How to make a lampshade frame for a table lamp with your own hands. How to make a lampshade with your own hands for a floor lamp: from threads, fabric, scarves and beads. Paper lampshade

Cozy evenings with a book in your favorite chair, soulful tea parties with family in the kitchen, romantic dates with loved ones... And above all this - a familiar, familiar, traditional lampshade for table lamps, wall lamp or a floor lamp standing on the floor.

Beautiful lampshades, made by yourself, become noticeable and irreplaceable interior items. They bring a touch of romance into everyday life and fill the home atmosphere with warmth and beauty.

The material for making a lampshade can be fabric, paper, or beads. By showing imagination and patience, you can transform an old lamp shade with your own hands beyond recognition. Such an exclusive element will make the interior individual and truly homely.

Master class on making a lampshade with your own hands

A popular material from which to make a lampshade with your own hands is fabric. Linen, silk, denim, organza - any option.

A whole piece or strips of material will do. You can simply cover the frame with printed fabric and make it plain with embossed flowers from the same material.

It is important to understand in advance where exactly your lampshade will “live”. A romantic environment requires an appropriate “companion,” while strict minimalism requires another.

Expert advice: As a basis for the lamp, you can take a frame from old lamp. Making it yourself from stiff wire is also easy. And it’s worth choosing energy-saving lamps so that the fabric doesn’t catch fire.

How to make a beautiful lampshade with your own hands?

• We take a finished frame, for example, with a ring diameter of 20 centimeters on top, thirty-six centimeters on the bottom, and twenty-eight centimeters in height;
• select the fabric and cut it into strips, each four to five centimeters wide; only about twenty-five stripes;
  
• the edges of the tapes must be smooth;
  
• iron them well with an iron;
• wrap one edge of the ribbon around the top ring and sew it on by hand;
  
• now we take it down and wrap the lower ring, and again the upper one;
• when the strip ends, we secure its edge by sewing it to the fabric;
  
• take a new tape and continue;
• when the entire frame is wrapped, we sew “belts” for the edges;
• to do this, we take two strips of material of a different shade and cut out two strips from it, each length is thirteen centimeters, width is ten;
  
• iron the ribbons, bending the longitudinal edges 2.5 centimeters to the wrong side;
  
• then bend the strip in half;
• glue double-sided tape onto the frame hoops;
  
• We glue a strip of fabric onto it, slightly cutting its edge along the way so that the material lies as evenly as possible;
• We bend the second edge of the tape onto the inner surface of the case and also glue it with tape;
• In this way we decorate the top and bottom of the frame with “belts”.

You can make a border from crocheted ribbon or ruffle.

DIY lampshade made of plastic and fabric

The second homemade lampshade is also made of fabric. You can make it based on an old lampshade. Or you can transform a typical product bought in a store like this:

DIY lampshade. Photo

- the first step is to measure the circumference of the upper and lower rings, as well as the height of the frame;
- add two centimeters from each edge to the resulting dimensions so that the seams can be made;

DIY lampshade. Master Class

- take a sheet of thin plastic and cut out a rectangle or trapezoid from it - the base on which the homemade lampshade will rest;

How to make a lampshade with your own hands. Step by step photo

— cut the fabric to size, use masking tape to glue it to the table;

- glue the material onto the plastic;

Master class - DIY lampshade. Photo

— we bend the resulting part around the frame of the lampshade and fasten its edge with clamps;

- mark on the fabric the place where the seam will go;

- remove the paper clips and glue along the marked line with glue; press the joint with something heavy and let it dry;

Homemade lampshade for a lamp. Photo

- then we turn the lampshade over with our own hands and glue it inside in the same way;

— now you can glue the connection between the body and the rings;

— when everything is well fixed, remove the clamps;

- decorate the bottom and top of the lampshade using paper tape; glue it so that one edge extends beyond the ring;

— we bend the free edge into the body and glue it;

— fold a strip of fabric of a different color in length to the height of the lampshade and five centimeters wide, fold the edges inward, and iron it;

— apply glue to the inner surface of the tape and glue it together;

DIY lampshade. Step by step photo

- glue the strip to the seam on the lampshade;
- cut out two strips of paper of the same width as the finished strip for the seam; then glue it to the top and bottom edges of the lampshade; fix with clamps; Glue a strip of fabric on top of the paper.
The homemade lampshade is ready.

Ideas for making a lampshade with your own hands with photos

This “floral” lampshade will perfectly complement a romantic interior.

A little imagination - and the bouquet with variegated roses is ready.

Delicate tones create a romantic mood.

A frill of white roses is the perfect complement to a strict, simple design.

This wonderful lampshade brings back memories of grandma's napkins.

These origami-style lamps will look good in a minimalist interior.

Another representative of the ancient Japanese art of creating masterpieces from paper.

Light green-blue strokes will fit perfectly into the design of green tones.

A beautiful lampshade made from postcards or pictures of a castle

You will get a beautiful and original lampshade. We will need a picture of locks, scissors, tape, a cutter and a small lamp (lamp).

Handicrafts always attract attention and delight most people. Creation unique interior always based on the fantasies and wishes of the owner. Lighting using table lamps plays an important role. They are made from a variety of materials that can be used to create your own unique decorative lampshade.

Making a frame

To create a reliable and strong frame, it is recommended to use steel, aluminum or copper wire, since these materials have good flexibility and attractive appearance. Combination allowed different materials. The tools required for work are:

• pliers;
• round nose pliers;
• glue "Moment";
• hacksaw for metal;
• wire cutters

To take into account all the nuances, it is recommended to draw a diagram of the lamp on paper in advance and determine the size of the future frame. Made from the thickest and most flexible wire with a diameter of about 4 mm. The frame of any shape is made. The simplest is considered to be the hemispherical shape of the frame. Anything that has a shape suitable for a lampshade can become auxiliary items when performing work. This will help create the correct shape of the frame, since it is recommended to use auxiliary item like a template. On initial stage is being manufactured required quantity rings and ribs of the future frame, which are secured with thin wire and fixed with glue.

The lampshade holder is made in a similar way. The lamp socket is attached to the ring using thick wire and glue. The frame pattern is made from wire of a smaller diameter - 1 mm. An arbitrary pattern made from different types of wire of different thicknesses will create even greater attractiveness than a pattern made from one type of wire.

Wire mesh

Tools:

• pliers;
• hacksaw for metal;
• wire cutters
• as additional materials a metal rod or wire is used.

The construction mesh significantly saves time in the manufacture of the frame. From the finished weaving it is necessary to cut out parts along the contour of the pattern using a hacksaw. Typically, wire mesh lampshades have a cubic shape. From metal rod it is necessary to complete the frame. To do this, you need to bend the rod with pliers, creating the desired shape of the future frame. A lampshade of the desired shape is assembled from finished parts by stitching them together with thin metal wire. The cartridge is fixed in the lampshade using wire. Ready metal carcass can be painted with enamel.

From a five liter plastic bottle

The neck and bottom are cut off from a plastic bottle. The resulting product is the basis for the future lampshade. For correct installation For this frame, you need to install the bottle on the rack with the bottom down. The socket is attached to the lamp stand.

Attention! Certain types plastics become toxic when heated. Before making a lampshade, make sure that the materials used are safe.

Making lampshades on a frame

From tapes

When creating a sophisticated strip lampshade, hot glue or sewing threads are used. The frame is wrapped with tapes of different materials in an arbitrary manner. For reliability, the ends of the tapes are sewn to the frame. It is allowed to weave multi-colored ribbons and then secure them with hot glue, use beads, lace and other decorations.

Other interesting options

Fabric lampshade. The principle of decorating a frame with fabric is to cover it or paste it with parts pre-cut from existing material. This method is perfect for metal frames. To create a beautiful lampshade, you need to cover the frame with fabric and secure it with sewing thread.

Paper lampshade. The method is suitable for all types of frames. Parts are cut out of paper and glued to the frame. Multi-colored paper creates beautiful lighting for the room, and cut out silhouettes or arbitrary shapes will allow you to create a unique atmosphere in the room. This approach is most common in Japan, where paper products are in great demand.

Homemade lampshades without frame

From knitted lace doilies

Knitted napkins and regular PVA glue can help you create a real work of art. To work you will need a spherical template, PVA glue and knitted lace napkins. As a template, you can use a regular basin of the shape you like. The template must be smeared with glue and lace napkins placed on it. Having thickly covered the entire product with glue, leave it to dry for a while, then carefully remove it from the template. To consolidate the result, it is recommended to coat the finished product with decoupage varnish. Be sure to cut out the hole for the shade before placing the doilies on the template.

Round lampshades made of threads

A round lampshade made of threads is created using a similar method, but is used as a template. balloon, and instead of ready-made knitted napkins, ordinary yarn comes into play. After covering the inflated ball with PVA glue, wrap it with threads. Apply the remaining glue thickly to the cocoon and let it dry well. When drying is complete, pierce the ball with a needle and carefully pull it out through the hole left around the ball's end. Decoupage varnish will fix the final result, and spray paint will create a unique and unique design Your lampshade.

Important! Do not wrap multiple layers of yarn around the ball. Leaving gaps will create a cozy atmosphere and allow light to diffuse.

Creative homemade lampshades

Paper cups glued together will create a voluminous and creative lampshade. Beautiful disposable paper cups are glued to each other using hot glue, forming a hemisphere. Using multi-colored glasses, you can create a unique color for the future lampshade.

Using a similar method, you can make a lampshade from plastic cups and the bottoms of plastic bottles, but heating this material can be toxic. It is recommended to use the plastic lamp only with LED lamps, which do not heat up during operation.

Principles of room lighting

Lamp for the bedroom

To illuminate the bedroom, it is recommended to use several spotlights. Dim diffused light without glare will ensure the correct balance of light in the room. For reading, it is recommended to add a local lighting lamp to the interior, providing a directional luminous flux. When installing decorative lighting fixtures, you should keep in mind that their purpose is to unobtrusively illuminate the room and create a calm atmosphere in the bedroom.

Office lighting fixture

Office lighting should be effective in desk placement and working area. Floor lamps and table lamps do a good job of illuminating the workplace. The main requirements for lighting fixtures in the office are the possibility of their free movement and regulation luminous flux monitor: the brightness of the lamp should be higher than the brightness of the monitor to ensure concentration and preserve the health of the human visual organs.

A few words about security

When making lampshades and shades, it is necessary to take into account the location of the lamp socket and its effect on the material of the product. Should be used with caution plastic products due to their toxicity and fusibility. Highly flammable materials must be treated with a protective coating to eliminate the risk of fire. When creating a frame, pay attention to its balance, since careless impact on the device can lead to its destruction and subsequent negative consequences for the premises and human health.

Hand-made lampshades and lampshades can complement and diversify the interior of your home. Unique and high-quality products become a source of pride for their creator. Compliance with safety precautions, a responsible approach to creating a decorative lamp and the choice of high-quality materials will ensure long-lasting service of the lighting device and give positive emotions to the guests and inhabitants of your home.

Lamps are not just a source of artificial lighting in the interior, but also an important decorative element, without which the composition looks incomplete. You can create bright accents by making a lampshade for a chandelier with your own hands, because it is not at all necessary to spend huge amounts of money on the purchase designer models. Read about the nuances of work in our article!

Where to begin?

When creating a lampshade with your own hands, keep in mind that using a regular incandescent lamp is not the best idea. It is better to opt for energy-saving light bulbs that do not heat up so much and, accordingly, do not heat nearby parts, thereby ensuring safety. In addition, they are quite economical, which allows you to save money on electricity, and are also durable.

When choosing a material for a lampshade, focus on both aesthetic properties and specifications. Firstly, these must be environmentally friendly, preferably natural, bases that will not distribute unsafe substances with minimal heating.

Secondly, the lampshade should not collect a lot of dust: some surfaces, like fabric ones, are more prone to this than others. Choose an option that is easy to clean and can be easily wiped with a damp cloth. This does not apply to paper, but due to the cheapness and simplicity of the material, such a chandelier can always be replaced if necessary.

Thirdly, the chandelier should illuminate the room well without darkening it. However, for some interiors, dim lighting is more suitable: in a nursery, bedroom or living room for an intimate atmosphere. In such cases, you can show your imagination by making a lampshade that creates light patterns in the room. You, as the author, can implement any of your decisions - and this is probably the main advantage of homemade lampshades.

Selecting a lampshade to match the interior style

The chandelier can become bright accent in the interior or as an inconspicuous but important addition. With any choice, the lampshade should harmoniously match the style of the room.

Unfortunately, not every product can be created with your own hands. For example, classics are characterized by elegant crystal, glass or hardware, which you can’t make yourself. But there are other options.

Minimalism

A laconic and laconic composition of minimalism can easily be disrupted due to one extra detail, which will be especially noticeable in such an interior. Regardless of the type of room, simple geometric shapes, the absence of hanging elements, as well as a uniform color scheme that is included in the overall palette of the space will look appropriate here.

Metal ones work well frame structures, which slightly darken the light, or paper shades without decorative details.

Loft

This is where you can really go wild, in a loft interior, in which homemade products from unusual materials. It's not scary if appearance chandeliers reveal their non-manufacturing origin, because many details of this style highlight their imperfection as their main advantage.

For lampshades, you can even use familiar objects: transparent cans, metal utensils, frames made of thread or wire. If the ceiling height allows, then a long pendant chandelier with a minimalist cap would be an excellent option.

Scandinavian style

Despite its northern origin, this style of interior design looks very cozy and modern. Minimalistic in nature Scandinavian style prefers natural materials, as well as light, mostly white, colors.

There are many options for chandelier design - the style does not greatly limit the shape. But not everything can be created independently. Ball-shaped, airy models made of thread or paper are suitable.

Provence

Coming to us from distant French villages, Provence prefers a simple, cozy aesthetic. natural materials, floral patterns, as well as light shades. This is approximately what a lampshade for a chandelier should be like.

Products made of fabric or lace with a round shape look appropriate. With a small level of skill, you can decorate a glass dome with decoupage, thereby saving money - after all, despite its simplicity, authentic Provence involves significant costs in the arrangement.

Paper lamps

Despite the fact that paper is not considered the most reliable basis for lampshades, the ease of working with it and its noticeable low cost have made this material very attractive among handicrafts. In addition, with its help you can update your interior at least every month, creating new crafts.

Origami lampshades

Who wasn’t interested in origami as a child, designing little animals or complex modular paper products? Now you can use your skills for more practical purposes. However, even people who have encountered this activity for the first time can also easily master it and make origami lampshades for a chandelier with their own hands.

These are laconic designs of different geometric shapes that will fit perfectly into modern interior. It is not recommended to use very strong paper, as it does not transmit light well.

Figured products

However, lovers of more varied decor can create lampshades of a wide variety of shapes from paper. For example, surround the lamp with paper houses, butterflies or envelopes.

The appearance of such a lampshade also depends on the surface - plain, patterned, newspaper, and so on. By combining these materials, completely different effects can be achieved.

Chinese lanterns

If you have paper lanterns at home, do not rush to use them as an independent lamp, because this is an excellent basis for other experiments.

You can paste it over with anything you like, but to avoid homemade look— we suggest decorating the ball with small paper flakes or long “feathers” that will gracefully hang down to the bottom.

Lampshades made of threads

Various threads and ropes are an excellent basis for a lampshade, which is suitable for creating an intimate atmosphere due to the darkening effect.

Graceful cocoon

A round lampshade made from randomly twisted threads looks very simple and at the same time stylish. In order for such material to hold the desired shape, it is fixed with glue on a balloon, which is delicately removed after finishing the work.

Although the field for creativity here is small, you can always experiment with colors, weaving in several shades.

Knitted lampshade

This solution made from threads looks less chaotic. The main conditions for making it are the ability to knit or the presence of a grandmother who will kindly knit you a napkin. The finished product must be placed on any base - a metal frame, a transparent container, a Chinese ball. Similar to the first option, you can attach the lampshade to the balloon using glue.

Bottle lamps

Stylish chandeliers for rooms different types You can even create them from bottles. This includes both glass and plastic containers.

Glass bottles or jars

The principle of working with such a base is simple: choose the most beautiful one and hide the lamp in it. Elongated bottles or small jars can be used. It is necessary to make sure that the glass transmits the amount of light required for the room, and if there is not enough light, several sources can be used.

If the chandelier plays more of a decorative function, the bottle can be covered acrylic paint or painting.

Plastic lampshades

Plastic bottles should not be used untouched. But to make cheap parts out of them for homemade lampshade is quite real.

Luxurious (as far as this word is generally applicable to plastic) look chandeliers from the bottom of ordinary bottles, which are shaped like a flower. They are fastened together with wire for better fixation, creating a variety of compositions.

Another option is a 10-liter eggplant covered with plastic spoons, which are lined up in several rows, like scales. The design will transmit muted but uniform light, which will further decorate the product.

Lampshades made of metal elements

Enough unusual solutions Metal products are also offered for chandeliers. Fortunately, you don’t need to make them yourself, so you don’t need any special skills in working with metal. But a spectacular appearance is guaranteed in any case.

Kitchen appliances

Don't rush to throw away old spoons and forks - you will need them to create original design. By placing a dozen fixtures around the lamp, you will get an excellent shade for a kitchen chandelier that fits perfectly with the theme.

The same effect can be achieved by using, for example, a grater. In general, you can experiment with any devices, especially if your interior is decorated in a loft style. Just make sure that metal parts didn't get very hot.

Gear dome

If you want to add a little steampunk into your life, make a chandelier shade out of gears. You can get them by dismantling an old bicycle or buy them at a flea market. But the result is definitely worth the effort!

We looked at the features of making lampshades for chandeliers with our own hands and the most popular solutions from various materials. But interesting options, of course, much more - as evidenced by our selection of photographs. Enjoy watching!

The fabric for the frills can be matched to the color of the lampshade or a contrasting one. Cut it into strips, then fold each in half lengthwise and iron. Lubricate the folds with glue (fabric glue or glue gun) and glue to the lampshade, forming folds and bends. The edges of the strips don’t have to be processed - it turns out even more interesting.

Photo and source: mama-says-sew.blogspot.com

2. Lampshade with fabric roses

Roses are rolled from strips of fabric and glued to the finished lampshade.

Photo and source: creationsbykara.com

3. Lampshade decorated with coffee filters

This lampshade looks like a designer item, but is made very simply - from properly crumpled and glued coffee filters.

Photo and source: apartmenttherapy.com

4. Paper plate lampshade

Another amazing piece that is quite easy to make. On each paper plate, draw 2 parallel lines in the middle, bend the plate and glue it to the lampshade.

Photo and source: wonderfuldiy.com

5. Lampshade made of colored fabric

To make such a lampshade, you don’t need a thread or a needle, and you can use leftover fabric - for example, left over from sewing bedspreads or pillowcases for decorative pillows. The fabric needs to be cut into strips and wrapped around the frame of the lampshade, securing with fabric glue. Contrasting material can be used to decorate the upper and lower rims.

Photo and source: honestlywtf.com

6. Lace lampshade

Such a lampshade looks like a truly antique thing, especially if you use vintage or specially aged lace for it. You can take a whole lace fabric, cut out motifs from it and sew it, or crochet round motifs and sew them too. For aging, you can use tea infusion - soak the lace in it, rinse and dry. Remove the frame from the old lampshade and secure the new one to it with a lace needle and thread.

Photo and source: abeautifulmess.com

7. Lampshade made of cord or knitted yarn

By the way, if you knit, then the lampshade can be knitted - for example, with a crochet hook, from thick knitted yarn or cotton cord.

Photo and source: shelterness.com

8. Lampshade made from a sweater

But even if you don’t knit, a knitted lampshade can be made easily - for example, by using an unnecessary sweater, scarf or a piece of thick textured knitwear. Wrap the jersey fabric around the lampshade and glue the material from the inside.

Photo and source: unskinnyboppy.com

If you have long been wondering how to decorate your apartment or house without significant costs funds and time, we propose to transform light sources, namely make a lampshade for floor lamp with your own hands. You probably know that something beautiful and unusual in a store can be very expensive, but you don't have to spend a lot of money to make something amazing. We will use the most common materials that you will definitely find in your household. Any lampshade begins with a frame; if you have a ready-made one, all you have to do is decorate it; if not, don’t worry, we can easily make the base ourselves.

1. We make the frame

Any of the elements that we will later use as decor must be attached to something. In order to quickly cope with this task we will need: thick wire, pliers, cardboard. Any the frame consists at least two rings connected by spacers. Decide on the desired shape and size of the future lampshade.

Let's consider the simplest type of frame - conical. The lower ring will have a diameter of 30 cm, and the upper one - 20 cm. To to know wire length, which needs to be cut, you need to multiply the desired diameter by the number “pi” (3.14), that is, 30 * 3.14 = 94.2 cm. The ends of the wire must be connected and bent using pliers. The height of the spacers will determine the height of the lampshade itself. For the reliability of the design, we recommend making at least 4 transverse fasteners, which will be attached to the rings at an equal distance. It should roughly look like this:

If you are preparing a frame for a future fabric lampshade, then you need to wrap it with thick cardboard so that the fabric has something to attach to. To do this, do pattern. Wrap the frame in newspaper, mark the line where the newspaper makes a full turn, and leave a centimeter of margin for gluing, and a line for the top and bottom. Cut off the excess and transfer the resulting sketch onto cardboard. You can attach it to the frame using a hot-melt gun with glue, do not forget to coat the joint well, and remove excess glue with a piece of cloth. Your frame is ready, you can start decorating.

2. Paper or cardboard lampshade

Paper is the most simple And cheap material, which can be easily transformed, has many colors and different densities. The frame wrapped in cardboard can already be used as a lampshade if you decorate it a little. It may not be whole, but have holes V butterfly shape, flowers, circles, hearts, diamonds and other shapes, which can then be hung from the edge of the lampshade using a thin fishing line. Using cardboard different color you can create smooth transitions or a contrasting composition. Such a lamp will look great in, because when it emits light, small shadows in the form of carved figures will appear on the walls and ceiling.
You can decorate the cardboard frame corrugated paper or molds For baking cupcakes. Open one mold wider, drop a little in the center and place a second, more closed mold inside. You can connect three or more shapes in this way. You will end up with air outlets that need to be placed as close to each other as possible. In the end you will get very gentle and light lampshade, from which a soft, subdued light will emanate. Paper figures glued to thin strips and secured to wire frame rings are also suitable as materials. For a more aesthetic look, use paper of different colors, which will form a smooth transition from darker shades at the bottom to lighter shades at the top. Remember that paper is not a durable material, but it is easy to replace if you get bored with the appearance of the lamp and come up with something new.

3. Fabric lampshade

Depends on the desired luminous flux. Thicker and darker fabrics will give a muted, soft light. The chosen one is also important material color. Greens and blue shades will create cold lighting, and red, yellow, orange – warm. When the fabric is selected, it is necessary make a pattern. You can use the same piece of newspaper as in step 1. To make the fabric cover look more neat, sew it on a machine, then turn it inside out and put it on the frame. You can simply carefully hem the edges of the pattern, iron it and glue it to the frame with glue. In both cases, don't forget to leave stock on seams.
The cover does not have to be made from a single piece; it can be multi-colored rags or a combination of plain and colored fabric. If desired, you can draw or embroider on fabric beautiful patterns or big flowers. A hand-embroidered lampshade will definitely surprise your guests. You can glue a beautiful fringe with beads along the edge or wrap it with ribbon and tie a small bow. This way you can hide minor imperfections. To make such an item look more harmonious in the room, coordinate its color with other items. For example, with or pillows on the sofa.

4. Threads, yarn, twine

These materials will be useful to us for making lampshade-ball. Make one like this DIY lampshade Even those who are sure that needlework and crafts are not at all their element can do it. As basics we will use a balloon or an old rubber ball. We will also need PVA glue, a deep bowl and a wide brush. The essence of the method consists of winding threads around an inflated balloon. The color, thickness and number of threads used are purely individual. If you want to get a more textured and dense shade that will let in little light, use twine and wind until you cover almost the entire surface of the ball.

Before you start wrapping, lubricate the surface of the ball with rich hand cream or oil. You will thank yourself for this when you remove it from its dried-out lampshade. Pre-soak the selected threads in glue, adding a little water to it. Let them lie down and soak up this solution. This must be done so that the layers of wound threads not only adhere to the ball, but also stick together. Inflate the balloon to the desired size, draw on it with a marker border up and down. The upper bound will serve place for cartridge With . There should be no threads in these places. Start wrapping from the top edge. First, carefully lay out several turns of thread at the level of the mark. You should end up with a small circle, then bring the thread to the bottom border and do the same. If you don't want to, you can do without the bottom hole. Now that you see your limits, you can wind in different directions, creating as many intersections as possible and pulling the thread a little.
Each layer lubricate with glue using a brush. When you reach the desired density, cut the thread and hide its edge under the circle of the upper border. Leave your creation in a warm place until completely dry. Just don't put it near it under any circumstances. The flow of hot air will cause the ball to deflate faster than all the layers dry, and you will get a lampshade of any shape, but definitely not round. Once dry, puncture the ball. By the way, using threads of several colors you can achieve very interesting combinations. A composition several of these lampshades of different sizes will look very harmonious.

5. Braid, ribbons, lace

This is very romantic and the delicate appearance of the lampshade, which will look great in a young girl’s room. In order to make it, a wire frame will be enough. Cover it with fabric and glue beautiful lace on top, or place lace ribbons directly on wire rings. Textile you need to choose either contrasting color, or to match the lace. This will look more impressive. The lace may not be located along the entire perimeter, but only along the edge, this will be even more interesting. Tulle and all kinds of ruffles and bows are suitable as additional decoration.
The most interesting thing about such lampshades is openwork shadows, which they will discard. Can be used as base material colorful ribbons or a beautiful braid. To do this, fasten the edge of the first tape to the lower ring and pull it to the upper one, make one turn around it and follow it back to the lower ring. Continue in this manner until you have filled all the empty space. To avoid gaps, overlap the previous tape by at least 1/3 of its width. Carefully glue the edge of the last tape on the inside, and to hide the imperfections, make a turn along the upper and lower edges of the lampshade with a wider tape. Such a bright lampshade will resemble a rainbow and glow in different colors.
If you have knitted lace napkins, and you don’t know where to put them, you can do with them the same way as in point 4. Soak it in glue, place it on the ball and let it dry. They will take the shape of a sphere and will look completely different.

6. Lamp made of beads and artificial flowers

A very beautiful creation requires painstaking and perseverance. You will need many colors, beads or large beads, fishing line, a needle and thread and glue. It is most convenient to place flowers on a frame with cardboard. It used to be very fashionable to decorate the walls with bouquets of artificial flowers, so you probably have them collecting dust somewhere in your boxes. And in just a few hours, or even earlier, you will look at them completely differently. Separate the buds and some petals from the stems. You can even remove the plastic holders, but then you need to secure the petals with threads so that they do not fall apart. This way the parts will fit most tightly to the cardboard and stick easily. Arrange flowers and petals on the frame, filling the entire space. It's good if there is several varieties colors. You can make a beautiful flower arrangement on a lampshade made of plain fabric.
Imagine that you are making a bouquet, and you yourself will understand how best to act. Along the edge of the lampshade, you can add a fringe of several beads on a fishing line, or glue them into different places on the petals. You can glue a few butterflies or a dragonfly, in general, whatever you consider necessary. And large beads strung on a nylon thread can be used as the main material. As in the example with ribbons, it is necessary to fill the entire perimeter of the frame with beads, fixing the thread alternately on the upper and lower ring.

7. Knitted lampshade

Very unusual and the most comfortable look of our product. If you have the skills to knit various patterns yourself, then this is simply wonderful. Remember that knitting take a lot of time, so if you want to present such an item as a gift, then start preparing in advance. There are many sets with the required number of threads and pattern patterns, just choose the appropriate size. If you haven't had time to master this skill, don't be upset. They will come to your aid old knitted sweaters and children's ones that are already small for your child. Depending on the size and shape of the lampshade, you can even use sweater sleeves.
The top and bottom will have to be sheathed to prevent them from unraveling. Place the selected part on the lampshade, you can tie it with a ribbon on top and decorate it decorative elements, or you can just sew it. If wrap yarn in the color of the lampshade and cord power supply, which will be in sight, the result will be a rather nice and complete composition. Will fit as thick knitting, made with knitting needles, and a more delicate version with gaps, made crochet To secure this option, use glue. Apply it pointwise to the surface of the wire rings and press. Do not neglect fabric or cardboard frames. With their help, the shape of the ceiling will be better conveyed. Complete the composition with small knitted pompoms or large beads tied with thread. Surely all your friends will be surprised to see such an interior element.

8. Lamp made from old hangers

Broken wooden hangers, or those that are long overdue for renewal can be found in every home. Finally, you can not just throw them away, but find a more worthy use. By the way, these may not necessarily be hangers. Old ones will do too broken slats. They are quite thin and have an arched shape. Before assembling such a lampshade, immediately think about its color. If you're a stickler for all things natural, just run sandpaper over the wood surface to remove any minor imperfections, and then open it up. If you want to make the composition multi-colored, use spray paints. Now it's time to think about how we will arrange the elements on the frame. Most simple option looks like that:

The figure shows that there were deleted metal hooks, and the hangers themselves are sawn in half and simply glued to the cartridge. You can do it this way, or you can work a little harder and get a more interesting result. We will need . Remove hooks, paint hangers and drill a hole at one end. Insert the wire into the resulting hole, placing the required number of hangers on it. Now fasten the edges of the wire, and insert the cartridge with the wire into the space that is formed after fastening. Place the hangers evenly with their backs facing each other and secure them in the middle with a metal tie. You will be surprised. Making a similar lampshade for a chandelier with your own hands is not difficult and does not take long.

9. Plastic bottles, spoons

There are definitely different colors in every home. So that no one even thinks that this is a product made of this material, we suggest that you work hard and cut bottles for small details in the form of leaves, flowers, butterflies or any other shapes. We used leaf shapes. Draw a few templates of different sizes, outline their outlines and start cutting out. When you finish cutting the required number of elements, give them natural look. Using the blunt nose of small scissors, squeeze out the veins on each leaf. Pin on the frame parts can be done in two ways. Either glue a wire to each element and wrap them to the frame at different levels, or glue them to a cardboard frame with glue. We advise you to give preference to the longer, but also more beautiful, first method. So the lampshade will come out more translucent, and all the details will be noticeable due to placement at different heights.
If it's too much for you for a long time And tiring simply cut off the tops of the bottles, leaving 10 cm at the top, cut them into thin strips, bend them outward and secure with glue. Ready flowers glue to the frame.
No bottles were found, but there are a couple of sets plastic spoons after the picnic, they will also have a use. Let's do it pineapple lamp. For the frame we need a plastic 5-liter bottle. Carefully cut off the bottom and degrease the walls. Now let's prepare the spoons. You need to separate the handle, leaving about 1 cm. When you have cut all the spoons, start gluing them from the bottom row. Each subsequent row should overlap the previous one by about half a spoon. Try to cover the entire frame in this way, right up to the neck, so that you get neat edges that will be hidden under the cartridge. Your lampshade is ready!

10. Don't throw away tetrapacks

Yes, you were not mistaken, we will create real miracles, practically, from waste. Not all types of packaging are suitable for us, but only those that have a mirror surface inside. This type of lampshade will perfectly complement the interior, in which the emphasis is on various geometric shapes or where strict linear shapes predominate. You will need a lot of tetrapacks for this venture, so you will have to save for some time raw material. The packaging should be carefully cut into one solid piece. Now we cut it into strips measuring 130x21 mm, divide it into six equal parts and fold triangles from these strips.
Now comes the most the hard part– individual elements must somehow be combined into complex shapes. We cut the fastening tapes measuring 75x19 mm, fold them into four parts, unfold them back and use them to fasten two triangles. Next, according to the same scheme, you need to collect 108 hexagons and 12 pentagons. Don’t be alarmed, when you get the hang of it, everything will work out by itself. You can get by with regular glue, this will make things much easier and faster. When all the elements are ready, you can assemble them into a sphere or a regular cylindrical lampshade. In the latter case, pentagons will not be needed. Just glue all the parts together. In the case of a sphere, you will have to tinker. You can inflate the ball and use it as a support when gluing elements, and then burst it and take it out through the hole. Now you can be proud of the work you've done. You definitely won’t see such a lampshade in any store, and when you turn on the lamp, the play of shadows will captivate your whole family.

11. Newspaper tubes

IN Lately became very popular weaving products from newspaper tubes . Skillful housewives make baskets for storing various items, sew covers on them, decorate, paint and even sell them online. We thought that in this way it would be quite possible to make a beautiful lampshade for a chandelier that would look great in or. We don't even need a frame, but we will need a lot of newspapers.

If you use pages glossy magazines, then the tubes will come out much stronger. Needs to be cut a large number of paper strips, then twist the tubes. It's much easier to do using knitting knitting needle The ends must be coated with PVA glue and then allowed to dry thoroughly. Try to do so length the tubes were at least 20 cm long. We will need about 100 pieces to make a medium-sized lampshade. Take three tubes and cross them together, you will get a six-pointed snowflake.
This is the beginning of our ceiling. To make it more convenient to work, place something heavy on top of the intersection so as not to displace the workpiece. Place the next tube on top of one of the rays peeking out from under the weight. The lower element must be wrapped over the attached one so that it rests on the adjacent vine. Repeat this step with all the twigs sticking out. You will be weaving in a spiral pattern. When you have completely walked around two circles, you need to expand the diameter. To do this, instead of one twig, use two twigs folded parallel to each other. Continue weaving until you reach the required size. Cut off the excess tails with scissors, secure the edges with clothespins and treat the entire surface with glue.
Once the frame is dry with spray paint, give what he wants color and after drying, fix everything with varnish. On top you will have a cross that can be carefully cut off, thereby freeing up space for the cartridge. Instead of weaving, you can secure the tubes with glue, forming a sphere or other geometric shape.

12. New life for old cans

In order to make a stylish and unusual lampshade that will perfectly complement the interior with its soft, cozy light, you can use ordinary cans different sizes. It is necessary to remove all labels, remove any remaining glue from the surface, wash and dry well. Next we will use a small one and make holes on the walls. Draw desired with a marker pattern, Pour water into a jar and place in the freezer until completely frozen. This is done so that at the time of making holes, the jar was not deformed. The second option to preserve the shape is to stuff it tightly with paper. All that remains is to carefully make holes and dip the finished product in hot water to remove ice. You will get small cute lampshades, from which it is recommended to create compositions. The surface can be left unchanged, or it can be painted or wrapped in thin paper.

Suitable for us glass jars, especially if they have a non-standard shape and color. However, you can give them any color, it’s very simple. Prepare sockets and light bulbs in advance. To place them inside, carefully make holes in the lids using an opening knife. You may need to replace the lamp in the future, so give preference twisting banks. The hole should be equal to the diameter of the cartridge, no more. Insert the threaded part into the hole in the lid, and then screw in the light bulb. Now let's get started registration the lampshades themselves. Wash and dry the jars thoroughly. Now you can paint them, paint them, cover them with beads or flowers, wrap them with colored threads or lace, in general, whatever you want. Secure the surface painted or covered with small parts with clear varnish and screw on the lids. Your lampshades are ready.

13. Nautical lampshade

There are people who cannot live without the sea and try in every possible way to reflect their love for it in the interior of their apartment. Some people bring photo frames made of seashells, others hang pictures of the sea coast, and others cannot return from vacation without a bag of shells, which they then cannot find a use for. If you recognize yourself in this phrase, then especially for you we have prepared a small master class on making shell lampshade, as well as beautiful sea pebbles and everything you couldn’t pass by. For this we need frame, wrapped in thick cardboard, glue and your seafood gifts. Think about it in advance color lampshade. If you want to leave natural shades, then simply cover all the elements with transparent varnish; if you want to add a few different shades, then use, and then varnish. You can paint the finished lampshade, but the paint and varnish will flow into the joints between the parts and will not come out very neatly. Now, using a heat gun, cover all or part of the surface of the frame with shells, aging leave as possible less gaps. Small pebbles can be glued in places on top of the first layer, this will add volume to the finished product. Such a cute piece of furniture, with a very characteristic mood, will always remind you of pleasant moments spent on the seaside.

14. Forest handsome

Very unusual and spectacular lampshade, which will appeal to nature lovers. Fits well in interior in style eco. Its name speaks for itself, and you were not mistaken if you thought that we would use as material what we brought from the forest. More precisely, we are interested wood twigs different thickness and weird shape. Twigs that are too thin are not suitable; they will break during the fastening process. Length branches should correspond to the desired height of the lampshade. Collect material from stock, because during the manufacturing process, not all sticks will definitely suit you. The most interesting thing this type of lampshade can boast of is shadows, which will be reflected on the ceiling and walls. They will create the feeling that you are in a real forest.
The branches must be washed thoroughly under hot water and dry by placing it on paper and providing access to oxygen. You need a little dry sticks ennoble. You can use a knife to cut off what you think are unnecessary knots or thin parts. Cover all elements on all sides with spray paint or just varnish. The gnarlier the branches, the more interesting the lampshade will be. We will need a regular wire frame without cardboard. We will attach the parts to it using thin wire or glue it with a heat gun, whichever is more convenient for you. Not a conical one will work well, but cylindrical shape grounds. Fill in the gaps very carefully and leave as few empty spaces as possible. You can add gaps in small pieces. After complete drying, the extraordinary lampshade is ready for use. Creating a similar lampshade for a chandelier with your own hands will be fun with your children.

15. Space lamp

Many in childhood dreamed of becoming astronauts and raved about distant galaxies. If your child now sleeps and sees himself in this role, we suggest decorating his children's room to match his dreams. Stationery stores sell planet models, which we will need. We will make multi-level lampshades in the form of a space system.To do this, we will need sockets with lamps and several models of different planets. The layout must be carefully divide into two parts. Before doing this, draw a circle on top, the diameter of which coincides with the diameter of the cartridge. Then you need to remove this area as well. In its place, place the lamp socket and glue the layout back together. These steps must be done for all layouts. If you haven't found a planet, you can make do globes different sizes. You can use halves, which is much more convenient, because it will be easier for you to replace the light bulb. It’s good to make a lampshade from the halves table lamps. You can use old ones world maps, wrapping them around the frame on top of white, thick cardboard. The spirit of travel will always be present in your home and inspire you to new achievements.

When making any of the above types of lampshades, remember that all materials are fire hazardous. Especially when they are exposed to frequent heat from incandescent lamps. Therefore, place all the details on distance of at least 15 cm from the center of the lampshade, that is, the minimum diameter of your product must be at least 30 cm. By following this simple rule, you will protect yourself and your home from unnecessary troubles.