquires optimal viscosity. You can read about the desired consistency in this case in the instructions for the glue. These indicators are individual, depending on the manufacturer.
Apply to the surface of the corner plastic profile and secure on top with masking tape.
To fix the corners, you can use liquid nails or colorless silicone.

Corners made of polystyrene foam

Expanded polystyrene is a non-flammable material. Corners made from it have the following advantages:

do not remove dirt;
do not absorb moisture.

These products can be used in rooms with different temperature conditions. Such profiles can be painted. They are created by pressing and are available in various forms.

The use of polystyrene foam corners in finishing can be considered justified if the apartment has low traffic levels among residents. Such decorative elements not only protect corners, but also perform an excellent aesthetic function. They are fixed like with special glue, as well as regular acrylic sealant.

Wooden models

Wood products also have a number of advantages:

decorative appearance;
environmental friendliness;
possibility of arranging threads.

do not use wooden corners in rooms with high humidity;
If there are regular temperature changes in the room, the use of wooden corners is not recommended.

Stone for decoration

IN Lately stone is increasingly being used in interior decoration premises. This material looks best when arranging external corners. If they have significant deviations from the geometric shape, then the stone will look especially appropriate. Because thanks to this, you won’t have to worry about leveling corners and walls.

Before laying decorative stone, you need to prepare the surface. It should be cleaned of dust, dirt, old finishing coating and prime. If the surface is too dry, it is necessary to moisten it. This ensures better absorption of the adhesive into the structure of the working wall.

First, the glue is diluted according to the instructions. It retains its properties for 2 hours. It is better to cook it in a plastic container using a drill mixer with attachments.

After mixing, leave the glue for a few minutes. Mix the mixture thoroughly. On square meter area usually requires at least 6 kg of solution.

The stone is pressed against the surface with force. After this, the construction level is used to check the correctness of its installation. Lay the stone in three rows and leave for a while. The glue dries after 2 hours. If you do not maintain this period, the laying of subsequent rows will turn out to be fragile, and the structure will collapse under its own weight.

Corners play a bigger role in the interior than it might seem at first glance. It is enough to look at their uneven or “erased” surfaces to immediately become clear: no one would call such a finish neat. Decorative corners on the corners of walls, slopes of door and window openings began to be used everywhere during repairs only in last years. Until then, the materials used to cover the joints simply changed more often than the rest of the finish.

You can appreciate the transformative effect of a decorative element even in an empty room without furniture. Based on the type of location, they are classified into two types:

Elements are also classified into those that are placed on the outer sides of the corners and those that are inserted into the internal ones. The latter can have semicircular shapes that “soften” the finish. You can make a corner with your own hands, or purchase it at a specialized store. Products are made mainly from plastic, MDF, but there are also more durable metal and stone options. Polyurethane effectively imitates various natural materials: wood, marble, sandstone, brick. Plastic corners are used not only as decoration, but also as a durable finishing element that will “outlast” wallpaper or other less durable wall surface coating. There is also a “mystical” component to the question. According to Feng Shui, the places where the “joints” of the walls are considered energy breaks, which create an imbalance and negatively affect the perception of the situation, so their edges are decorated with corners, “smoothing out” the sharpness.

What are decorative corners for?

Corners are most often “touched” by people passing by with their shoulders, elbows and carried objects. Accordingly, it is this part of the wall that is erased and scratched more than the remaining ones. To protect the joint from mechanical stress, a decorative corner is attached to it - a special type of finishing materials, a special “overlay”. It is designed to perform two functions:

Decorate the finish;
Protect the sensitive area.

In addition, finishing using these elements looks neater and the interior seems complete. Using the material, color and size, you can emphasize the features of the style used in the design of the room.

When to apply

The corner part of the wall is covered with decorative elements in several cases:

If the corner has visually noticeable defects: curvature, “dimples” or protrusions that were not corrected with plaster;
When the protruding part obstructs the passage or is located next to the “pedestrian” area. Accordingly, it will constantly be touched, erased, scratched. Over time, mechanical damage will become noticeable and negatively affect the sensitive wall finish and its appearance;
If without them the interior does not look complete;
To prevent the destruction of the outer corner of the building and give the exterior a neat appearance.

The installation of elements usually completes the renovation: they literally become the finishing touch in the design.

Plastic corner size

The standard range of sizes for PVC corners starts with 10x10 mm and ends with 50x50 mm. Between them, gradations with a difference of 5 mm are used. Parts of non-traditional sizes are made to order. An angle of 90 degrees is maintained between the two guides of the decorative element, at which all planes of the apartment must intersect. If you have a home with “crooked” walls, then you need to take appropriate measurements and contact a specialist with a request to make individual parts.

Types of decorative corners on walls

Corners are universal finishing elements. They are pasted in bathrooms, kitchens, bedrooms, balconies, offices and living rooms. Decoration is carried out using several types of elements:

Arched, for plasterboard partitions;
For ceramic tiles. The same category includes profile strips for the bathroom;
Corners made of natural and artificial stone;
Options made of wood;
Special guides for siding (exterior decoration);
Corners for ceiling and floor “joints”;
Textured options;
For external and internal corners;
Corners for door and window openings.

Each type is combined with a specific wall decoration and organically blends into specific styles. Corners are used to decorate not only walls, but also fireplaces, stoves, furniture, and “boxes” for masking communications and pipes.

Arched

Arched corners are used under plaster or glued on top of an already finished surface. “Internal” elements provide smooth straight lines. Corners for semicircular partitions are characterized by increased flexibility, which allows them to be tightly bent to curved surfaces of the base. If the decorative wall has a strict rectangular or square shape, then decorative elements can be selected from standard plastic options, designed for simple walls.

For ceramic tiles

Ceramic tiles are used to finish walls and floors in kitchens and bathrooms. At the corners, the tile seams are tightly sealed, they do not allow water to pass through, but they collect dust, dirt and grease (in the food preparation area). Also, these places are usually used by bacteria and fungi to organize their “breeding ground”. Microorganisms will not get under properly treated seams, but they can easily make a comfortable “home” on their surface. When cleaning tiles, it is recommended to pay special attention to these areas. Overlaying the corners allows you to reduce the scope of work and make the place where the walls meet reliably protected from the adhesion of dirt particles. In addition, the decorative element will competently disguise uneven tile cuts, and options that contrast with the color of the tile will add chic to the room. Corners are divided into two types:

Internal. They are used to decorate joints between walls and ceilings, floors, showers, that is, “pressed-in” corners. Usually have a convex or concave shape (fillet);
External. Used when processing protrusions.

Popular plastic is not used for decorating tiles, since the main coating can compete with polyurethane in durability and strength. We need all the finishing elements to “age” approximately equally, otherwise, due to a corner that has become unusable, the tile will have to be “disturbed” once again. Metal and ceramics are used to decorate tiled surfaces.

There are so-called “ribbon” corners. They are made of flexible plastic, produced in “reels”, are highly flexible, and can be easily replaced if necessary. This option is ideal for quick repairs.

For external and internal corners

Separately, elements are classified into external and internal. The former are used to decorate protruding joints of surfaces. The latter are used less frequently in “concave” corners. The latter are not in such dire need of protection, so overlays are only needed to decorate the finish. Inner corners usually have a semicircular concave or convex shape.

Textured corners

Textured options differ in color and pattern. They are usually made of plastic. Often the corners imitate a specific material: bricks, marble or granite surfaces, porous stone, wood (wenge, cork, oak, cherry). A variety of shades allows you to choose a contrasting or background option for a specific interior.

Wooden

Wooden corners are usually made from thin MDF plates, bamboo, cork or veneer. The materials are as light as plastic. MDF is flexible, and a decorative layer with a protective film from damage is applied to the surface of the compressed sawdust. In veneer versions, the element is made from thin wood slices, that is, it is more natural and has a natural pattern. Solid wood corners are denser. Glued to the surface, they will protrude slightly on it.

Not recommended for use natural wood in bathrooms and kitchens. Before attaching the material, it should be coated with a layer of varnish. Wooden elements Most often they are made independently. Unfortunately, a dry corner can become deformed, and strong blow give a crack. Behind natural beauty the decorated surface will have to “pay” with a lower service life.

Corners for ceilings and baseboards

Ceiling and floor skirting boards at the junctions of individual modules they have a very unsightly appearance. No matter how carefully the cuts are processed, they will slightly undermine the aesthetic picture of the interior. Decorative corners are used to disguise them. In appearance they differ from wall options: They look like small overlays that are designed to decorate a small area. For ceiling skirting boards with stucco in classic styles acquire special corners with monograms, repeating each bend of the connected straight lines. The use of elements on ceilings is not mandatory, which cannot be said about floors. Here, the baseboards are constantly in contact with the feet of guests and household members. Their “joints” can become loose, frayed and become completely unusable. The corners will save the baseboards from rapid wear.

In design compositions, the lower decorative elements sometimes echo the upper ones. This solution ensures the integrity of the composition, so ceiling and floor plinths often have the same outlines, and accordingly, identical corners are selected for their decoration.

Natural stone corners

Decorative elements made of natural stone are usually used to decorate the facades of houses. Due to the strength of the material, they serve as excellent protection against building destruction. However, with the popularization of the industrial loft, brick and stone masonry have become an organic addition not only to the exterior, but also to the interior of the house. Such corners will definitely “protrude” slightly above the surface. You should choose flat stones that will ensure a neat appearance of the entire structure. Hold them together cement mortar, that is, the corner will be monumental and installed for ten years. Elements are combined with plasterboard walls, relief plaster and wooden lining.

Artificial stone corners

Corners made of artificial stone are considered cheaper and more practical options. As a rule, imitation is made of plastic. It repeats not only the color, but also the “rough” texture of the surface. PVC is flexible, often goes beyond the “borders” of the corner and creeps onto the wall itself. This solution is used to create the illusion of naturalness of the decoration, because real stonework usually does not fit the line. Combine a corner with wallpaper and the same plastic panels.
It is important to know. Thick wallpaper is considered the most budget-friendly imitation of stone at the corners. Curly pieces are cut out of them along the contours of the pebbles and glued to the joint. Such an element will not protect the surface from scratches and damage, but it will cope with the decorative task.

Options for using a corner profile for finishing corners

The corner profile is used to decorate the following elements:

“Natural” joints between walls that are in a vertical plane;
Door and window slopes;
Places of “convergence” of ceilings, floors and walls in horizontal planes with a concave shape;
Corners of decorative partitions, including arched openings;
Joints between shower cabins, fireplaces and other “monumental” (not involving movement) interior objects and walls and floors.

A decorative element can be used to “smooth out” any “seam” at the junction of finishing materials. If previously it was necessary to carefully process the cuts so that they retained a beautiful aesthetic appearance, now they are allowed to have irregularities and chips, which will be masked by the corner.

Finishing door and window slopes

Double-glazed windows usually come with special corners that complete the installation of the window. Door sets also often include trims and trims. If the corners are left without additional protection, then you will have to pick it up and glue it yourself. The element will protect the slopes from damage and smooth out the junction of two different materials. For example, the end of the wallpaper will begin to wear off and peel off over time. No matter how smoothly you cut the finishing material on the slope, it will look untidy without additional coating. IN doorways slopes can be scratched by furniture carried through them.

The best option would be to use polyvinyl chloride corners. If necessary, it is easy to replace, and the surface texture can imitate any natural materials. By choosing a special shade, you can create an illusory transitional border between the color of the wallpaper and window frame or a doorway. Corners made of veneer or bamboo are less commonly used.

Arched doorways

Arched openings, as a rule, have one of the classic shapes: with a semicircle on top. Not every material can replicate its contours. For example, solid wood corners can only be used to decorate straight lines. Smooth transitions are decorated with elements made of flexible plastic, MDF, veneer or bamboo. All of the above options will easily follow the contours of the arch and complete the design of the doorway.

How to glue a plastic corner yourself

In addition to decorative corners, you will also need a fastening compound. For narrow elements it is not recommended to use glue, the excess of which cannot be removed from the surface without leaving a trace. Before carrying out the procedure, the joint must first be cleaned of dirt and residues of wallpaper or protruding pieces. finishing material. No corners will save an excessively uneven and bumpy surface. Then the wall is measured. The measurements are exactly transferred to a piece of corner. It is better to cut the material with a hacksaw with fine teeth. Do not forget about the joints between the corners themselves (in doorways, windows): two straight lines should end with cuts at an angle of 45 degrees. The “wrong” side of the prepared material is coated with glue and applied to the wall. Using your hands, firmly press the corner to the surface and hold it until the fastening composition “seizes”

Conclusion

There is another type of decorative corners that decorate furniture (sofas, cabinets, beds, cabinets). It is used, as a rule, to protect the joints of MDF or chipboard boards, which are especially sensitive to damage and begin to crumble over time. Special silicone corners save the little fingers of household members from constant impacts on these surfaces. In interior design, the use of these elements usually completes renovations. Their installation is akin to the final touches of a brush on an almost finished canvas, when the artist, moving away from the easel, evaluates his creation with a critical eye and corrects certain areas so that the composition becomes complete. Decorative corners have become an essential element in the design of a room, which emphasizes its neatness and beauty.

A large number of building materials in the modern market allows you to decorate the interior of a house or apartment in the most different options decor. This applies to walls, ceilings, doorways, window slopes, etc. But to give the lines a finished look and protect them from deformation, they use protective plastic corners, which are easy to install, durable, practical and affordable.

Show all

Plastic profiles to protect external wall corners

Perforated metal or plastic corners are used at the stage of plastering and leveling walls and ceilings using plasterboard. Profile options are installed to strengthen the finishing layer of putty and give joints and lines in two planes an ideal geometric shape. With these materials it is easy to level, at least visually, external and internal corners even on the most uneven surfaces.

This material for finishing external corners of walls has a number of advantages, among which experts highlight the following:

Reliable protection. No matter how carefully you treat the decorative finishing in your apartment, without using these plastic parts, after a few months abrasions, scratches, chips and other marks appear at the joints of the walls. Especially if there are pets in the room.
Elimination of cracks and gaps. The plastic corner does an excellent job of solving the problem on any curved surfaces between wall panels.
Improvement appearance. The variety of options and colors allows you to transform the decor of the room and give it a complete and beautiful shape.

But plastic corners are used not only on the external sides, they are also used for protection internal joints to hide the visible transition from different types finishing, for example, plasterboard or MDF panels with wallpaper and wall boards.

Plastic corner - production and application features

When sealing corner joints and irregularities on walls and ceilings, profiles made of silicone, polystyrene, polyurethane or polyvinyl chloride are used. Last PVC option remains the most popular and in demand due to its versatility and practicality. Such types are not used only as “plates”. When it is necessary to close the outer line of a window opening, metal analogues or MDF panels are better suited for this.

Otherwise, the popularity of PVC corner is due to its good flexibility, durability, ease of installation and adhesion of the material with various types of glue. Another advantage is the affordable price, which is why the finishing corner is used when it is necessary to decorate large premises.

According to the shape, on which the specific area of application depends, the following options for plastic corners are distinguished:

L-shaped and T-shaped. They are used to seal joints, cracks, seams and create an even edge and angle between slabs or panels of different types.
Standard (U-profile). Designed for decorating window slopes, arches, interior openings, etc.
F-shaped. Used as a material for arranging slopes to cover the junctions of PVC panels and walls.

Corners are produced in several sizes and in almost any color, like wood, natural stone, etc., depending on the specific conditions and finishing tasks. For installation at the transitions between wallpaper and decorative plaster, the smallest corner of 10x10 mm is sufficient. For others interior work they use materials with dimensions of 20x20 or 25x25, which are considered universal. Big views

(50x50 mm) are used mainly for finishing external arches and the facade of a building.

Finishing slopes and bathrooms

One of the areas of application of PVC corners in repairs and construction is the sealing of slopes of doors and windows. This material is ideal for covering external corners. Traditional technology for manufacturing slopes involves the use of plasterboard and plaster with mandatory reinforcement with a special metal profile with perforation. It allows you to create perfectly smooth surfaces and geometrically align planes, but after final finishing

the open edge remains unprotected and this is where the plastic corner comes to the rescue. They cover the ends and other external joints, as well as the intersection lines of the window sill and walls. Dimensions are selected based on the width and height of the window opening.

Such a corner is also indispensable when decorating a bathroom with tiles. An L-shaped profile covers the seam between the bathtub and the wall. Due to its properties, polyvinyl chloride is ideal for humid atmospheres and prevents the appearance of fungus at the joints and spillage of water.

Corners are also used to close cracks and joints on entrance and interior doorways, especially when used in the finishing of lining, PVC or MDF panels.

Using “arched” corners in room decor

The arched version of the doorway is becoming increasingly popular, as it gives the room a solid look and frees up real and visual space. Internal arches are most often made from metal frame with plasterboard or from wall foam blocks with a special layout.

In this case, a decorative plastic profile is used to cover joints and corner transitions from slopes to drywall. To do this, the corner must be bent correctly so that it does not crack or break. Therefore, when improving arched corners, they use a special plastic profile or cut a regular one into small segments of 25-30 cm.

For arches, an unequal angle corner measuring 17x5 mm is ideal. It bends without distortion and fits well on the adhesive base without peeling off from the edge of the wall. For a small arc radius, “hot” bending of the profile is used. To do this, it is heated during installation. construction hairdryer to a temperature of 60-70 degrees and roll it to the wall with a soft paint roller.

The process of installing plastic corners is simple. The progress of work is no different from gluing skirting boards or polyurethane glazing beads. The main thing is to properly prepare the material and handle it as carefully as possible so as not to scratch or damage it.

When gluing slopes, first measure the length of the profile at each slope corner. Most often they have a rectangular shape, which means that all joints are made at right angles and the joint line is cut at 45 degrees. For arches or multifaceted vaults, the cut angle is determined by location.

After taking measurements, they begin to cut correctly. To do this, use a sharp knife or well-sharpened scissors. If there are no such tools, then use a regular hacksaw and a ruler for an even cut. All burrs and irregularities are treated with fine-grained sandpaper. Next, a preliminary measurement is performed. The blanks are installed in place of gluing and aligned construction level and pre-fixed with masking tape in several places.

After this, it becomes clear how correctly the corner cut of the product was made at the junction of the two profiles. Sometimes it happens that a gap appears at the joint line (1-3 mm), especially for those who are working with this material for the first time. To avoid this, allow an allowance of 2-3 millimeters to the initial measurements, and erase the excess using the same sandpaper.

The gluing process and selection of suitable material

Before proceeding to the final stage of installing the plastic corner, you need to choose the right glue. IN construction stores They offer compositions called “liquid nails”, and some nail technicians use them. But this product cannot be called universal; it is only suitable for attaching thin and small profiles to a flat wall surface.

To close slopes or gaps between the tiles and the bathtub, it is better to use liquid silicone in complex arches and transitions from one material to another. It can be classic, transparent or colored, mostly white. Silicone does not shrink and does not flow, unlike liquid nails and ordinary glue, which tend to chip and crumble over time.

This is especially true for places with high level vibrations in doorways, window slopes. In the bathroom, silicone will not only securely secure the corner, but will also serve as an additional seal against water ingress and the formation of fungus due to constant humidity.

The sticker technology is simple. Silicone is applied to the inner surface of the profile along the entire length. If glue and corresponding compositions are used, then they are squeezed out of the tube pointwise, at a distance of 10-15 cm from each other. You should not cover the entire corner with glue, it will be impossible to press it evenly, and the remaining glue will stain the surrounding finish, making it difficult to remove later.

The corner is installed in the gluing area and gently pressed, and then set as evenly as possible according to the building level and ruler. Additionally, they are fixed with several pieces of adhesive tape or electrical tape so that it does not change its position. The squeezed-out glue residues are removed with a wet rag or paper napkin; when working with silicone, the excess is removed after setting and drying with a stationery knife.

When joining a horizontal and vertical profile, install the long strip first, followed by the upper one. It is also glued, but it must be applied a small amount of Apply adhesive to the corners of the joint and then allow the planks to fully set, usually this takes 15-20 minutes.

Plastic corners are used not only when decorating interior spaces, but also outdoors, in dachas, bathhouses, wooden house from timber with lining, on panel facades, etc. The material gives the structure completeness and additionally protects the wood from excess moisture and other climatic influences. Reasonable price, durability and variety of shapes and colors make a plastic corner an indispensable and reliable interior detail.

Probably every person has done renovations in an apartment with their own hands at least once in their life. Non-professionals sometimes find it difficult to cope with certain tasks.

If you can level the surfaces of the floor and ceiling without any problems, then finishing the corners of the walls is not an easy task and will require some knowledge and skills. Protecting the corners of the walls is essential if there are small children and animals in the apartment.

After all plaster mixtures They are not durable, and as soon as you touch a corner, the plaster can crumble, especially on the outer corners.

Various types of corner protection

If the corners are very skewed, you will have to spend a lot of effort and material to align them.

The inner corners are more or less protected by wallpaper, which helps hide uneven surfaces. But the outer corners are always visible and it’s not easy to hide damage here. This requires the use of a special decorative coating.

To strengthen the internal corners of walls, plaster of the corner itself and the adjacent wall is often used, and plasterboard is also used to correct and finish the corners.

You can protect corners in your apartment using different methods and materials. When using plaster, it is worth considering that this method is quite labor-intensive and time-consuming. If the corners of the walls are too uneven, then an overlay will be required. large quantity plaster not only on the corner, but also on the walls.

A special metal corner will help to form an even angle

As you know, the layer of plaster should not exceed 2 cm, otherwise cracks will appear. To close internal corner, it is necessary to use a metal counter-angle.

Pre-treat the corner of the wall with a primer, then cover the counter-shoulder with a layer of putty and, pressing, glue it.

This metal corner has reinforced mesh, which subsequently goes under the plaster and makes the angle even.

Using drywall and metal corner profile

Drywall often helps to finish corners and walls. If the corner itself is slightly curvature, a frameless method of attaching drywall is used, but if the curvature is more than 2 cm, you should use a frame made of a metal profile or wooden blocks. This method allows you to achieve almost perfectly smooth walls and ceilings, but at the same time the size of the room itself is significantly reduced.

You can trim the outer corners of the walls in the apartment using a metal corner profile. This method of protecting wall corners is the most optimal and allows you to protect the corner from any mechanical damage.

After all repair work this angle becomes completely invisible.

The standard length of a metal corner is 3 m; if necessary, it can be easily cut with metal scissors.

If the corner is straight and even, then you can attach the profile using small nails, but if there are some unevennesses, it is best to use alabaster or plaster to install the profile.

Protective metal corners allow you to achieve perfectly even corners in your apartment. Even a non-professional can handle their installation.

Use of plastic PVC corners

PVC fittings are glued on top of finishing

Today, one of the most popular ways to decorate external corners is to use plastic ones. Such wall corners have a wide range of applications and are suitable not only for decorating external corners, but also for decorating window and door slopes, panel joints and arches.

They are available in a variety of colors, some are even transparent, and have a width from 10 to 100 mm. The length of PVC corners ranges from 1.5 to 3.0 m. They are glued to ready-made corners, and are often used to complete finishing work.

Advantages of PVC corners:

affordable price;
ease of use even for beginners in repair;
a wide variety of shades;
visually straighten even very crooked corners;
long-term operation;
quite easy to care for.

Decorating a corner in this way helps to avoid destruction and mechanical damage. Before gluing PVC corners, it is necessary to determine the degree of damage to the wall corner in order to correctly select the width of the plastic corner. Then you need to use a drywall knife.

You can glue these corners in different ways:

using mounting adhesive for plastic products;
using a solution of dry putty mixture;
glue can initially be applied to the PVC corner.

Apply the adhesive according to the instructions on the surface of the corner and press the PVC corner to the wall, remove excess glue and wait until it dries completely. For best results, it is recommended to secure the plastic corners with masking tape.

Using corners made of wood and polystyrene foam

Wooden corners are not very flexible

The decor of the corners of the walls in the apartment can also be done using wooden corners. The advantages of this finish are that wood is an environmentally friendly material and has an attractive appearance.

Its plasticity allows you to apply carvings to the surface of a wooden corner, which will give the room unique design. When decorating a room in this way, it is worth considering the need to avoid sudden temperature changes, otherwise the wooden corners will become deformed. This type of corners cannot be glued in rooms with high humidity. To learn how to finish corners with putty, watch this video:

Probably the most affordable way to decorate the corners of apartment walls is a polystyrene foam corner. Such corners are easy to install and can be painted several times. They are easy to care for as they do not absorb dirt.

Such products are used in rooms with different temperatures and high moisture content.

Stone corners and their advantages

Synthetic stone is used to finish corners

Stone has recently become one of the most popular ways to decorate and strengthen wall corners.

There are more and more rooms decorated with artificial stone.

With this design method, there is no need for walls in the apartment; the use of decorative stone is especially appropriate for very uneven outer corners.

It is necessary to take into account that fake diamond much lighter and more affordable than its natural counterpart and easier to maintain and maintain.

Paste decorative rock you can do it yourself, to do this you must first clean them of dust and dirt. Then special tile adhesive is diluted according to the instructions. Apply it in a thin layer using a spatula on the stone and in a thick layer in small cakes on the wall. The stone is applied to the wall and pressed, excess mortar is removed. To learn how to trim corners with stone, watch this video:

After you have glued three rows, you should stop and let the solution dry, then you can put three more rows of decorative stone. And so gradually finish the entire surface. Thanks to huge selection colors and textures, decorative stone can be selected to suit any interior.

Combine different ways corner finishing

Following the listed types of finishing corners in an apartment, certain conclusions can be drawn. The most expensive type of finishing is artificial stone, and the most labor-intensive finishing method is considered to be leveling the corners with plasterboard. Different kinds Corner finishes can easily be combined with each other and used during repairs at the same time. External corners with such protection will be installed “in the shield” and will have an aesthetic appearance for many years.

If you are determined not to ignore corners of the apartment when decorating it, you probably know that you can do it in several ways to achieve your goal. Namely: put something in them, paint them with paints or hang photographs, fill them with shelves. But if you still have a question how decorate the corner, then you are just looking for an idea for inspiration or implementation. Which means you've come to the right place! We have selected several interesting and easy to implement ideas for decorating corners.

So in the corner of a small home gym you can place a whole house on a majestic oak tree, then the walls should be painted accordingly. Difficult? But your efforts will be more than repaid! It’s interesting, relaxing, and health-saving.

You can fill the corner of the hallway with special romantic content with the help of this simple but very cute picture.

Book of the Builder

But in the living room or hall you can create a whole family tree! Just add a derea sticker (or draw one!) and hang the photos in frames. However, even with empty frames such a tree looks great.

Book of the Builder

If you decide to decorate a corner of the room with the help of paintings, then there may be options here too. See how easy it is to turn an empty wall into a stunning exhibition space. Although, if you are thinking of using just one panoramic photo, the result may exceed all your expectations.

Book of the Builder

You can decorate the corner in the dining room and living room a little differently. So, decorative plates will add a special charm to the dining corner, and a flock of butterflies or a paper bouquet will decorate the corner of the living room or bedroom.

Book of the Builder

But in the nursery there is once again unity with nature. And even if these are just decorative birdhouses and birds, they will also teach the child to love our little brothers, and they will also give the corner a special meaning.

Book of the Builder

2. Fill the corner with pieces of furniture or design elements.

Book of the Builder

Setting up a reading corner in an empty space is a classic of the genre. Let's install it easy chair, a floor lamp and a shelf or small table for books. And to make the corner look more impressive, you can hang an inscription - a quote or an interesting illustration for your favorite book.

If you are interested in oriental motifs, then take this opportunity and install a carved screen in the corner. She, of course, will not hide the corner, but at least decorate it.

Book of the Builder

A table or stands for displaying interesting things will help make the corner somewhat attractive. What it will be: a collection you brought from your vacation or an exhibition of vegetables from your own garden - it’s up to you to decide. But this decor looks interesting in any corner.

But in the hallway you can place a high table on decorative legs in the corner and place a vase, lamp or candlesticks on it. Elegant, sweet and accessible.

Book of the Builder

A ladder or stepladder installed in a corner can become a hanger or stand. It’s not just beautiful, it’s convenient, because things placed on them will become visible and quickly accessible.

Book of the Builder

You can get a good idea for decorating corners from your grandmother in the village. These are flowers and living plants! You can use them for design for several reasons: they are beautiful, plants purify the air and moisten it, and besides, the idea of a pharmacy in a pot has not yet been canceled.

Book of the Builder

3. Place shelves and shelves in the corner.

Book of the Builder

Hanging shelves in the corner is not a new idea, but it is always relevant. These can be shelves for photos and cute trinkets or books. It is not necessary that they be in the usual format. How more interesting shape and the color of these interior elements, the more elegant the corner design will look.

Book of the Builder

4. A thread or a few more from the world interesting ideas decorating a corner

Book of the Builder

How do you like the idea of making the corner soft? Isn’t it true that such decor looks interesting and very cozy? It will be very pleasant to while away the time with a book or with friends!

Book of the Builder

Fireplace... Do you really want to get it, but are you worried that there is not enough space in the room? Build a decorative fireplace in the corner or install an electric fireplace - and you will decorate the corner and make your dream come true.

Book of the Builder

IN dark dark house, in a dark, dark corner this lamp looks just great! And he alone can give the room a special charm and chic. Maybe it's worth a try?